Search   
MSDS 
:
 Phosphorus Red Amorphous
CAS 
:
 7723-14-0
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7723-14-0 |Phosphorus | 100 | 231-768-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11 16 52/53

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Explosive when mixed with oxidizing substances.
Harmful to aquatic organisms, may cause long-term adverse effects in
the aquatic environment.Light sensitive.Highly toxic.

Potential Health Effects
Eye:
May cause eye irritation. May result in corneal injury.
Skin:
Prolonged and/or repeated contact may cause irritation and/or
dermatitis.
Ingestion:
May be fatal if swallowed. May cause irritation of the digestive
tract. May cause liver and kidney damage.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. May cause
liver and kidney damage. Chronic exposure can lead to necrosis of the
jaw, or 'phossy-jaw'.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Containers may explode in the heat of a fire. This
material is readily combustible and may ignite if exposed to
friction. Flammable solid. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas. May
re-ignite after fire is extinguished.
Extinguishing Media:
DO NOT USE WATER! Cool containers with flooding quantities of water
until well after fire is out. Use dry sand, dry chemical, soda ash
or lime.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal. Avoid generating dusty conditions.
Cover with sand and place into a closed container for disposal.
Remove all sources of ignition. Use a spark-proof tool. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Ground and bond
containers when transferring material. Avoid contact with eyes, skin,
and clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep away from heat, sparks and flame.
Avoid ingestion and inhalation. Store protected from light. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area. Store protected from light.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 7723-14-0:
United Kingdom, WEL - TWA: 0.1 mg/m3 TWA
United Kingdom, WEL - STEL: 0.3 mg/m3 STEL
United States OSHA: 0.1 mg/m3 TWA
Belgium - TWA: 0.02 ppm VLE; 0.1 mg/m3 VLE
Germany: 0.1 mg/m3 TWA (inhalable fraction)
Japan: 0.1 mg/m3 OEL
Malaysia: 0.02 ppm TWA; 0.1 mg/m3 TWA
Netherlands: 0.1 mg/m3 MAC
Russia: 0.03 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: dark red
Odor: odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 416 deg C (sublimes)
Freezing/Melting Point: 416 deg C
Autoignition Temperature: 260 deg C ( 500.00 deg F)
Flash Point: Not available.
Explosion Limits, lower: None available
Explosion Limits, upper: None available
Decomposition Temperature: 290 deg C
Solubility in water: Insoluble in water.
Specific Gravity/Density: 2.34
Molecular Formula: P
Molecular Weight: 30.9738

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Red, white and yellow phosphorus reacts explosively with a large
number of compounds and elements. Please refer to NFPA 's Fire
Protection guide to Hazardous Materials for details. May explode on
contact with oxidizing materials. Produces acrid fumes in air. Can be
ignited by friction, static electric discharge, heating and mixing
with strong oxidizing agents. Reacts with halogens, halides, sulfur
and oxidizing materials.
Hazardous Decomposition Products:
Phosphine, oxides of phosphorus, irritating and toxic fumes and
gases.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7723-14-0: TH3495000 TH3500000
LD50/LC50:
CAS# 7723-14-0: Oral, mouse: LD50 = 11.5 mg/kg; Oral, mouse: LD50 =
4820 ug/kg; Oral, rabbit: LD50 = 105 mg/kg; Oral, rat: LD50 = 11.5
mg/kg; Oral, rat: LD50 = 3030 ug/kg.
Carcinogenicity:
Phosphorus -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: PHOSPHORUS, AMORPHOUS
Hazard Class: 4.1
UN Number: 1338
Packing Group: III
IMO
Shipping Name: PHOSPHORUS, AMORPHOUS
Hazard Class: 4.1
UN Number: 1338
Packing Group: III
RID/ADR
Shipping Name: PHOSPHORUS, AMORPHOUS
Hazard Class: 4.1
UN Number: 1338
Packing group: III
USA RQ: CAS# 7723-14-0: 1 lb final RQ; 0.454 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
R 16 Explosive when mixed with oxidizing substances.
R 52/53 Harmful to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 7 Keep container tightly closed.
S 43C In case of fire, use limestone powder, sodium
chloride or dry sand (never use water).
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 7723-14-0: No information available.
Canada
CAS# 7723-14-0 is listed on Canada's DSL List.
CAS# 7723-14-0 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7723-14-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/07/1998 Revision #5 Date: 8/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Phenylhydrazium Chloride 59-38-1
Magnesium nitrate 10377-60-3
Phenyl Mercury Acetate 62-38-4
Phenyl Mercury Chloride 100-56-1
Magnesium Sulfate, Hydrated 10034-99-8
Phenylmethylsulfonyl Fluoride 329-98-6
Phenylthiourea 103-85-5
Malachite Green (Oxalate) Certified 2437-29-8
Iso-Phorone 78-59-1
Maltose 69-79-4
Isopropyl Myristate, 96% (GC) 110-27-0
Phosgene solution in toluene 75-44-5
DL-Mandelic acid 90-64-2
Phosphorus Red Amorphous 7723-14-0
Manganese metal 7439-96-5
Phosphorus, White Sticks 7723-14-0
Polyvinyl Pyrrolidone 9003-39-8
o-Tolylhydrazine hydrochloride, 98% 635-26-7
5-Hydroxyindole, 97% 1953-54-4
Manganese (II) Acetate Tetrahydrate 6156-78-1
Phosphorus Pentasulfide 1314-80-3
Phosphorus Tribromide 7789-60-8
Phosphorus Trichloride 7719-12-2
N,N-Diethyl-m-toluamide, 95% 134-62-3
Phthalic Acid 88-99-3
Magnesium Chloride Solution 7732-18-5
Chloromethyl Methyl Sulfide, 95% 2373-51-5
Manganese(II) sulfate, tetrahydrate 7785-87-7
Manganese(II) sulfate, dried powder 7785-87-7
D- (+)- Mannose 3458-28-4
Marble Chips 471-34-1
Phthalic Anhydride 85-44-9
Phthalimide 85-41-6
Picrolonic Acid 550-74-3
Picric Acid, Moistened with 40.0% Water 88-89-1
Pinacol 76-09-5
Piperazine Hydrate 142-63-2
Piperazine-N,N bis(2-ethane sulfonic acid) 5625-37-6
Platinum Metal 7440-06-4
Platinum (IV) Dioxide 1314-15-4
Osmium (VIII) Oxide Solutions 1% and 2% w/v 7732-18-5
Orthophosphoric acid 100% 7664-38-2
Oil Red O 14288-70-1
Nonidet P40 9036-19-5
N-Nonane 111-84-2
Nitroso-R-Salt 525-05-3
4-Nitrophenyl Disodium Orthophosphate 4263-52-9
Melamine 108-78-1
4-(4-Nitrophenylazo)resorcinol 74-39-5
4-Nitrotoluene 99-99-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net