Search   
MSDS 
:
 2-Chloroethyl Ethyl Ether, 98+%
CAS 
:
 628-34-2
SYNONYMS 
:
 2-Ethoxyethylchloride
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 628-34-2 |2-Chloroethyl Ethyl Ether | >98 | 211-037-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI F
Risk Phrases: 11 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Irritating to eyes, respiratory system and
skin.Highly flammable.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Vapors may cause dizziness or
suffocation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Use water spray to keep fire-exposed
containers cool. Water may be ineffective. Material is lighter than
water and a fire may be spread by the use of water. Flammable liquid
and vapor. Vapors may be heavier than air. They can spread along
the ground and collect in low or confined areas. Will be easily
ignited by heat, sparks or flame. Containers may explode if exposed
to fire.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. Water may be ineffective. Water may spread
fire. If water is the only media available, use in flooding amounts.
For large fires, use water spray, fog or alcohol-resistant foam. Do
NOT use straight streams of water. Cool containers with flooding
quantities of water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Scoop up
with a nonsparking tool, then place into a suitable container for
disposal. Remove all sources of ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Ground and bond containers when transferring material. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Use with adequate ventilation. Wash
clothing before reuse. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose empty containers to heat, sparks or open
flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from heat and
flame. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 628-34-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 107 deg C @ 760.00mm Hg
Freezing/Melting Point: -60 deg C
Autoignition Temperature: 190 deg C ( 374.00 deg F)
Flash Point: 15 deg C ( 59.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: miscible in water
Specific Gravity/Density: .9890g/cm3
Molecular Formula: C4H9ClO
Molecular Weight: 108.57

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 628-34-2: KN6250000
LD50/LC50:
CAS# 628-34-2: Inhalation, mouse: LC50 = 2500 ng/m3/2H; Inhalation,
mouse: LC50 = 2500 mg/m3/2H.
Carcinogenicity:
2-Chloroethyl Ethyl Ether -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.2
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI F
Risk Phrases:
R 11 Highly flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
WGK (Water Danger/Protection)
CAS# 628-34-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 628-34-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 628-34-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/11/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Triphenylmethane, 99+% (GC) 519-73-3
cis-1-Bromo-2-ethoxyethylene, 95% 23521-49-5
p-Hexylbenzaldehyde diethyl acetal, 99%
4-Hexyloxybenzaldehyde, 99% 5736-94-7
3-(4-methoxybenzoyl)propionic acid, 97% 3153-44-4
2,5-Bis-(4-Pyridyl)-1,3,4-Thiadiazole, 95% 15311-09-8
Silver tetrafluoroborate, 99% 14104-20-2
DL-2-Bromohexanoic acid, 97% 616-05-7
Cytidine 5'-Triphosphate, Disodium Salt Dihydrate 81012-87-5
Poly(acrylic acid), 63 wt.% aqueous solution 7732-18-5
Ethyl DL-2-Hydroxycaproate, 97% 6946-90-3
4-Nitrophenyl-2-acetamido-2-deoxy-alpha-d- glucopyranoside, 99% 10139-02-3
4-Nitroquinoline-n-oxide, 98% 56-57-5
2-Aminoanthracene, Tech., 92% (HPLC) 613-13-8
2,3-Dimethyl-1-(4-methylphenyl)-3- pyrazolin-5-one, 99+% 56430-08-1
n-Methylethylenediamine, 95% 109-81-9
2,2-Dimethyl-5-(2-Hexahydroazepinylidene)-1,3-Dioxan-4,6-Dione, 99+% 70912-54-8
Thiophosphoryl Chloride, 98% 3982-91-0
1,2,3,6-Tetrahydrobenzaldehyde, 99% 100-50-5
6-Aminoindazole, 97+% 6967-12-0
N-Cyclohexylformamide, 99% 766-93-8
Quinhydrone, 98% 106-34-3
4-Bromobenzophenone, 97% 90-90-4
d-alpha-Tocopheryl polyethylene glycol 1000 succinate 9002-96-4
Direct Yellow 27 10190-68-8
3,4,5-Trimethoxybenzaldehyde, 99% 86-81-7
2-Chloroethyl Ethyl Ether, 98+% 628-34-2
Isobutyraldehyde, 99+% (GC) 78-84-2
Potassium nitrosodisulfonate 14293-70-0
4-Amino-3-Methylbenzoic Acid, 98% 2486-70-6
3,4-Diaminobenzoic acid, 97% 619-05-6
3,5-Dichloroaniline, 98% 626-43-7
3'-Bromo-4'-Fluoropropiophenone, 98% 0-00-1
D-(+)-2-Amino-3-Phenyl-1-Propanol, 98% 5267-64-1
2-Furoic Acid, 98% 88-14-2
Diphenyl n-cyanocarbonimidate, 97% 79463-77-7
Sulfamethazine, 99% 57-68-1
L-Histidinol Dihydrochloride, 99% 1596-64-1
Vanadium atomic absorption standard solution, 1 mg/ml V in 2% HNO3 7440-62-2
Crotonaldehyde, 99+% 4170-30-3
1,6-Dicyanohexane, 99% 629-40-3
Azidotrimethylsilane, 97% 4648-54-8
2-Ethyl-3-methylbutanal, 97% 26239-55-4
1,2,4-Benzenetriol, 99% 533-73-3
Gold Atomic Absorption Standard Solution 1 mg/ml Au in 0.5N HCl 7440-57-5
Dimethyl Terephthalate , 99% 120-61-6
Ethylenediaminetetraacetic Acid, Tripotassium Salt (Pract), 90% 7732-18-5
2,2-Diethyl-1,3-Propanediol, 99+% 115-76-4
2'-Deoxyadenosine Hydrate, 99% 16373-93-6
DL-(2-Fluorophenyl)-Alanine, 99% 2629-55-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net