Search   
MSDS 
:
 Silver tetrafluoroborate, 99%
CAS 
:
 14104-20-2
SYNONYMS 
:
 Silver fluoborate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 14104-20-2 |Silver tetrafluoroborate | 99.0 | 237-956-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.Hygroscopic (absorbs moisture from the
air).Light sensitive.

Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe gastrointestinal tract irritation with nausea,
vomiting and possible burns.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Discard contaminated clothing in a manner which limits
further exposure.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Do not get in eyes, on
skin, or on clothing. Keep container tightly closed. Avoid ingestion
and inhalation. Store protected from light.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area. Keep away from acids.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 14104-20-2:

Japan: (listed as silver compounds): 0.01 mg/m3 OEL (as Ag)

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: beige
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density:
Molecular Formula: AgBF4
Molecular Weight: 194.67

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable.
Conditions to Avoid:
Light, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Boron trifluoride, hydrogen fluoride gas.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 14104-20-2: ED2875000
LD50/LC50:
Not available.
Carcinogenicity:
Silver tetrafluoroborate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 14104-20-2: No information available.
Canada
CAS# 14104-20-2 is listed on Canada's NDSL List.
CAS# 14104-20-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 14104-20-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/24/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Triphenylmethane, 99+% (GC) 519-73-3
cis-1-Bromo-2-ethoxyethylene, 95% 23521-49-5
p-Hexylbenzaldehyde diethyl acetal, 99%
4-Hexyloxybenzaldehyde, 99% 5736-94-7
3-(4-methoxybenzoyl)propionic acid, 97% 3153-44-4
2,5-Bis-(4-Pyridyl)-1,3,4-Thiadiazole, 95% 15311-09-8
Silver tetrafluoroborate, 99% 14104-20-2
DL-2-Bromohexanoic acid, 97% 616-05-7
Cytidine 5'-Triphosphate, Disodium Salt Dihydrate 81012-87-5
Poly(acrylic acid), 63 wt.% aqueous solution 7732-18-5
Ethyl DL-2-Hydroxycaproate, 97% 6946-90-3
4-Nitrophenyl-2-acetamido-2-deoxy-alpha-d- glucopyranoside, 99% 10139-02-3
4-Nitroquinoline-n-oxide, 98% 56-57-5
2-Aminoanthracene, Tech., 92% (HPLC) 613-13-8
2,3-Dimethyl-1-(4-methylphenyl)-3- pyrazolin-5-one, 99+% 56430-08-1
n-Methylethylenediamine, 95% 109-81-9
2,2-Dimethyl-5-(2-Hexahydroazepinylidene)-1,3-Dioxan-4,6-Dione, 99+% 70912-54-8
Thiophosphoryl Chloride, 98% 3982-91-0
1,2,3,6-Tetrahydrobenzaldehyde, 99% 100-50-5
6-Aminoindazole, 97+% 6967-12-0
N-Cyclohexylformamide, 99% 766-93-8
Quinhydrone, 98% 106-34-3
4-Bromobenzophenone, 97% 90-90-4
d-alpha-Tocopheryl polyethylene glycol 1000 succinate 9002-96-4
Direct Yellow 27 10190-68-8
3,4,5-Trimethoxybenzaldehyde, 99% 86-81-7
2-Chloroethyl Ethyl Ether, 98+% 628-34-2
Isobutyraldehyde, 99+% (GC) 78-84-2
Potassium nitrosodisulfonate 14293-70-0
4-Amino-3-Methylbenzoic Acid, 98% 2486-70-6
3,4-Diaminobenzoic acid, 97% 619-05-6
3,5-Dichloroaniline, 98% 626-43-7
3'-Bromo-4'-Fluoropropiophenone, 98% 0-00-1
D-(+)-2-Amino-3-Phenyl-1-Propanol, 98% 5267-64-1
2-Furoic Acid, 98% 88-14-2
Diphenyl n-cyanocarbonimidate, 97% 79463-77-7
Sulfamethazine, 99% 57-68-1
L-Histidinol Dihydrochloride, 99% 1596-64-1
Vanadium atomic absorption standard solution, 1 mg/ml V in 2% HNO3 7440-62-2
Crotonaldehyde, 99+% 4170-30-3
1,6-Dicyanohexane, 99% 629-40-3
Azidotrimethylsilane, 97% 4648-54-8
2-Ethyl-3-methylbutanal, 97% 26239-55-4
1,2,4-Benzenetriol, 99% 533-73-3
Gold Atomic Absorption Standard Solution 1 mg/ml Au in 0.5N HCl 7440-57-5
Dimethyl Terephthalate , 99% 120-61-6
Ethylenediaminetetraacetic Acid, Tripotassium Salt (Pract), 90% 7732-18-5
2,2-Diethyl-1,3-Propanediol, 99+% 115-76-4
2'-Deoxyadenosine Hydrate, 99% 16373-93-6
DL-(2-Fluorophenyl)-Alanine, 99% 2629-55-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net