Search   
MSDS 
:
 1-Methyl-4-(methylamino)piperidine, tech.,  90%
CAS 
:
 73579-08-5
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 73579-08-5 |1-methyl-4-(methylamino)piperidine, te| 90 | 277-542-1 |
| |ch., 90% | | |
+----------------+--------------------------------------+----------+-----------+
Risk Phrases: 10

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.
Appearance: clear yellow. Flash Point: 55 deg C.
Not available.
Target Organs: None.

Potential Health Effects
The toxicological properties of this material have not been
investigated. Use appropriate procedures to prevent opportunities
for direct contact with the skin or eyes and to prevent inhalation.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of soap and water for at
least 15 minutes while removing contaminated clothing and shoes.
Remove contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure to fresh air
immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
Flammable Liquid.
Extinguishing Media:
Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material, (e.g., dry sand or earth), then
place into a chemical waste container. Clean up spills immediately,
observing precautions in the Protective Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Empty containers retain product residue, (liquid and/or vapor), and
can be dangerous. Avoid contact with heat, sparks and flame. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels.

Exposure Limits
+--------------------+-------------------+-------------------+-----------------+
| Chemical Name | ACGIH | NIOSH |OSHA - Final PELs|
|--------------------|-------------------|-------------------|-----------------|
| 1-methyl-4-(methyla|none listed |none listed |none listed |
| mino)piperidine, te| | | |
| ch., 90% | | | |
+--------------------+-------------------+-------------------+-----------------+

OSHA Vacated PELs:
1-methyl-4-(methylamino)piperidine, tech., 90%:
No OSHA Vacated PELs are listed for this chemical.

Personal Protective Equipment

Eyes:
Wear chemical goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR ??1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant a respirator's use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Not available.
Appearance: clear yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 0 deg C
Autoignition Temperature: Not available.
Flash Point: 55 deg C ( 131.00 deg F)
NFPA Rating: Not published.
Explosion Limits, Lower: Not available.
Upper: Not available.
Decomposition Temperature:
Solubility:
Specific Gravity/Density: .8820g/cm3
Molecular Formula: C7H16N2
Molecular Weight: 128.22

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Not available.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Not available.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 73579-08-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-methyl-4-(methylamino)piperidine, tech., 90% -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Chemical waste generators must determine whether a discarded chemical is classif
as a hazardous waste.
US EPA guidelines for the classification determination are listed in 40 CFR Part
Additionally, waste generators must consult state and local hazardous waste regu
ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

**** SECTION 14 - TRANSPORT INFORMATION ****

CDG/CPL
Not classified as hazardous for supply.
Canadian TDG
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
R 10 Flammable.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
WGK (Water Danger/Protection)
CAS# 73579-08-5: No information available.
United Kingdom Occupational Exposure Limits

Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
WHMIS: Not available.
CAS# 73579-08-5 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 73579-08-5 is not listed on the TSCA inventory.
It is for research and development use only.
Health & Safety Reporting List
None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
None of the chemicals in this material have a SNUR under TSCA.
SARA
Section 302 (RQ)
None of the chemicals in this material have an RQ.
Section 302 (TPQ)
None of the chemicals in this product have a TPQ.
Section 313
No chemicals are reportable under Section 313.
Clean Air Act:
This material does not contain any hazardous air pollutants.
This material does not contain any Class 1 Ozone depletors.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #1 Date: 8/02/2000

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(-)-beta-Pinene, 98% 18172-67-3
2-Chloro-3-Nitropyridine, 99+% 5470-18-8
2,4,6-Tri(2-Pyridyl)-S-Triazine, 99% (titr.) 3682-35-7
1,3-Cyclohexanedione, 97% stabilized with 3% sodium chloride 504-02-9
2,4,6-Tri-Tert-Butylnitrobenzene, 99% 4074-25-3
Oxalacetic acid, 98% (titr.) 328-42-7
All-Trans-Retinol, 99%+(TLC) 68-26-8
2-Bromo-4-Chlorophenol, 99+% 695-96-5
3-Fluorobenzamide, 99% 455-37-8
2-Chloro-6-fluorotoluene, 97% 443-83-4
1-Methyl-4-(methylamino)piperidine, tech., 90% 73579-08-5
11-Aminoundecanoic Acid, 99% 2432-90-8
Cadmium iodide, 99% 7790-80-9
3-Amino-L-Tyrosine Dihydrochloride Mono- Hydrate 23279-22-3
N,N-Dipropylacetamide, 99+% (GC) 1116-24-1
Cyclododecane Epoxide, 99% (Mixture of Cis and Trans Isomers) 286-99-7
4-Methyl-2-Oxopentanoic Acid, Sodium Salt, Hydrate, 98+% 332360-07-3
Dl-isoproterenol hydrochloride, 98% 949-36-0
Rhenium, powder, 99.99% 7440-15-5
5,6-Dihydro-2,4,4,6-Tetramethyl-4H-1,3-Oxazine, Tech., 85% 26939-18-4
alpha-Naphthoflavone, 99.5+% 604-59-1
Trimethylsilyl cyanide, 98% 7677-24-9
2-Chloropyrazine,98% 14508-49-7
2-Formylbenzenesulfonic Acid, Sodium Salt, Tech. 90% 1008-72-6
4-Bromoisoquinoline, 98% 1532-97-4
Cyclopentylacetic acid, 97% 1123-00-8
Methyl diethylphosphonoacetate, 98% 1067-74-9
(4-Fluorophenyl)-(2-thienyl) ketone, 97% 579-49-7
2-Amino-6-picoline, 98% 1824-81-3
(r)-4-Isopropyl-2-oxazolidinone, 99% (99% e.e.) 95530-58-8
Pyridine hydrochloride, 98% 628-13-7
(2R)-Bornane-10,2-Sultam, 99+% (>99% e.e.) 94594-90-8
3-Dimethylamino-1-propanol, 99% 3179-63-3
2-Adamantanamine hydrochloride, 99% 10523-68-9
2-Fluorophenol, 98% 367-11-3
3-Picoline-n-oxide, 98% 1003-73-2
Aurintricarboxylic Acid, Trisodium Salt 13186-45-3
2-Piperidineethanol, 95% 1484-84-0
4-Hydroxycinnamic Acid, 98% Predominantly Trans 501-98-4
3-Hydroxytyramine Hydrochloride, 99% 62-31-7
9-Methyl-Delta-5(10)-Octaline-1,6-Dione, 99% 20007-72-1
Ruthenium red 11103-72-3
1,4-Butanediol, 99+% 110-63-4
2-(4-Chlorophenyl)malondialdehyde, 95+% (NMR) 0-00-1
Carbazole, 96% 86-74-8
Indigo, Synthetic 482-89-3
1,3,5-Benzenetricarboxylic acid, 98% 554-95-0
Nile Blue A (Cert) 2381-85-3
2,2,5,5-Tetramethyl-4-Ethyl-3-Imidazoline- - 3-Oxide-1-Oxyl, Free 66582-85-2
2-Hydroxyethyl acetate (prac) 542-59-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net