Search   
MSDS 
:
 2-Formylbenzenesulfonic Acid, Sodium Salt, Tech. 90%
CAS 
:
 1008-72-6
SYNONYMS 
:
 Benzaldehyde-2-sulfonic acid, sodium salt
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1008-72-6 |2-FORMYLBENZENESULFONIC ACID, SODIUMSA| 90 | 213-758-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Air sensitive.The toxicological properties of this material have not
been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1008-72-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density:
Molecular Formula: C7H5O4SNa
Molecular Weight: 208.17

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1008-72-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-FORMYLBENZENESULFONIC ACID, SODIUMSALT -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 1008-72-6: 1
Canada
CAS# 1008-72-6 is listed on Canada's DSL List.
CAS# 1008-72-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1008-72-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/23/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(-)-beta-Pinene, 98% 18172-67-3
2-Chloro-3-Nitropyridine, 99+% 5470-18-8
2,4,6-Tri(2-Pyridyl)-S-Triazine, 99% (titr.) 3682-35-7
1,3-Cyclohexanedione, 97% stabilized with 3% sodium chloride 504-02-9
2,4,6-Tri-Tert-Butylnitrobenzene, 99% 4074-25-3
Oxalacetic acid, 98% (titr.) 328-42-7
All-Trans-Retinol, 99%+(TLC) 68-26-8
2-Bromo-4-Chlorophenol, 99+% 695-96-5
3-Fluorobenzamide, 99% 455-37-8
2-Chloro-6-fluorotoluene, 97% 443-83-4
1-Methyl-4-(methylamino)piperidine, tech., 90% 73579-08-5
11-Aminoundecanoic Acid, 99% 2432-90-8
Cadmium iodide, 99% 7790-80-9
3-Amino-L-Tyrosine Dihydrochloride Mono- Hydrate 23279-22-3
N,N-Dipropylacetamide, 99+% (GC) 1116-24-1
Cyclododecane Epoxide, 99% (Mixture of Cis and Trans Isomers) 286-99-7
4-Methyl-2-Oxopentanoic Acid, Sodium Salt, Hydrate, 98+% 332360-07-3
Dl-isoproterenol hydrochloride, 98% 949-36-0
Rhenium, powder, 99.99% 7440-15-5
5,6-Dihydro-2,4,4,6-Tetramethyl-4H-1,3-Oxazine, Tech., 85% 26939-18-4
alpha-Naphthoflavone, 99.5+% 604-59-1
Trimethylsilyl cyanide, 98% 7677-24-9
2-Chloropyrazine,98% 14508-49-7
2-Formylbenzenesulfonic Acid, Sodium Salt, Tech. 90% 1008-72-6
4-Bromoisoquinoline, 98% 1532-97-4
Cyclopentylacetic acid, 97% 1123-00-8
Methyl diethylphosphonoacetate, 98% 1067-74-9
(4-Fluorophenyl)-(2-thienyl) ketone, 97% 579-49-7
2-Amino-6-picoline, 98% 1824-81-3
(r)-4-Isopropyl-2-oxazolidinone, 99% (99% e.e.) 95530-58-8
Pyridine hydrochloride, 98% 628-13-7
(2R)-Bornane-10,2-Sultam, 99+% (>99% e.e.) 94594-90-8
3-Dimethylamino-1-propanol, 99% 3179-63-3
2-Adamantanamine hydrochloride, 99% 10523-68-9
2-Fluorophenol, 98% 367-11-3
3-Picoline-n-oxide, 98% 1003-73-2
Aurintricarboxylic Acid, Trisodium Salt 13186-45-3
2-Piperidineethanol, 95% 1484-84-0
4-Hydroxycinnamic Acid, 98% Predominantly Trans 501-98-4
3-Hydroxytyramine Hydrochloride, 99% 62-31-7
9-Methyl-Delta-5(10)-Octaline-1,6-Dione, 99% 20007-72-1
Ruthenium red 11103-72-3
1,4-Butanediol, 99+% 110-63-4
2-(4-Chlorophenyl)malondialdehyde, 95+% (NMR) 0-00-1
Carbazole, 96% 86-74-8
Indigo, Synthetic 482-89-3
1,3,5-Benzenetricarboxylic acid, 98% 554-95-0
Nile Blue A (Cert) 2381-85-3
2,2,5,5-Tetramethyl-4-Ethyl-3-Imidazoline- - 3-Oxide-1-Oxyl, Free 66582-85-2
2-Hydroxyethyl acetate (prac) 542-59-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net