Search   
MSDS 
:
 1-Phenyl-2-thiourea
CAS 
:
 103-85-5
SYNONYMS 
:
 Phenylthiocarbamide; Phenylthiourea; PTU.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 103-85-5 |1-phenyl-2-thiourea | 97.0 | 203-151-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T+
Risk Phrases: 26/27/28 39

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Very toxic by inhalation, in contact with skin and if swallowed.
Danger of very serious irreversible effects.Highly toxic.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May be fatal if swallowed. May cause irritation of the digestive
tract. Poison by ingestion.
Inhalation:
May cause respiratory tract irritation.
Chronic:
May cause bone marrow abnormalities with damage to blood forming
tissues.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately. SPEED IS ESSENTIAL. A DOCTOR MUST BE NOTIFIED AT
ONCE. Induce vomiting only when instructed to do so by a physician.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Water or foam may cause frothing. Use water spray, dry chemical,
carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Avoid
generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Remove
contaminated clothing and wash before reuse. Use only in a
well-ventilated area. Minimize dust generation and accumulation. Use
spark-proof tools and explosion proof equipment. Do not breathe dust,
vapor, mist, or gas. Do not get in eyes, on skin, or on clothing.
Keep container tightly closed. Do not ingest or inhale. Discard
contaminated shoes.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Poison room locked.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 103-85-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white to off-white
Odor: Odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 153.00 - 155.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.3000g/cm3
Molecular Formula: C7H8N2S
Molecular Weight: 152.22

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable.
Conditions to Avoid:
Temperatures above recommended temperatures, dust generation.
Incompatibilities with Other Materials:
Strong acids, strong bases, acids, acid fumes, strong oxidizing
agents
Hazardous Decomposition Products:
Nitrogen oxides, sulfur dioxide, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 103-85-5: YU1400000
LD50/LC50:
CAS# 103-85-5: Oral, mouse: LD50 = 10 mg/kg; Oral, rabbit: LD50 = 40
mg/kg; Oral, rat: LD50 = 3 mg/kg.
Carcinogenicity:
1-phenyl-2-thiourea -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
USA RQ: CAS# 103-85-5: 100 lb final RQ; 45.4 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T+
Risk Phrases:
R 26/27/28 Very toxic by inhalation, in contact with
skin and if swallowed.
R 39 Danger of very serious irreversible effects.
Safety Phrases:
S 1 Keep locked up.
S 13 Keep away from food, drink and animal feeding
stuffs.
S 23 Do not inhale gas/fumes/vapour/spray.
S 24/25 Avoid contact with skin and eyes.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 103-85-5: No information available.
Canada
CAS# 103-85-5 is listed on Canada's DSL List.
CAS# 103-85-5 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 103-85-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/15/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
N,n'-disuccinimidyl carbonate, 98% 74124-79-1
2,6-Dimethylthiophenol, 96% 118-72-9
1-Phenyl-2-thiourea 103-85-5
N-Acetyl-S-(2-Cyanoethyl)-L-Cysteine 74514-75-3
2-Bromobenzonitrile, 99% 2042-37-7
Ammonium-D4 Chloride, 98+ Atom % D 12015-14-4
(2,2-Dichloro-1-methylcyclopropyl)benzene, 95% 3591-42-2
4-Bromo-2-Fluorobenzylamine Hydrochloride 99% (Titr.) 147181-08-6
1-Isobutoxycarbonyl-2-isobutoxy-1,2-dihydroquinone, 97% 38428-14-7
Levulinic acid, 98+% 123-76-2
Sodium bismuthate(V) 1304-76-3
4-Fluorobenzonitrile, 99% 1194-02-1
Phenylacetic Acid Hydrazide, 99% 937-39-3
4-Amino-2-Mercaptopyrimidine, 97% 333-49-3
3,5-Dimethoxybenzyl Alcohol, 98% 705-76-0
2,2'-Biphenol, 99% 1806-29-7
2-Methyl-2-nitrosopropane dimer 98% 6841-96-9
3-[2-(2-Iodoacetamido)acetamido]-PROXYL, free radical 74648-17-2
Diethyl 2-ethyl-2-(p-tolyl)malonate, 99% 68692-80-8
3,5-bis(trifluoromethyl)aniline, 98+% 328-74-5
Ethyl 3-Chloropropionate, 99% (GC) 623-71-2
Benzo[a]pyrene, 98% 50-32-8
(-)-Camphene, 95% 5794-04-7
4-(Dimethylamino)-Benzophenone 98% 529-84-0
Cyclohexylacetic Acid, 99% 5292-21-7
Tetracosane, 99% 646-31-1
4-Benzyloxyaniline Hydrochloride, 98% 51388-20-6
Chloromethyl Butyrate, 99% 33657-49-7
4-Aminosulfonyl-1-Hydroxy-2-Naphthoic Acid, 97% 64415-15-2
N,N-Diethylethylenediamine, 98+% 100-36-7
Xenon difluoride, 99.5% 13709-36-9
Tungsten Disulfide, 99%,Particle Size 0.7- 1.1 Micrometer 12138-09-9
n-Benzylethylenediamine 99% (titr.) 4152-09-4
2,4-Dimethylbenzoic acid, 98% 611-01-8
L-10-Camphorsulfonic Acid Ammonium Salt 13867-85-1
Meso-Tetraphenylporphine, Chlorin free 20998-75-8
n-Propylcyclopropane methylamine hydrochloride, 99% 26389-60-6
1-Octanesulfonic Acid Sodium Salt Premixed Concentrate (Low UV) 5324-84-5
2-Benzimidazolylurea, 97% 24370-25-0
2-Fluoro-6-Nitrotoluene, 98% 769-10-8
2,8-Bis(dimethylamino)-10-dodecyl-acridinium bromide 41387-42-2
Isopentyl Ether, 98% (GC) 544-01-4
Ethyl Methyl Sulfide, 98% (GC) 624-89-5
1,4,8,11-Tetraazacyclotetradecane, 99+% 295-37-4
DL-P-Chlorophenylalanine, 98% 7424-00-2
1-Adamantyl Bromomethyl Ketone, 98% 5122-82-7
4-Amino-2-nitrophenol, 99% 119-34-6
2,4-Dinitroanisole 119-27-7
Rhodamine B Base 509-34-2
Glycol sulfite, 98% 3741-38-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net