**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1069-08-5 |Diethylphosphoramidous dichloride | 97% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 14 34 5
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Reacts violently with water. Causes burns. Heating may cause an
explosion.Corrosive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. Causes chemical burns to the respiratory tract.
Inhalation may be fatal as a result of spasm, inflammation, edema of
the larynx and bronchi, chemical pneumonitis and pulmonary edema.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Exposure to heat may promote violent decomposition.
During a fire, irritating and highly toxic gases may be generated by
thermal decomposition or combustion. Will burn if involved in a
fire. Water Reactive. Material will react with water and may release
a flammable and/or toxic gas. Use water spray to keep fire-exposed
containers cool. Combustible liquid. Vapors may be heavier than air.
They can spread along the ground and collect in low or confined
areas. May ignite or explode on contact with steam or moist air.
Containers may explode when heated.
Extinguishing Media:
Use dry sand or earth to smother fire. Use water spray to cool
fire-exposed containers. Use foam, dry chemical, or carbon dioxide.
DO NOT USE WATER! Contact professional fire-fighters immediately.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation. Do not expose spill to
water.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Do not allow water to get into the container because of violent
reaction. Do not breathe dust, vapor, mist, or gas. Do not get in
eyes, on skin, or on clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep away from
heat, sparks and flame. Do not ingest or inhale. Do not allow
contact with water. Use only in a chemical fume hood. Store and
handle protected from air. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames. Keep from contact with moist air and steam.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Keep under a
nitrogen blanket. Store in a cool, dry, well-ventilated area away
from incompatible substances. Keep away from water. Corrosives area.
Keep refrigerated. (Store below 4C/39F.)
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use explosion-proof ventilation equipment. Facilities storing or
utilizing this material should be equipped with an eyewash facility
and a safety shower. Use adequate ventilation to keep airborne
concentrations low.
Exposure Limits
CAS# 1069-08-5:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: pale-yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 179 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 82 deg C ( 179.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.1960g/cm3
Molecular Formula: C4H10Cl2NP
Molecular Weight: 174.01
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Combines vigorously or explosively with water.
Conditions to Avoid:
High temperatures, incompatible materials, ignition sources, contact
with water, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Acids, alcohols, amines, strong bases, strong oxidizing agents,
strong reducing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, phosphine, carbon monoxide,
oxides of phosphorus, carbon dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 1069-08-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Diethylphosphoramidous dichloride -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 14 Reacts violently with water.
R 34 Causes burns.
R 5 Heating may cause an explosion.
Safety Phrases:
S 3/9/49 Keep only in the original container in a
cool, well-ventilated place.
S 36/39 Wear suitable protective clothing and
eye/face protection.
WGK (Water Danger/Protection)
CAS# 1069-08-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1069-08-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1069-08-5 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 3/04/1999 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
3-Penten-2-Ol, 96%, Predominatly Trans
| 1569-50-2 |
|
4-Fluoro-3-Nitrobenzoic Acid, 98%
| 453-71-4 |
|
Thymoquinone, 99%
| 490-79-9 |
|
1-Methallyl-3-Methyl-2-Thiourea, 98%
| 21018-38-2 |
|
3,4-Diethoxy-3-Cyclobutene-1,2-Dione, 98%
| 5231-87-8 |
|
4-Propoxybenzoic Acid, 98%
| 5438-19-7 |
|
N-METHYLPHTHALIMIDE, 98%
| 550-44-7 |
|
2,3-Dimethylhydroquinone, 99%
| 608-43-5 |
|
N-(2-Carboxyphenyl)glycine, 97%
| 612-42-0 |
|
3,3,5-Trimethylhexahydroazepine, 98%, mixture of isomers
| 35466-89-8 |
|
Triphosgene, 99% (Titr.)
| 32315-10-9 |
|
2,2-Dichloropropionic Acid, Tech., 90%
| 75-99-0 |
|
2-Phenylbenzoxazole, 99%
| 833-50-1 |
|
5-Chloro-1-Methylimidazole, 98%
| 872-49-1 |
|
2-Allylcyclohexanone, 97%
| 94-66-6 |
|
1,2-bis(dimethylphosphino)ethane, 97%
| 23936-60-9 |
|
Trans-1,2-Bis(Diphenylphosphino)Ethylene, 97%
| 983-81-3 |
|
1,3-Bis(Diphenylphosphino)Propane, 97%
| 6737-42-4 |
|
Bis(2-Oxo-3-Oxazolidinyl)phosphinic Chloride, 97%
| 68641-49-6 |
|
o-(tert-Butyldimethylsilyl)hydroxylamine, 95%
| 41879-39-4 |
|
Diethylphenylphosphine, 98%
| 1605-53-4 |
|
Diethylphosphoramidous Dichloride, 97%
| 1069-08-5 |
|
Dimethylphenylphosphine, 97%
| 672-66-2 |
|
Terbium(iii,iv)-oxide, 99.999%
| 12037-01-3 |
|
Dimethylphosphinic Acid, 97%
| 3283-12-3 |
|
Diphenylphosphine Oxide, 97%
| 4559-70-0 |
|
Diethyl (2-Chloroethyl)phosphonate, 95%
| 10419-79-1 |
|
Tributylgermane, 99%
| 998-39-0 |
|
Methylphosphonic dichloride, 98%
| 676-97-1 |
|
Propylphosphonic acid, 95%
| 4672-38-2 |
|
DIPHENYL(TRIMETHYLSILYL)PHOSPHINE, TECH.
| 17154-34-6 |
|
Sodium Sulfide
| 1313-82-2 |
|
Germanium(iv)ethoxide, 99.95+%
| 14165-55-0 |
|
Dimethyl(4r,5r)-1,3,2-dioxathiolane-4,5- dicarboxylate 2,2-dioxide,
| 117470-90-3 |
|
(s)-(+)-Phenylglycinol, 98%
| 20989-17-7 |
|
(1s,2s)-(+)-1,2-Diaminocyclohexane, 98%
| 21436-03-3 |
|
1- Phenylisatin
| 723-89-7 |
|
(+)-Menthoxyacetic Acid, 98%
| 94133-41-2 |
|
Trans-Chrysanthemyl Alcohol,98%, Mixture of ca. 10% Cis and ca.90%
| 5617-92-5 |
|
Neocyanine, 99% (UV-VIS)
| 4846-34-8 |
|
2-Isopropoxyphenol, 97%
| 4812-20-8 |
|
4,6-Dihydroxy-5-Nitropyrimidine, 95%
| 2164-83-2 |
|
Dehydrocholic acid, 98%
| 81-23-2 |
|
2-Thiophenecarboxamide, 99%
| 5813-89-8 |
|
Lactobionic acid, 97%
| 96-82-2 |
|
4,4'-Diacetylbiphenyl, 98%
| 787-69-9 |
|
4-Hexylaniline, Tech., 90%
| 33228-45-4 |
|
2-Bromo-4'-Nitroacetophenone, Tech., 83% (GC)
| 99-81-0 |
|
Vinblastine sulfate, 96.0-102.0% (hplc)
| 143-67-9 |
|
2,3-Dimethyl-6-Nitroaniline, 97%
| 59146-96-2 |
|
|