Search   
MSDS 
:
 4-Dimethylaminobenzaldehyde
CAS 
:
 100-10-7
SYNONYMS 
:
 Ehrlich's Reagent; p-Formyldimethylaniline;     p-Dimethylaminobenzaldehyde.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 100-10-7 |4-Dimethylaminobenzaldehyde | 98 | 202-819-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed.Light sensitive.The toxicological properties of
this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation. No information regarding eye irritation
and other potential effects was found.
Skin:
May cause skin irritation. No information regarding skin irritation
and other potential effects was found.
Ingestion:
May be harmful if swallowed.
Inhalation:
The toxicological properties of this substance have not been fully
investigated. Inhalation of dust may cause respiratory tract
irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. This
material in sufficient quantity and reduced particle size is capable
of creating a dust explosion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid breathing dust.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from light. Storage under inert gas has been recommended.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 100-10-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: slightly yellow
Odor: characteristic odor
pH: Not available.
Vapor Pressure: 0.00368 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 176-177 deg C @ 17 mm Hg
Freezing/Melting Point: 74 deg C
Autoignition Temperature: 445 deg C ( 833.00 deg F)
Flash Point: 164 deg C ( 327.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 2.18 g/l @ 25C
Specific Gravity/Density:
Molecular Formula: C9H11NO
Molecular Weight: 149.19

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Unless extremely
pure, crystals are lemon-colored and may turn pink on exposure to
light.
Conditions to Avoid:
Light, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 100-10-7: CU5775000
LD50/LC50:
CAS# 100-10-7: Oral, mouse: LD50 = 800 mg/kg.
Carcinogenicity:
4-Dimethylaminobenzaldehyde -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
WGK (Water Danger/Protection)
CAS# 100-10-7: 2
Canada
CAS# 100-10-7 is listed on Canada's DSL List.
CAS# 100-10-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 100-10-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/18/1998 Revision #3 Date: 7/27/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Chloro-3-methylthiophene 14345-97-2
Formaldehyde, reagent ACS, 37 wt% solution, stabilized with 10-15% 50-00-0
Tin (IV) Oxide, 99.9% 18282-10-5
4-Dimethylaminobenzaldehyde 100-10-7
4-Cymene (pract), 96% (gc) 99-87-6
Triphenylcarbenium Pentachlorostannate 15414-98-9
1,1,1-Trichloroethane, 93% (GC) 71-55-6
N,N,N',N'-Tetramethyl-1,4-butanediamine, 97% 111-51-3
Boc-L-Leucine Hydrate, 99+% 13139-15-6
FMOC-L-Glutamine, 98% 71989-20-3
Bismuth, shot, 99.999% 7440-69-9
1,1,2-Trichlorotrifluoroethane, 99+% spectrophotometric grade 76-13-1
Hydrogen Hexachloroplatinate(IV) Hydrate Reagents ACS (Crystals) 16941-12-1
5-Sulfosalicylic acid dihydrate, reagent ACS 97-05-2
Thymol blue, reagent acs 76-61-9
Tris(1,10-phenanthroline)iron(II) sulfate solution 7732-18-5
Potassium fluoride hydrate, 99% 13455-21-5
Silicon Atomic Absorption Standard Solution, 1 mg/ml Si in 2 wt.% 1310-73-2
Starch (Soluble), Reagent ACS 9005-84-9
Titanium(III) chloride, H2 reduced 7705-07-9
(S)-1,2,4-Butanetriol Trimethanesulfonate, 97-99% 99520-81-7
Tween 80 9005-65-6
2,3,5-Triphenyl-2H-tetrazolium chloride, 98% 298-96-4
Titanium (IV) Oxide, 99% Anatase Powder 13463-67-7
DL-Malic acid 617-48-1
Boc-L-Glutamic Acid 5-Benzylester, 99% 13574-13-5
FMOC-L-Phenylalanine, 98% 35661-40-6
N-Alfa-Fmoc-N-Epsilon-Boc-L-Lysine, 99% 71989-26-9
D-(+)-Glyceraldehyde, 80-90 Wt % Aqueous Solution 453-17-8
Mordant Orange 1 2243-76-7
Etoh, anhydrous, denat. with up to 5% mek and meoh/etoac 64-17-5
9,10-Anthracenedicarboxaldehyde, 80% 7044-91-9
Sulfuric acid, 0.1N standard solution 7664-93-9
Boc-L-Valine, 99+% 13734-41-3
Titanium(IV) Chloride, 99.9% 7550-45-0
Uridine, 99% 58-96-8
Potassium Bisulfate C.P. 7646-93-7
all-trans-Retinyl acetate, 1.5 million IU/g, in sunflower oil, 127-47-9
Cadmium Sulfate, P.A. 10124-36-4
n-Dodecyl-beta-D-maltoside (high purity), 99% 69227-93-6
3-Aminophthalhydrazide, also known as Luminol 521-31-3
1,2-Dimethylcyclohexane, 98%, Mixture of Cis and Trans 583-57-3
N,N,N',N'-Tetramethyl-p-phenylenediamine dihydrochloride, 99% (titr.) 637-01-4
FMOC-L-Isoleucine, 99% 71989-23-6
Silica gel, 75-300 mesh 7631-86-9
3-Endo-Aminobicyclo(2,2,1,)Heptane-2-Endo-Carboxylic Acid, 98% 0-01-1
6-Chloro-1,3-Dimethyluracil 6972-27-6
Vinyloxytrimethylsilane 6213-94-1
3-Chloro-L-alanine 2731-73-9
Zinc, Dust 7440-66-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net