Search   
MSDS 
:
 Pyridine hydrochloride, 98%
CAS 
:
 628-13-7
SYNONYMS 
:
 Pyridinium chloride; Pyridinium monochloride
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 628-13-7 |Pyridine hydrochloride | 98 | 211-027-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.
Irritating to eyes, respiratory system and skin.Hygroscopic (absorbs
moisture from the air).

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May be harmful if swallowed.
Inhalation:
Causes irritation of mucous membrane. Causes upper respiratory tract
irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Do NOT get water
inside containers. Use water spray, dry chemical, carbon dioxide, or
appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation. Do
not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Do not ingest or inhale. Wash clothing before reuse. Keep
from contact with moist air and steam.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 628-13-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: White - Light Brown Moist Solid
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 222 - 224 deg C @ 760.00mm Hg
Freezing/Melting Point: 145 - 147 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density:
Molecular Formula: C5H5N.HCl
Molecular Weight: 115.56

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, carbon dioxide,
nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 628-13-7: UT4375000
LD50/LC50:
CAS# 628-13-7: Dermal, guinea pig: LD50 = 2500 uL/kg; Oral, rat:
LD50 = 1600 mg/kg.
Oral, rat: LD50 = 1600
Carcinogenicity:
Pyridine hydrochloride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 628-13-7: No information available.
Canada
CAS# 628-13-7 is listed on Canada's NDSL List.
CAS# 628-13-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 628-13-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/12/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(-)-beta-Pinene, 98% 18172-67-3
2-Chloro-3-Nitropyridine, 99+% 5470-18-8
2,4,6-Tri(2-Pyridyl)-S-Triazine, 99% (titr.) 3682-35-7
1,3-Cyclohexanedione, 97% stabilized with 3% sodium chloride 504-02-9
2,4,6-Tri-Tert-Butylnitrobenzene, 99% 4074-25-3
Oxalacetic acid, 98% (titr.) 328-42-7
All-Trans-Retinol, 99%+(TLC) 68-26-8
2-Bromo-4-Chlorophenol, 99+% 695-96-5
3-Fluorobenzamide, 99% 455-37-8
2-Chloro-6-fluorotoluene, 97% 443-83-4
1-Methyl-4-(methylamino)piperidine, tech., 90% 73579-08-5
11-Aminoundecanoic Acid, 99% 2432-90-8
Cadmium iodide, 99% 7790-80-9
3-Amino-L-Tyrosine Dihydrochloride Mono- Hydrate 23279-22-3
N,N-Dipropylacetamide, 99+% (GC) 1116-24-1
Cyclododecane Epoxide, 99% (Mixture of Cis and Trans Isomers) 286-99-7
4-Methyl-2-Oxopentanoic Acid, Sodium Salt, Hydrate, 98+% 332360-07-3
Dl-isoproterenol hydrochloride, 98% 949-36-0
Rhenium, powder, 99.99% 7440-15-5
5,6-Dihydro-2,4,4,6-Tetramethyl-4H-1,3-Oxazine, Tech., 85% 26939-18-4
alpha-Naphthoflavone, 99.5+% 604-59-1
Trimethylsilyl cyanide, 98% 7677-24-9
2-Chloropyrazine,98% 14508-49-7
2-Formylbenzenesulfonic Acid, Sodium Salt, Tech. 90% 1008-72-6
4-Bromoisoquinoline, 98% 1532-97-4
Cyclopentylacetic acid, 97% 1123-00-8
Methyl diethylphosphonoacetate, 98% 1067-74-9
(4-Fluorophenyl)-(2-thienyl) ketone, 97% 579-49-7
2-Amino-6-picoline, 98% 1824-81-3
(r)-4-Isopropyl-2-oxazolidinone, 99% (99% e.e.) 95530-58-8
Pyridine hydrochloride, 98% 628-13-7
(2R)-Bornane-10,2-Sultam, 99+% (>99% e.e.) 94594-90-8
3-Dimethylamino-1-propanol, 99% 3179-63-3
2-Adamantanamine hydrochloride, 99% 10523-68-9
2-Fluorophenol, 98% 367-11-3
3-Picoline-n-oxide, 98% 1003-73-2
Aurintricarboxylic Acid, Trisodium Salt 13186-45-3
2-Piperidineethanol, 95% 1484-84-0
4-Hydroxycinnamic Acid, 98% Predominantly Trans 501-98-4
3-Hydroxytyramine Hydrochloride, 99% 62-31-7
9-Methyl-Delta-5(10)-Octaline-1,6-Dione, 99% 20007-72-1
Ruthenium red 11103-72-3
1,4-Butanediol, 99+% 110-63-4
2-(4-Chlorophenyl)malondialdehyde, 95+% (NMR) 0-00-1
Carbazole, 96% 86-74-8
Indigo, Synthetic 482-89-3
1,3,5-Benzenetricarboxylic acid, 98% 554-95-0
Nile Blue A (Cert) 2381-85-3
2,2,5,5-Tetramethyl-4-Ethyl-3-Imidazoline- - 3-Oxide-1-Oxyl, Free 66582-85-2
2-Hydroxyethyl acetate (prac) 542-59-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net