**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 13455-21-5 |POTASSIUM FLUORIDE HYDRATE, 99% | 99 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 23/24/25
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Toxic by inhalation, in contact with skin and if
swallowed.Toxic.Hygroscopic (absorbs moisture from the air).
Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns. Exposure to particulates or solution may cause
conjunctivitis, ulceration, and corneal abnormalities.
Skin:
May cause severe irritation and possible burns. Toxic in contact
with skin.
Ingestion:
Poison by ingestion. May cause severe digestive tract irritation
with abdominal pain, nausea, vomiting and diarrhea.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. Inhalation may be fatal as a result of spasm,
inflammation, edema of the larynx and bronchi, chemical pneumonitis
and pulmonary edema. Toxic if inhaled.
Chronic:
Chronic inhalation and ingestion may cause chronic fluoride
poisoning (fluorosis) characterized by weight loss, weakness,
anemia, brittle bones, and stiff joints. Chronic inhalation may
cause nasal septum ulceration and perforation.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Substance is noncombustible.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower.
Exposure Limits
CAS# 13455-21-5:
United States OSHA: 2.5 mg/m3 TWA (as F) (listed under
Fluorides).2.5 mg/m3 TWA (as F) (listed under Fluorides).
France - VME: (listed as fluorides): 2.5 mg/m3 VME (as F)
Germany: (listed as fluorides): 2.5 mg/m3 VME (as F)
Malaysia: (listed as fluorides): 2.5 mg/m3 TWA (as F)
Netherlands: (listed as fluorides): 3.5 mg/m3 STEL (as F)
Personal Protective Equipment
Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear a chemical apron.
Respirators:
A NIOSH/MSHA approved air purifying dust or mist
respirator or European Standard EN 149.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Crystalline powder
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 156 deg C @ 760.00mm Hg
Freezing/Melting Point: 41 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble in water
Specific Gravity/Density: 2.4540g/cm3
Molecular Formula: FK.xH2O
Molecular Weight: 58.09
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Exposure to moist air or water.
Incompatibilities with Other Materials:
Strong acids.
Hazardous Decomposition Products:
Hydrogen fluoride gas.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 13455-21-5: TT0705000
LD50/LC50:
Not available.
Carcinogenicity:
POTASSIUM FLUORIDE HYDRATE, 99% -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: POTASSIUM FLUORIDE
Hazard Class: 6.1
UN Number: 1812
Packing Group: III
IMO
Shipping Name: POTASSIUM FLUORIDE, LIQUID
Hazard Class: 6.1
UN Number: 1812
Packing Group: III
RID/ADR
Shipping Name: POTASSIUM FLUORIDE
Hazard Class: 6.1
UN Number: 1812
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 23/24/25 Toxic by inhalation, in contact with skin
and if swallowed.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 13455-21-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 13455-21-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13455-21-5 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #2 Date: 10/08/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2-Chloro-3-methylthiophene
| 14345-97-2 |
|
Formaldehyde, reagent ACS, 37 wt% solution, stabilized with 10-15%
| 50-00-0 |
|
Tin (IV) Oxide, 99.9%
| 18282-10-5 |
|
4-Dimethylaminobenzaldehyde
| 100-10-7 |
|
4-Cymene (pract), 96% (gc)
| 99-87-6 |
|
Triphenylcarbenium Pentachlorostannate
| 15414-98-9 |
|
1,1,1-Trichloroethane, 93% (GC)
| 71-55-6 |
|
N,N,N',N'-Tetramethyl-1,4-butanediamine, 97%
| 111-51-3 |
|
Boc-L-Leucine Hydrate, 99+%
| 13139-15-6 |
|
FMOC-L-Glutamine, 98%
| 71989-20-3 |
|
Bismuth, shot, 99.999%
| 7440-69-9 |
|
1,1,2-Trichlorotrifluoroethane, 99+% spectrophotometric grade
| 76-13-1 |
|
Hydrogen Hexachloroplatinate(IV) Hydrate Reagents ACS (Crystals)
| 16941-12-1 |
|
5-Sulfosalicylic acid dihydrate, reagent ACS
| 97-05-2 |
|
Thymol blue, reagent acs
| 76-61-9 |
|
Tris(1,10-phenanthroline)iron(II) sulfate solution
| 7732-18-5 |
|
Potassium fluoride hydrate, 99%
| 13455-21-5 |
|
Silicon Atomic Absorption Standard Solution, 1 mg/ml Si in 2 wt.%
| 1310-73-2 |
|
Starch (Soluble), Reagent ACS
| 9005-84-9 |
|
Titanium(III) chloride, H2 reduced
| 7705-07-9 |
|
(S)-1,2,4-Butanetriol Trimethanesulfonate, 97-99%
| 99520-81-7 |
|
Tween 80
| 9005-65-6 |
|
2,3,5-Triphenyl-2H-tetrazolium chloride, 98%
| 298-96-4 |
|
Titanium (IV) Oxide, 99% Anatase Powder
| 13463-67-7 |
|
DL-Malic acid
| 617-48-1 |
|
Boc-L-Glutamic Acid 5-Benzylester, 99%
| 13574-13-5 |
|
FMOC-L-Phenylalanine, 98%
| 35661-40-6 |
|
N-Alfa-Fmoc-N-Epsilon-Boc-L-Lysine, 99%
| 71989-26-9 |
|
D-(+)-Glyceraldehyde, 80-90 Wt % Aqueous Solution
| 453-17-8 |
|
Mordant Orange 1
| 2243-76-7 |
|
Etoh, anhydrous, denat. with up to 5% mek and meoh/etoac
| 64-17-5 |
|
9,10-Anthracenedicarboxaldehyde, 80%
| 7044-91-9 |
|
Sulfuric acid, 0.1N standard solution
| 7664-93-9 |
|
Boc-L-Valine, 99+%
| 13734-41-3 |
|
Titanium(IV) Chloride, 99.9%
| 7550-45-0 |
|
Uridine, 99%
| 58-96-8 |
|
Potassium Bisulfate C.P.
| 7646-93-7 |
|
all-trans-Retinyl acetate, 1.5 million IU/g, in sunflower oil,
| 127-47-9 |
|
Cadmium Sulfate, P.A.
| 10124-36-4 |
|
n-Dodecyl-beta-D-maltoside (high purity), 99%
| 69227-93-6 |
|
3-Aminophthalhydrazide, also known as Luminol
| 521-31-3 |
|
1,2-Dimethylcyclohexane, 98%, Mixture of Cis and Trans
| 583-57-3 |
|
N,N,N',N'-Tetramethyl-p-phenylenediamine dihydrochloride, 99% (titr.)
| 637-01-4 |
|
FMOC-L-Isoleucine, 99%
| 71989-23-6 |
|
Silica gel, 75-300 mesh
| 7631-86-9 |
|
3-Endo-Aminobicyclo(2,2,1,)Heptane-2-Endo-Carboxylic Acid, 98%
| 0-01-1 |
|
6-Chloro-1,3-Dimethyluracil
| 6972-27-6 |
|
Vinyloxytrimethylsilane
| 6213-94-1 |
|
3-Chloro-L-alanine
| 2731-73-9 |
|
Zinc, Dust
| 7440-66-6 |
|
|