Search   
MSDS 
:
 Sodium Selenate Solution 40.0% w/w
CAS 
:
 7732-18-5
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | Balance | 231-791-2
|----------------|--------------------------------------|----------|-----------|
| 10102-23-5 |Sodium Selenate Decahydrate | 40.0% | unlisted
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T+
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of soap and
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Call a poison control center. If swallowed, do not induce vomiting
unless directed to do so by medical personnel. Never give anything by
mouth to an unconscious person. Get medical aid.
Inhalation:
Remove from exposure to fresh air immediately. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Do
not ingest or inhale. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Always use
a NIOSH or European Standard EN 149 approved
respirator when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: not available
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble in water.
Specific Gravity/Density:
Molecular Formula: Mixture
Molecular Weight: Not available.

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Combustible materials; strong reducing agents; finely powdered
metals; moisture; strong bases; alcohols.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, toxic fumes of sodium oxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7732-18-5: ZC0110000
CAS# 10102-23-5: VS6720000
LD50/LC50:
Not available.
Not available.
Carcinogenicity:
Water -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Sodium Selenate Decahydrate -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: SELENATES
Hazard Class: 6.1
UN Number: 2630
Packing Group: I
IMO
Shipping Name: SELENATES
Hazard Class: 6.1
UN Number: 2630
Packing Group: I
RID/ADR
Shipping Name: SELENATES
Hazard Class: 6.1
UN Number: 2630
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T+
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 8 Keep container dry.
S 17 Keep away from combustible material.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28 After contact with skin, wash immediately
with...
WGK (Water Danger/Protection)
CAS# 7732-18-5: No information available.
CAS# 10102-23-5: No information available.
United Kingdom Occupational Exposure Limits

United Kingdom Maximum Exposure Limits

Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
CAS# 10102-23-5 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
CAS# 10102-23-5: OEL-ARAB Republic of Egypt:TWA 0.2 mg(Se)/m3
OEL-AUSTRALIA:TWA 0.2 mg(Se)/m3
OEL-BELGIUM:TWA 0.2 mg(Se)/m3
OEL-DENMARK:TWA 0.1 mg(Se)/m3
OEL-FINLAND:TWA 0.1 mg(Se)/m3;STEL 0.3 mg(Se)/m3
OEL-GERMANY:TWA 0.1 mg(Se)/m3
OEL-HUNGARY:STEL 0.1 mg(Se)/m3
OEL-THE NETHERLANDS:TWA 0.2 mg(Se)/m3
OEL-THE PHILIPPINES:TWA 0.2 mg(Se)/m3
OEL-POLAND:TWA 0.1 mg(Se)/m3
OEL-SWEDEN:TWA 0.1 mg(Se)/m3
OEL-SWITZERLAND:TWA 0.1 mg(Se)/m3
OEL-TURKEY:TWA 0.2 mg(Se)/m3
OEL-UNITED KINGDOM:TWA 0.1 mg(Se)/m3
OEL IN BULGARIA, COLOMBIA, JORDAN, KOREA check ACGIH TLV
OEL IN NEW ZEALAND, SINGAPORE, VIETNAM check ACGI TLV
US FEDERAL
TSCA
CAS# 7732-18-5 is not listed on the TSCA inventory.
It is for research and development use only.
CAS# 10102-23-5 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 12/03/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Sucrose Gel Loading Dye 0-00-0
Bilirubin, 99% (UV-VIS) 635-65-4
Octylmethyldichlorosilane, 98% 14799-93-0
Trimethylsulfoxonium Iodide, 98% 1774-47-6
Hafnium(IV) oxide, 98% 12055-23-1
Glycine, Sodium Salt Hydrate 99% 6000-44-8
Tris-succinate, 99% 84540-64-7
1,6-Diaminohexane 5.0% in water 124-09-4
Hydrofluoric Acid 58.0-62.0% 7664-39-3
Hydrogen Peroxide 200 Volumes 7722-84-1
Hydrogen Peroxide 40 Volumes 7722-84-1
Methylamine 25/30% w/v Solution in Water 74-89-5
Potassium Hydroxide Solution 2M and 2.6N 1310-58-3
Sodium Chloride 0.1M (0.1N) 7647-14-5
Sodium Nitrite 0.5M(0.5N) Solution 7632-00-0
Indol-3-ylacetic acid 0.1% in lanolin 87-51-4
1,4-Dicyanobutane (Adiponitrile), 99% 111-69-3
1-Octanesulfonic acid sodium salt 0.1M 5324-84-5
Sodium persulfate solution 1M 7732-18-5
Sodium Selenate Solution 40.0% w/w 7732-18-5
1-Bromo-4,4,4-trifluorobutane, 99% 406-81-5
Ammonium Iron (III) Sulfate 0.2M (0.2N) 7783-83-7
Ammonium Iron (II) Sulfate 0.025M (0.2N) and 0.1M (0.1N) 7732-18-5
4-Chloro-2-nitrobenzyl chloride, 98% 938-71-6
L-Leucyl-L-phenylalanine-N-methylamide 0-00-0
PBNS ((3-Sulphonyl)naphthyl-(1-sulphonyl)-4,4'-diphenylmethanone 0-00-0
N-(2-Bromoethyl)-Phthalimide, 99+% 574-98-1
Poly(Vinyl Benzyl Chloride) 0-00-0
Potassium Hydroxide/Lithium Hydroxide Solution 1310-58-3
Rhodamine B Isothiocyanate 36877-69-7
SafeFix II 64-17-5
3-(2-Pyridyl)-5,6-Diphenyl-1,2,4-Triazine 99+% 1046-56-6
Bismuth Subnitrate 1304-85-4
2,6-Lutidine, Spectro Grade, 99% (GC) 108-48-5
4-Methoxybenzyloxycarbonyl azide 25474-85-5
Chloroethane 75-00-3
1-Trityl-4-Iodoimidazole 96797-15-8
95% Ethyl Alcohol 64-17-5
3-Methyl-3-Penten-2-One 565-62-8
Ethyl cis-2-amino-1-cyclohexane-carboxylate hydrochloride, 95% 1127-99-7
Carbonic Acid 124-38-9
Petroleum Ether 30/40 109-66-0
Petroleum Ether 40/60 0-00-0
Petroleum Ether 60/80 0-00-0
Petroleum Ether 80/100 108-87-2
Petroleum Ether 100/120 108-87-2
Petroleum Ether 120/140 64742-49-0
Thymol Blue 0.04% Solution 64-17-5
3-(Chloromethyl)heptane, 98+% 123-04-6
Phosphorus standards 7732-18-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net