Search   
MSDS 
:
 2-Mercaptopropionic acid, 95%
CAS 
:
 79-42-5
SYNONYMS 
:
 Thiolactic acid; Alpha-mercaptopropanoic acid; 2-Thiopropionic acid
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 79-42-5 |2-Mercaptopropionic acid, 95% | 95% | 201-206-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.Corrosive.Combustible
liquid.Stench.

Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears).
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns. May cause perforation of the
digestive tract.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. Inhalation may be fatal as a result of spasm,
inflammation, edema of the larynx and bronchi, chemical pneumonitis
and pulmonary edema.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Will burn if involved in a fire.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Keep away from heat, sparks and flame. Do not get
on skin or in eyes. Do not ingest or inhale. Use only in a chemical
fume hood.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 79-42-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear colorless to slightly yellow
Odor: Unpleasant odor.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 102 deg C @ 16.00mm Hg
Freezing/Melting Point: 10 - 14 deg C
Autoignition Temperature: Not available.
Flash Point: 87 deg C ( 188.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: miscible with water.
Specific Gravity/Density: 1.1970g/cm3
Molecular Formula: C3H6O2S
Molecular Weight: 106.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Has not been fully evaluated.
Conditions to Avoid:
None reported.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, strong reducing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, sulfur oxides (SOx), including
sulfur oxide and sulfur dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 79-42-5: UF5250000
LD50/LC50:
Not available.
Carcinogenicity:
2-Mercaptopropionic acid, 95% -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: THIOLACTIC ACID
Hazard Class: 6.1
UN Number: 2936
Packing Group: II
IMO
Shipping Name: THIOLACTIC ACID
Hazard Class: 6.1
UN Number: 2936
Packing Group: II
RID/ADR
Shipping Name: THIOLACTIC ACID
Hazard Class: 6.1
UN Number: 2936
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 79-42-5: No information available.
Canada
CAS# 79-42-5 is listed on Canada's DSL List.
CAS# 79-42-5 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 79-42-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
p-(3(S)-Pyrrolidinyloxy) N-Propylacetamide 0-01-1
3-(4-Methylphenoxy) Piperidine Hydrochloride Salt 0-01-1
3-(4-Methylsulfonylphenoxy) Piperidine 0-01-1
1-(2-Acetic)-3-(3-Chlorobenzyl) Piperiz-6-one 0-01-1
p-(3(S)-Pyrrolidinyloxy) Benzamide 0-01-1
1-Acetyl, 3-(Isopropylamino) Pyrrolidine 0-01-1
3-(3-Methylphenoxy) Piperidine 0-01-1
3-(3-Fluoro,4-Cyanophenoxy) Piperidine 0-01-1
3-(4-Trifluoromethylphenoxy) Piperidine 0-01-1
3-(2-Isopropylphenoxy) Piperidine 0-01-1
2,5-Dichloroterephthalic Acid, 95% 13799-90-1
o-Cresolphthalein Monomethyl Ester Mono-Sodium Salt 0-01-1
Sodium Sulfate, Granular, Anhydrous, Reagent ACS 7757-82-6
6-Methoxy-4-(Methylsulfonyl)-3-Pyridinecarbonitrile 0-01-1
N-(4,6-Dimethoxy-2-Pyrimidinyl)-N'-( 0-01-1
Selenious acid, 98% 7783-00-8
N-FMOC-Amino-(4-N-BOC-Piperidinyl)Carboxylic Acid 183673-66-7
4-N-BOC-1,1-Amino-Piperidinyl Carboxylic Acid 183673-71-4
N-FMOC-Amino-4-(Ethylene Ketal)Cyclohexylcarboxylic Acid 0-01-1
4-N-BOC-Amino-4-Carboxytetrahydrothiopyran 108329-81-3
4-N-BOC-Amino-4-Carboxytetrahydropyran 172843-97-9
N-FMOC-Amino-(3-N-BOC-Piperidinyl)Carboxylic Acid 0-01-1
4-N-BOC-Amino-4-Carboxy-1,1-Dioxo-Tetrahydrothiopyran 0-01-1
Toluene isopropanol mix 50/50 67-63-0
Benzonitrile, 99+%, spectrophotometric grade 100-47-0
AQUALINE AD-G Fritless Reagent Non-Chlorinated 0-00-0
AQUALINE Fritless Reagent AD Chlorinated 0-00-0
AQUALINE Buffer 67-56-1
AQUALINE Solvent CM 67-56-1
Camping Gas, Blue Butane 106-97-8
2-Mercaptopropionic acid, 95% 79-42-5
LB Agar, Miller 0-01-1
Ethyl Ether Anhydrous, HPLC Grade 60-29-7
Ethyl Ether Anhydrous, Certified ACS 60-29-7
Kerosene, odorless 8008-20-6
Ethyl alcohol, denatured for HPLC 64-17-5
Methyl alcohol, histological 67-56-1
2-Propanol, Histological 67-63-0
Buffer Solution, pH 10.00 Color-Coded Blue, Certified 584-08-7
Buffer Solution, pH 4.00, Color-Coded Red. Certified 50-00-0
Buffer Solution, pH 7.00, Color-Coded Yellow, Certified 1310-73-2
Alcohol, Histological 64-17-5
Xylenes, histological 100-41-4
Acetonitrile, Biochemical Synthesis Grade 75-05-8
Electrode Storage Solution 877-24-7
Sand, White Quartz 14808-60-7
Benzyltrimethylammonium hydroxide 40% wt solution in methanol 67-56-1
Nitric acid, fuming, certified ACS 7697-37-2
Karl Fischer Reagent Diluent 109-86-4
Karl Fischer Reagent, Stabilized 109-86-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net