Search   
MSDS 
:
 DL-2-Bromopropionic acid, 99+%
CAS 
:
 598-72-1
SYNONYMS 
:
 2-Bromopropanoic acid.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 598-72-1 |DL-2-Bromopropionic acid | >99 | 209-947-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Harmful if absorbed through the skin. Causes skin burns.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns. May cause
central nervous system effects.
Inhalation:
Harmful if inhaled. Causes chemical burns to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation. This is a low melting point solid and may exist in the
liquid or solid state depending on temperature.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Do not breathe dust, vapor, mist, or
gas. Do not get in eyes, on skin, or on clothing. Keep container
tightly closed. Discard contaminated shoes.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 598-72-1:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles and face shield.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid or liquid
Color: after melting, clear colorless - yellow
Odor: pungent odor
pH: Not available.
Vapor Pressure: 0.1 mm Hg @ 25 deg
Viscosity: Not available.
Boiling Point: 203 deg C @ 760 mm Hg
Freezing/Melting Point: 25 deg C
Autoignition Temperature: Not available.
Flash Point: 100 deg C ( 212.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density: 1.6500g/cm3
Molecular Formula: CH3CH(Br)CO2H
Molecular Weight: 152.98

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Light, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 598-72-1: UA2451715
LD50/LC50:
Not available.
Toxicity data for similar chemical, 2-bromobutyric acid, CAS
80-58-0:
mg/kg
signs)
signs)
testing by Eastman Kodak)
Carcinogenicity:
DL-2-Bromopropionic acid -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3261
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 598-72-1: No information available.
Canada
CAS# 598-72-1 is listed on Canada's NDSL List.
CAS# 598-72-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 598-72-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/18/2000 Revision #5 Date: 5/03/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Buffer Solution pH 4.0 Color Coded Red 877-24-7
Zinc Iodide 10139-47-6
Buffer Solution pH 5.0 877-24-7
Zinc Dibenzyldithiocarbamate 14726-36-4
Zinc Carbonate Basic 5970-47-8
Trimethylchlorosilane 75-77-4
Manganous Cyclohexanebutyrate 35542-88-2
N-(2-Acetamido)-iminodiacetic acid (ADA) 26239-55-4
Acrylomix 5 79-06-1
Manganese chloride 1.0M solution 7732-18-5
Tri-N-Octylamine 1116-76-3
Almond Oil
Antimony atomic absorption standard solution, 1mg/ml Sb in 20% HCl 7647-01-0
Allyl Thiourea 109-57-9
Dimethyl methoxymalonate, 99% 5018-30-4
Trans-1,2-Cyclohexanedicarboxylic Acid 95%, Remainder Cis 2305-32-0
Triphenylamine 603-34-9
N-Trimethylsilylimidazole 18156-74-6
Aluminium lithium hydride 16853-85-3
Sulfuryl chloride fluoride, distilled, 99% 13637-84-8
2,4,6-Trinitrobenzene Sulfonic Acid 2508-19-2
Xylitol 87-99-0
Aluminium Oxide 1344-28-1
Aluminium Tri-Isopropoxide 555-31-7
Triphenyl Phosphite 101-02-0
Aluminum sulfate (n-hydrated) 10043-01-3
4-Aminobenzoic Acid 150-13-0
3-Aminomethylalizarin-NN-Diacetic Acid 3952-78-1
2-Amino-2-methylpropan-1-ol 124-68-5
Trimethylamine Solution 75-50-3
4-Cyano-2,2,5,5-Tetramethyl-3-Imidazoline- 3-Oxide-1-Oxyl, 98%, Free 64918-63-4
Triphenylphosphate 115-86-6
DL-2-Bromopropionic acid, 99+% 598-72-1
Triphenylmethane 519-73-3
1-Amino-2-Naphthol-4-Sulfonic Acid 116-63-2
2,6-Diisopropylnaphthalene, 99% 24157-81-1
DL-Tryptophan 54-12-6
2-Aminophenol 95-55-6
Urease Active Meal 0-01-1
Ceresin Wax 8001-75-0
Methyl Chloroacetate, 99+% 96-34-4
Benzyldimethylhexadecylammonium chloride, hydrate, 97-101% 122-18-9
3-Hydroxybutyric Acid, Tech. 300-85-6
4-Aminophenol 123-30-8
Tetraheptylammonium Chloride, 99% (Titr.) 10247-90-2
Lanette Wax
3-Aminophthalhydrazide 521-31-3
Dodeca-tungstosilicic Acid 12027-38-2
Ammonia Anhydrous Liquified 7664-41-7
Dodeca-Tungstophophoric Acid 12067-99-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net