Search   
MSDS 
:
 Polyvinyl Pyrrolidone
CAS 
:
 9003-39-8
SYNONYMS 
:
 1-Ethenyl-2 Pyrrolidinone Homopolymer; PVP
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 9003-39-8 |Polyvinyl pyrrolidone | ca.100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
Animal studies have reported the development of tumors.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. During a fire, irritating and highly
toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 9003-39-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white to off-white
Odor: none reported
pH: 3-7 (1/20 sol)
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 212 deg F
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble.
Specific Gravity/Density: 1.1-1.3
Molecular Formula: C6H9NO
Molecular Weight: 111.0691

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, incompatible materials, dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 9003-39-8: TR8160000 TR8170000 TR8180000 TR8250000
TR8300000 TR8350000 TR8360000 TR8370000
LD50/LC50:
CAS# 9003-39-8: Oral, mouse: LD50 = >40 gm/kg; Oral, rabbit: LD50 =
1040 mg/kg; Oral, rat: LD50 = 100 gm/kg.
Carcinogenicity:
Polyvinyl pyrrolidone -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 9003-39-8: 1
Canada
CAS# 9003-39-8 is listed on Canada's DSL List.
CAS# 9003-39-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 9003-39-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/15/1999 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Phenylhydrazium Chloride 59-38-1
Magnesium nitrate 10377-60-3
Phenyl Mercury Acetate 62-38-4
Phenyl Mercury Chloride 100-56-1
Magnesium Sulfate, Hydrated 10034-99-8
Phenylmethylsulfonyl Fluoride 329-98-6
Phenylthiourea 103-85-5
Malachite Green (Oxalate) Certified 2437-29-8
Iso-Phorone 78-59-1
Maltose 69-79-4
Isopropyl Myristate, 96% (GC) 110-27-0
Phosgene solution in toluene 75-44-5
DL-Mandelic acid 90-64-2
Phosphorus Red Amorphous 7723-14-0
Manganese metal 7439-96-5
Phosphorus, White Sticks 7723-14-0
Polyvinyl Pyrrolidone 9003-39-8
o-Tolylhydrazine hydrochloride, 98% 635-26-7
5-Hydroxyindole, 97% 1953-54-4
Manganese (II) Acetate Tetrahydrate 6156-78-1
Phosphorus Pentasulfide 1314-80-3
Phosphorus Tribromide 7789-60-8
Phosphorus Trichloride 7719-12-2
N,N-Diethyl-m-toluamide, 95% 134-62-3
Phthalic Acid 88-99-3
Magnesium Chloride Solution 7732-18-5
Chloromethyl Methyl Sulfide, 95% 2373-51-5
Manganese(II) sulfate, tetrahydrate 7785-87-7
Manganese(II) sulfate, dried powder 7785-87-7
D- (+)- Mannose 3458-28-4
Marble Chips 471-34-1
Phthalic Anhydride 85-44-9
Phthalimide 85-41-6
Picrolonic Acid 550-74-3
Picric Acid, Moistened with 40.0% Water 88-89-1
Pinacol 76-09-5
Piperazine Hydrate 142-63-2
Piperazine-N,N bis(2-ethane sulfonic acid) 5625-37-6
Platinum Metal 7440-06-4
Platinum (IV) Dioxide 1314-15-4
Osmium (VIII) Oxide Solutions 1% and 2% w/v 7732-18-5
Orthophosphoric acid 100% 7664-38-2
Oil Red O 14288-70-1
Nonidet P40 9036-19-5
N-Nonane 111-84-2
Nitroso-R-Salt 525-05-3
4-Nitrophenyl Disodium Orthophosphate 4263-52-9
Melamine 108-78-1
4-(4-Nitrophenylazo)resorcinol 74-39-5
4-Nitrotoluene 99-99-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net