Search   
MSDS 
:
 Isopropyl Myristate, 96% (GC)
CAS 
:
 110-27-0
SYNONYMS 
:
 1-Tridecanecarboxylic Acid, Isopropyl Ester; Isopropyl     Tetradecanoate;
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 110-27-0 |Isopropyl Myristate | 96% | 203-751-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to skin.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation. Can produce delayed
pulmonary edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas. Runoff
from fire control or dilution water may cause pollution.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Avoid ingestion and inhalation. Use with
adequate ventilation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 110-27-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 167 deg C @ 9.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .8530g/cm3
Molecular Formula: C17H34O2
Molecular Weight: 270.45

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 110-27-0: XB8600000
LD50/LC50:
CAS# 110-27-0: Draize test, rabbit, skin: 426 mg/24H Mild; Draize
test, rabbit, skin: 100 mg/24H Severe; Oral, mouse: LD50 = 49700
mg/kg; Skin, rabbit: LD50 = 5 gm/kg.
Carcinogenicity:
Isopropyl Myristate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 38 Irritating to skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 110-27-0: 0
Canada
CAS# 110-27-0 is listed on Canada's DSL List.
CAS# 110-27-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 110-27-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Phenylhydrazium Chloride 59-38-1
Magnesium nitrate 10377-60-3
Phenyl Mercury Acetate 62-38-4
Phenyl Mercury Chloride 100-56-1
Magnesium Sulfate, Hydrated 10034-99-8
Phenylmethylsulfonyl Fluoride 329-98-6
Phenylthiourea 103-85-5
Malachite Green (Oxalate) Certified 2437-29-8
Iso-Phorone 78-59-1
Maltose 69-79-4
Isopropyl Myristate, 96% (GC) 110-27-0
Phosgene solution in toluene 75-44-5
DL-Mandelic acid 90-64-2
Phosphorus Red Amorphous 7723-14-0
Manganese metal 7439-96-5
Phosphorus, White Sticks 7723-14-0
Polyvinyl Pyrrolidone 9003-39-8
o-Tolylhydrazine hydrochloride, 98% 635-26-7
5-Hydroxyindole, 97% 1953-54-4
Manganese (II) Acetate Tetrahydrate 6156-78-1
Phosphorus Pentasulfide 1314-80-3
Phosphorus Tribromide 7789-60-8
Phosphorus Trichloride 7719-12-2
N,N-Diethyl-m-toluamide, 95% 134-62-3
Phthalic Acid 88-99-3
Magnesium Chloride Solution 7732-18-5
Chloromethyl Methyl Sulfide, 95% 2373-51-5
Manganese(II) sulfate, tetrahydrate 7785-87-7
Manganese(II) sulfate, dried powder 7785-87-7
D- (+)- Mannose 3458-28-4
Marble Chips 471-34-1
Phthalic Anhydride 85-44-9
Phthalimide 85-41-6
Picrolonic Acid 550-74-3
Picric Acid, Moistened with 40.0% Water 88-89-1
Pinacol 76-09-5
Piperazine Hydrate 142-63-2
Piperazine-N,N bis(2-ethane sulfonic acid) 5625-37-6
Platinum Metal 7440-06-4
Platinum (IV) Dioxide 1314-15-4
Osmium (VIII) Oxide Solutions 1% and 2% w/v 7732-18-5
Orthophosphoric acid 100% 7664-38-2
Oil Red O 14288-70-1
Nonidet P40 9036-19-5
N-Nonane 111-84-2
Nitroso-R-Salt 525-05-3
4-Nitrophenyl Disodium Orthophosphate 4263-52-9
Melamine 108-78-1
4-(4-Nitrophenylazo)resorcinol 74-39-5
4-Nitrotoluene 99-99-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net