Search   
MSDS 
:
 1-Octanesulfonic acid sodium salt 0.1M
CAS 
:
 5324-84-5
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 5324-84-5 |1-Octanesulfonic acid sodium salt | <5.0 | 226-195-4 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | Balance | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: XI
Risk Phrases: 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and skin.The toxicological properties of this
material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May be absorbed through the skin in harmful
amounts.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Flush spill area with water. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with eyes, skin, and clothing. Avoid ingestion and
inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Keep away from acids.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 5324-84-5:

CAS# 7732-18-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: not available
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble in water.
Specific Gravity/Density:
Molecular Formula: C8H17O3S1Na1
Molecular Weight: 216.167

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
1-Octanesulfonic acid is incompatible with strong acids.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 5324-84-5 unlisted.
CAS# 7732-18-5: ZC0110000
LD50/LC50:
Not available.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
1-Octanesulfonic acid sodium salt -
Not listed by ACGIH, IARC, or NTP.
Water -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28 After contact with skin, wash immediately
with...
WGK (Water Danger/Protection)
CAS# 5324-84-5: 2
CAS# 7732-18-5: No information available.
Canada
CAS# 5324-84-5 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 5324-84-5 is not listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5324-84-5 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 12/12/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Sucrose Gel Loading Dye 0-00-0
Bilirubin, 99% (UV-VIS) 635-65-4
Octylmethyldichlorosilane, 98% 14799-93-0
Trimethylsulfoxonium Iodide, 98% 1774-47-6
Hafnium(IV) oxide, 98% 12055-23-1
Glycine, Sodium Salt Hydrate 99% 6000-44-8
Tris-succinate, 99% 84540-64-7
1,6-Diaminohexane 5.0% in water 124-09-4
Hydrofluoric Acid 58.0-62.0% 7664-39-3
Hydrogen Peroxide 200 Volumes 7722-84-1
Hydrogen Peroxide 40 Volumes 7722-84-1
Methylamine 25/30% w/v Solution in Water 74-89-5
Potassium Hydroxide Solution 2M and 2.6N 1310-58-3
Sodium Chloride 0.1M (0.1N) 7647-14-5
Sodium Nitrite 0.5M(0.5N) Solution 7632-00-0
Indol-3-ylacetic acid 0.1% in lanolin 87-51-4
1,4-Dicyanobutane (Adiponitrile), 99% 111-69-3
1-Octanesulfonic acid sodium salt 0.1M 5324-84-5
Sodium persulfate solution 1M 7732-18-5
Sodium Selenate Solution 40.0% w/w 7732-18-5
1-Bromo-4,4,4-trifluorobutane, 99% 406-81-5
Ammonium Iron (III) Sulfate 0.2M (0.2N) 7783-83-7
Ammonium Iron (II) Sulfate 0.025M (0.2N) and 0.1M (0.1N) 7732-18-5
4-Chloro-2-nitrobenzyl chloride, 98% 938-71-6
L-Leucyl-L-phenylalanine-N-methylamide 0-00-0
PBNS ((3-Sulphonyl)naphthyl-(1-sulphonyl)-4,4'-diphenylmethanone 0-00-0
N-(2-Bromoethyl)-Phthalimide, 99+% 574-98-1
Poly(Vinyl Benzyl Chloride) 0-00-0
Potassium Hydroxide/Lithium Hydroxide Solution 1310-58-3
Rhodamine B Isothiocyanate 36877-69-7
SafeFix II 64-17-5
3-(2-Pyridyl)-5,6-Diphenyl-1,2,4-Triazine 99+% 1046-56-6
Bismuth Subnitrate 1304-85-4
2,6-Lutidine, Spectro Grade, 99% (GC) 108-48-5
4-Methoxybenzyloxycarbonyl azide 25474-85-5
Chloroethane 75-00-3
1-Trityl-4-Iodoimidazole 96797-15-8
95% Ethyl Alcohol 64-17-5
3-Methyl-3-Penten-2-One 565-62-8
Ethyl cis-2-amino-1-cyclohexane-carboxylate hydrochloride, 95% 1127-99-7
Carbonic Acid 124-38-9
Petroleum Ether 30/40 109-66-0
Petroleum Ether 40/60 0-00-0
Petroleum Ether 60/80 0-00-0
Petroleum Ether 80/100 108-87-2
Petroleum Ether 100/120 108-87-2
Petroleum Ether 120/140 64742-49-0
Thymol Blue 0.04% Solution 64-17-5
3-(Chloromethyl)heptane, 98+% 123-04-6
Phosphorus standards 7732-18-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net