Search   
MSDS 
:
 Tetraheptylammonium Chloride, 99% (Titr.)
CAS 
:
 10247-90-2
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 10247-90-2 |Tetraheptylammonium Chloride | 99% | 233-583-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Aspiration may lead to
pulmonary edema. Can produce delayed pulmonary edema. Inhalation at
high concentrations may cause CNS depression and asphixiation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of soap and water for at
least 15 minutes while removing contaminated clothing and shoes. Wash
clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure to fresh air immediately. If breathing is
difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible Liquid.
Containers may explode when heated. Runoff from fire control or
dilution water may cause pollution.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep container tightly closed. Avoid contact with heat,
sparks and flame. Avoid ingestion and inhalation. Use with adequate
ventilation. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29CFR
1910.134 or European Standard EN 149. Always use a
NIOSH or European Standard EN 149 approved respirator
when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Appearance: clear yellow
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 175 deg C
Freezing/Melting Point: 38.00 - 40.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: 89 deg C ( 192.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C28H60ClN
Molecular Weight: 446.23

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, irritating and
toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 10247-90-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Tetraheptylammonium Chloride -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 10247-90-2: No information available.
United Kingdom Occupational Exposure Limits

Canada
CAS# 10247-90-2 is listed on Canada's DSL List.
CAS# 10247-90-2 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 10247-90-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 8/02/2000

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Buffer Solution pH 4.0 Color Coded Red 877-24-7
Zinc Iodide 10139-47-6
Buffer Solution pH 5.0 877-24-7
Zinc Dibenzyldithiocarbamate 14726-36-4
Zinc Carbonate Basic 5970-47-8
Trimethylchlorosilane 75-77-4
Manganous Cyclohexanebutyrate 35542-88-2
N-(2-Acetamido)-iminodiacetic acid (ADA) 26239-55-4
Acrylomix 5 79-06-1
Manganese chloride 1.0M solution 7732-18-5
Tri-N-Octylamine 1116-76-3
Almond Oil
Antimony atomic absorption standard solution, 1mg/ml Sb in 20% HCl 7647-01-0
Allyl Thiourea 109-57-9
Dimethyl methoxymalonate, 99% 5018-30-4
Trans-1,2-Cyclohexanedicarboxylic Acid 95%, Remainder Cis 2305-32-0
Triphenylamine 603-34-9
N-Trimethylsilylimidazole 18156-74-6
Aluminium lithium hydride 16853-85-3
Sulfuryl chloride fluoride, distilled, 99% 13637-84-8
2,4,6-Trinitrobenzene Sulfonic Acid 2508-19-2
Xylitol 87-99-0
Aluminium Oxide 1344-28-1
Aluminium Tri-Isopropoxide 555-31-7
Triphenyl Phosphite 101-02-0
Aluminum sulfate (n-hydrated) 10043-01-3
4-Aminobenzoic Acid 150-13-0
3-Aminomethylalizarin-NN-Diacetic Acid 3952-78-1
2-Amino-2-methylpropan-1-ol 124-68-5
Trimethylamine Solution 75-50-3
4-Cyano-2,2,5,5-Tetramethyl-3-Imidazoline- 3-Oxide-1-Oxyl, 98%, Free 64918-63-4
Triphenylphosphate 115-86-6
DL-2-Bromopropionic acid, 99+% 598-72-1
Triphenylmethane 519-73-3
1-Amino-2-Naphthol-4-Sulfonic Acid 116-63-2
2,6-Diisopropylnaphthalene, 99% 24157-81-1
DL-Tryptophan 54-12-6
2-Aminophenol 95-55-6
Urease Active Meal 0-01-1
Ceresin Wax 8001-75-0
Methyl Chloroacetate, 99+% 96-34-4
Benzyldimethylhexadecylammonium chloride, hydrate, 97-101% 122-18-9
3-Hydroxybutyric Acid, Tech. 300-85-6
4-Aminophenol 123-30-8
Tetraheptylammonium Chloride, 99% (Titr.) 10247-90-2
Lanette Wax
3-Aminophthalhydrazide 521-31-3
Dodeca-tungstosilicic Acid 12027-38-2
Ammonia Anhydrous Liquified 7664-41-7
Dodeca-Tungstophophoric Acid 12067-99-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net