Search   
MSDS 
:
 6-Methoxy-4-(Methylsulfonyl)-3-Pyridinecarbonitrile
CAS 
:
 0-01-1
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| Not available |6-Methoxy-4-(Methylsulfonyl)-3-Pyridin| ca. 100 | unlisted |
| |ecarbonitrile | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22 20

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Harmful by inhalation.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the
skin. May be metabolized to cyanide which in turn acts by inhibiting
cytochrome oxidase impairing cellular respiration.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Metabolism may release cyanide, which may result in headache,
dizziness, weakness, collapse, unconsciousness and possible death.
May be harmful if swallowed.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. May be harmful if
inhaled. May be metabolized to cyanide which in turns act by
inhibiting cytochrome oxidase impairing cellular respiration.
Chronic:
May be metabolized to cyanide which in turn acts by inhibiting
cytochrome oxidase impairing cellular respiration.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 0-01-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C8H8N2SO3
Molecular Weight: 212.1276

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, oxides of sulfur, irritating and toxic fumes and
gases.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 0-01-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
6-Methoxy-4-(Methylsulfonyl)-3-Pyridinecarbonitrile -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20 Harmful by inhalation.
R 22 Harmful if swallowed.
Safety Phrases:
S 36 Wear suitable protective clothing.
WGK (Water Danger/Protection)
CAS# 0-01-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 0-01-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 0-01-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/28/2001 Revision #2 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
p-(3(S)-Pyrrolidinyloxy) N-Propylacetamide 0-01-1
3-(4-Methylphenoxy) Piperidine Hydrochloride Salt 0-01-1
3-(4-Methylsulfonylphenoxy) Piperidine 0-01-1
1-(2-Acetic)-3-(3-Chlorobenzyl) Piperiz-6-one 0-01-1
p-(3(S)-Pyrrolidinyloxy) Benzamide 0-01-1
1-Acetyl, 3-(Isopropylamino) Pyrrolidine 0-01-1
3-(3-Methylphenoxy) Piperidine 0-01-1
3-(3-Fluoro,4-Cyanophenoxy) Piperidine 0-01-1
3-(4-Trifluoromethylphenoxy) Piperidine 0-01-1
3-(2-Isopropylphenoxy) Piperidine 0-01-1
2,5-Dichloroterephthalic Acid, 95% 13799-90-1
o-Cresolphthalein Monomethyl Ester Mono-Sodium Salt 0-01-1
Sodium Sulfate, Granular, Anhydrous, Reagent ACS 7757-82-6
6-Methoxy-4-(Methylsulfonyl)-3-Pyridinecarbonitrile 0-01-1
N-(4,6-Dimethoxy-2-Pyrimidinyl)-N'-( 0-01-1
Selenious acid, 98% 7783-00-8
N-FMOC-Amino-(4-N-BOC-Piperidinyl)Carboxylic Acid 183673-66-7
4-N-BOC-1,1-Amino-Piperidinyl Carboxylic Acid 183673-71-4
N-FMOC-Amino-4-(Ethylene Ketal)Cyclohexylcarboxylic Acid 0-01-1
4-N-BOC-Amino-4-Carboxytetrahydrothiopyran 108329-81-3
4-N-BOC-Amino-4-Carboxytetrahydropyran 172843-97-9
N-FMOC-Amino-(3-N-BOC-Piperidinyl)Carboxylic Acid 0-01-1
4-N-BOC-Amino-4-Carboxy-1,1-Dioxo-Tetrahydrothiopyran 0-01-1
Toluene isopropanol mix 50/50 67-63-0
Benzonitrile, 99+%, spectrophotometric grade 100-47-0
AQUALINE AD-G Fritless Reagent Non-Chlorinated 0-00-0
AQUALINE Fritless Reagent AD Chlorinated 0-00-0
AQUALINE Buffer 67-56-1
AQUALINE Solvent CM 67-56-1
Camping Gas, Blue Butane 106-97-8
2-Mercaptopropionic acid, 95% 79-42-5
LB Agar, Miller 0-01-1
Ethyl Ether Anhydrous, HPLC Grade 60-29-7
Ethyl Ether Anhydrous, Certified ACS 60-29-7
Kerosene, odorless 8008-20-6
Ethyl alcohol, denatured for HPLC 64-17-5
Methyl alcohol, histological 67-56-1
2-Propanol, Histological 67-63-0
Buffer Solution, pH 10.00 Color-Coded Blue, Certified 584-08-7
Buffer Solution, pH 4.00, Color-Coded Red. Certified 50-00-0
Buffer Solution, pH 7.00, Color-Coded Yellow, Certified 1310-73-2
Alcohol, Histological 64-17-5
Xylenes, histological 100-41-4
Acetonitrile, Biochemical Synthesis Grade 75-05-8
Electrode Storage Solution 877-24-7
Sand, White Quartz 14808-60-7
Benzyltrimethylammonium hydroxide 40% wt solution in methanol 67-56-1
Nitric acid, fuming, certified ACS 7697-37-2
Karl Fischer Reagent Diluent 109-86-4
Karl Fischer Reagent, Stabilized 109-86-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net