Search   
MSDS 
:
 n-Methylethylenediamine, 95%
CAS 
:
 109-81-9
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 109-81-9 |N-Methylethylenediamine | 95.0 | 203-707-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F C
Risk Phrases: 10 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Causes burns.The toxicological properties of this
material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe gastrointestinal tract irritation with nausea,
vomiting and possible burns. The toxicological properties of this
substance have not been fully investigated.
Inhalation:
May cause severe irritation of the upper respiratory tract with
pain, burns, and inflammation. The toxicological properties of this
substance have not been fully investigated. Vapors may cause
dizziness or suffocation.
Chronic:
None

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
Containers can build up pressure if exposed to heat and/or fire. As
in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Flammable
liquid and vapor.
Extinguishing Media:
For small fires, use water spray, dry chemical, carbon dioxide or
chemical foam. Use water spray to cool fire-exposed containers. Do
NOT get water inside containers. For large fires, use water spray,
fog or alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Ground and
bond containers when transferring material. Do not get in eyes, on
skin, or on clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Do not ingest or
inhale. Do not pressurize, cut, weld, braze, solder, drill, grind, or
expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 109-81-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear very slight yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 115 deg C @ 760.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 41 deg C ( 105.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .8410g/cm3
Molecular Formula: C3H10N2
Molecular Weight: 74.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stability unknown.
Conditions to Avoid:
Incompatible materials, ignition sources.
Incompatibilities with Other Materials:
Strong acids - acid chlorides - acid anhydrides - strong oxidizing
agents - carbon dioxide.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 109-81-9: KV5250500
LD50/LC50:
Not available.
Carcinogenicity:
N-Methylethylenediamine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S.*
Hazard Class: 8 (3)
UN Number: 2734
Packing Group: II
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S.
Hazard Class: 8 (3)
UN Number: 2734
Packing Group: II
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S.
Hazard Class: 8
UN Number: 2734
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C
Risk Phrases:
R 10 Flammable.
R 34 Causes burns.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 109-81-9: No information available.
Canada
CAS# 109-81-9 is listed on Canada's DSL List.
CAS# 109-81-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 109-81-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Triphenylmethane, 99+% (GC) 519-73-3
cis-1-Bromo-2-ethoxyethylene, 95% 23521-49-5
p-Hexylbenzaldehyde diethyl acetal, 99%
4-Hexyloxybenzaldehyde, 99% 5736-94-7
3-(4-methoxybenzoyl)propionic acid, 97% 3153-44-4
2,5-Bis-(4-Pyridyl)-1,3,4-Thiadiazole, 95% 15311-09-8
Silver tetrafluoroborate, 99% 14104-20-2
DL-2-Bromohexanoic acid, 97% 616-05-7
Cytidine 5'-Triphosphate, Disodium Salt Dihydrate 81012-87-5
Poly(acrylic acid), 63 wt.% aqueous solution 7732-18-5
Ethyl DL-2-Hydroxycaproate, 97% 6946-90-3
4-Nitrophenyl-2-acetamido-2-deoxy-alpha-d- glucopyranoside, 99% 10139-02-3
4-Nitroquinoline-n-oxide, 98% 56-57-5
2-Aminoanthracene, Tech., 92% (HPLC) 613-13-8
2,3-Dimethyl-1-(4-methylphenyl)-3- pyrazolin-5-one, 99+% 56430-08-1
n-Methylethylenediamine, 95% 109-81-9
2,2-Dimethyl-5-(2-Hexahydroazepinylidene)-1,3-Dioxan-4,6-Dione, 99+% 70912-54-8
Thiophosphoryl Chloride, 98% 3982-91-0
1,2,3,6-Tetrahydrobenzaldehyde, 99% 100-50-5
6-Aminoindazole, 97+% 6967-12-0
N-Cyclohexylformamide, 99% 766-93-8
Quinhydrone, 98% 106-34-3
4-Bromobenzophenone, 97% 90-90-4
d-alpha-Tocopheryl polyethylene glycol 1000 succinate 9002-96-4
Direct Yellow 27 10190-68-8
3,4,5-Trimethoxybenzaldehyde, 99% 86-81-7
2-Chloroethyl Ethyl Ether, 98+% 628-34-2
Isobutyraldehyde, 99+% (GC) 78-84-2
Potassium nitrosodisulfonate 14293-70-0
4-Amino-3-Methylbenzoic Acid, 98% 2486-70-6
3,4-Diaminobenzoic acid, 97% 619-05-6
3,5-Dichloroaniline, 98% 626-43-7
3'-Bromo-4'-Fluoropropiophenone, 98% 0-00-1
D-(+)-2-Amino-3-Phenyl-1-Propanol, 98% 5267-64-1
2-Furoic Acid, 98% 88-14-2
Diphenyl n-cyanocarbonimidate, 97% 79463-77-7
Sulfamethazine, 99% 57-68-1
L-Histidinol Dihydrochloride, 99% 1596-64-1
Vanadium atomic absorption standard solution, 1 mg/ml V in 2% HNO3 7440-62-2
Crotonaldehyde, 99+% 4170-30-3
1,6-Dicyanohexane, 99% 629-40-3
Azidotrimethylsilane, 97% 4648-54-8
2-Ethyl-3-methylbutanal, 97% 26239-55-4
1,2,4-Benzenetriol, 99% 533-73-3
Gold Atomic Absorption Standard Solution 1 mg/ml Au in 0.5N HCl 7440-57-5
Dimethyl Terephthalate , 99% 120-61-6
Ethylenediaminetetraacetic Acid, Tripotassium Salt (Pract), 90% 7732-18-5
2,2-Diethyl-1,3-Propanediol, 99+% 115-76-4
2'-Deoxyadenosine Hydrate, 99% 16373-93-6
DL-(2-Fluorophenyl)-Alanine, 99% 2629-55-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net