Search   
MSDS 
:
 3-(Chloromethyl)heptane, 98+%
CAS 
:
 123-04-6
SYNONYMS 
:
 Isooctylchloride; 2-Ethylhexylchloride
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 123-04-6 |3-(Chloromethyl)heptane, 98+% | 98+ | 204-594-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to skin.

Potential Health Effects
The toxicological properties of this material have not been
investigated. Use appropriate procedures to prevent opportunities
for direct contact with the skin or eyes and to prevent inhalation.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Immediately flush
eyes with plenty of water for at least 15 minutes, occasionally
lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Remove
contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately. Do NOT induce vomiting. If conscious and
alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Flammable liquid and vapor.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Empty containers retain product residue, (liquid and/or vapor), and
can be dangerous. Keep away from heat, sparks and flame. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Exposure Limits
CAS# 123-04-6:

Russia: 10 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear chemical splash goggles. Wear safety glasses and
chemical goggles if splashing is possible.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure. Wear appropriate protective
gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Wear a NIOSH/MSHA
or European Standard EN 149 approved full-facepiece
airline respirator in the positive pressure mode with
emergency escape provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: 2.5 mbar @ 20 C
Viscosity: 1.04 MPA 20.00 deg
Boiling Point: 172 deg C @ 760.00mm Hg
Freezing/Melting Point: - 70.00 - - 0.00 deg
Autoignition Temperature: 205 deg C ( 401.00 deg F)
Flash Point: 60 deg C ( 140.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 0.0503 g/l (20 c)
Specific Gravity/Density: .8820g/cm3
Molecular Formula: C8H17Cl
Molecular Weight: 148.68

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Not available.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 123-04-6: MI8760000
LD50/LC50:
CAS# 123-04-6: Draize test, rabbit, eye: 100 mg/24H Mild; Draize
test, rabbit, skin: 500 mg Mild; Draize test, rabbit, skin: 100
mg/24H Moderate; Oral, rat: LD50 = 7340 mg/kg; Skin, rabbit: LD50 =
15800 uL/kg.
Carcinogenicity:
3-(Chloromethyl)heptane, 98+% -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: III
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.3
UN Number: 1993
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 38 Irritating to skin.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
WGK (Water Danger/Protection)
CAS# 123-04-6: 2
Canada
CAS# 123-04-6 is listed on Canada's NDSL List.
CAS# 123-04-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 123-04-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Sucrose Gel Loading Dye 0-00-0
Bilirubin, 99% (UV-VIS) 635-65-4
Octylmethyldichlorosilane, 98% 14799-93-0
Trimethylsulfoxonium Iodide, 98% 1774-47-6
Hafnium(IV) oxide, 98% 12055-23-1
Glycine, Sodium Salt Hydrate 99% 6000-44-8
Tris-succinate, 99% 84540-64-7
1,6-Diaminohexane 5.0% in water 124-09-4
Hydrofluoric Acid 58.0-62.0% 7664-39-3
Hydrogen Peroxide 200 Volumes 7722-84-1
Hydrogen Peroxide 40 Volumes 7722-84-1
Methylamine 25/30% w/v Solution in Water 74-89-5
Potassium Hydroxide Solution 2M and 2.6N 1310-58-3
Sodium Chloride 0.1M (0.1N) 7647-14-5
Sodium Nitrite 0.5M(0.5N) Solution 7632-00-0
Indol-3-ylacetic acid 0.1% in lanolin 87-51-4
1,4-Dicyanobutane (Adiponitrile), 99% 111-69-3
1-Octanesulfonic acid sodium salt 0.1M 5324-84-5
Sodium persulfate solution 1M 7732-18-5
Sodium Selenate Solution 40.0% w/w 7732-18-5
1-Bromo-4,4,4-trifluorobutane, 99% 406-81-5
Ammonium Iron (III) Sulfate 0.2M (0.2N) 7783-83-7
Ammonium Iron (II) Sulfate 0.025M (0.2N) and 0.1M (0.1N) 7732-18-5
4-Chloro-2-nitrobenzyl chloride, 98% 938-71-6
L-Leucyl-L-phenylalanine-N-methylamide 0-00-0
PBNS ((3-Sulphonyl)naphthyl-(1-sulphonyl)-4,4'-diphenylmethanone 0-00-0
N-(2-Bromoethyl)-Phthalimide, 99+% 574-98-1
Poly(Vinyl Benzyl Chloride) 0-00-0
Potassium Hydroxide/Lithium Hydroxide Solution 1310-58-3
Rhodamine B Isothiocyanate 36877-69-7
SafeFix II 64-17-5
3-(2-Pyridyl)-5,6-Diphenyl-1,2,4-Triazine 99+% 1046-56-6
Bismuth Subnitrate 1304-85-4
2,6-Lutidine, Spectro Grade, 99% (GC) 108-48-5
4-Methoxybenzyloxycarbonyl azide 25474-85-5
Chloroethane 75-00-3
1-Trityl-4-Iodoimidazole 96797-15-8
95% Ethyl Alcohol 64-17-5
3-Methyl-3-Penten-2-One 565-62-8
Ethyl cis-2-amino-1-cyclohexane-carboxylate hydrochloride, 95% 1127-99-7
Carbonic Acid 124-38-9
Petroleum Ether 30/40 109-66-0
Petroleum Ether 40/60 0-00-0
Petroleum Ether 60/80 0-00-0
Petroleum Ether 80/100 108-87-2
Petroleum Ether 100/120 108-87-2
Petroleum Ether 120/140 64742-49-0
Thymol Blue 0.04% Solution 64-17-5
3-(Chloromethyl)heptane, 98+% 123-04-6
Phosphorus standards 7732-18-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net