Search   
MSDS 
:
 Methyl diethylphosphonoacetate, 98%
CAS 
:
 1067-74-9
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1067-74-9 |Methyl diethylphosphonoacetate | 98% | 213-938-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Runoff from fire control or dilution water may
cause pollution.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin,
and clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1067-74-9:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear a chemical apron.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 127 - 131 deg C @ 9.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.1450g/cm3
Molecular Formula: C7H15O5P
Molecular Weight: 210.17

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not currently available.
Conditions to Avoid:
No specific conditions to avoid noted.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of phosphorus, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1067-74-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Methyl diethylphosphonoacetate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 1067-74-9: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1067-74-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1067-74-9 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #3 Date: 2/18/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(-)-beta-Pinene, 98% 18172-67-3
2-Chloro-3-Nitropyridine, 99+% 5470-18-8
2,4,6-Tri(2-Pyridyl)-S-Triazine, 99% (titr.) 3682-35-7
1,3-Cyclohexanedione, 97% stabilized with 3% sodium chloride 504-02-9
2,4,6-Tri-Tert-Butylnitrobenzene, 99% 4074-25-3
Oxalacetic acid, 98% (titr.) 328-42-7
All-Trans-Retinol, 99%+(TLC) 68-26-8
2-Bromo-4-Chlorophenol, 99+% 695-96-5
3-Fluorobenzamide, 99% 455-37-8
2-Chloro-6-fluorotoluene, 97% 443-83-4
1-Methyl-4-(methylamino)piperidine, tech., 90% 73579-08-5
11-Aminoundecanoic Acid, 99% 2432-90-8
Cadmium iodide, 99% 7790-80-9
3-Amino-L-Tyrosine Dihydrochloride Mono- Hydrate 23279-22-3
N,N-Dipropylacetamide, 99+% (GC) 1116-24-1
Cyclododecane Epoxide, 99% (Mixture of Cis and Trans Isomers) 286-99-7
4-Methyl-2-Oxopentanoic Acid, Sodium Salt, Hydrate, 98+% 332360-07-3
Dl-isoproterenol hydrochloride, 98% 949-36-0
Rhenium, powder, 99.99% 7440-15-5
5,6-Dihydro-2,4,4,6-Tetramethyl-4H-1,3-Oxazine, Tech., 85% 26939-18-4
alpha-Naphthoflavone, 99.5+% 604-59-1
Trimethylsilyl cyanide, 98% 7677-24-9
2-Chloropyrazine,98% 14508-49-7
2-Formylbenzenesulfonic Acid, Sodium Salt, Tech. 90% 1008-72-6
4-Bromoisoquinoline, 98% 1532-97-4
Cyclopentylacetic acid, 97% 1123-00-8
Methyl diethylphosphonoacetate, 98% 1067-74-9
(4-Fluorophenyl)-(2-thienyl) ketone, 97% 579-49-7
2-Amino-6-picoline, 98% 1824-81-3
(r)-4-Isopropyl-2-oxazolidinone, 99% (99% e.e.) 95530-58-8
Pyridine hydrochloride, 98% 628-13-7
(2R)-Bornane-10,2-Sultam, 99+% (>99% e.e.) 94594-90-8
3-Dimethylamino-1-propanol, 99% 3179-63-3
2-Adamantanamine hydrochloride, 99% 10523-68-9
2-Fluorophenol, 98% 367-11-3
3-Picoline-n-oxide, 98% 1003-73-2
Aurintricarboxylic Acid, Trisodium Salt 13186-45-3
2-Piperidineethanol, 95% 1484-84-0
4-Hydroxycinnamic Acid, 98% Predominantly Trans 501-98-4
3-Hydroxytyramine Hydrochloride, 99% 62-31-7
9-Methyl-Delta-5(10)-Octaline-1,6-Dione, 99% 20007-72-1
Ruthenium red 11103-72-3
1,4-Butanediol, 99+% 110-63-4
2-(4-Chlorophenyl)malondialdehyde, 95+% (NMR) 0-00-1
Carbazole, 96% 86-74-8
Indigo, Synthetic 482-89-3
1,3,5-Benzenetricarboxylic acid, 98% 554-95-0
Nile Blue A (Cert) 2381-85-3
2,2,5,5-Tetramethyl-4-Ethyl-3-Imidazoline- - 3-Oxide-1-Oxyl, Free 66582-85-2
2-Hydroxyethyl acetate (prac) 542-59-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net