Search   
MSDS 
:
 Piperazine, anhydrous, 99%
CAS 
:
 110-85-0
SYNONYMS 
:
 Antitren; 1,4-Diethylenediamine; N,N-Diethylenediamine;     Hexahydro-1,4-diazine; Piperazidine; Pyrazine hexahydrate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 110-85-0 |Piperazine, anhydrous | 100 | 203-808-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34 42/43 52/53

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns. May cause sensitization by inhalation and skin
contact. Harmful to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.Corrosive.Hygroscopic (absorbs
moisture from the air).Light sensitive.

Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns.
Skin:
May cause skin sensitization, an allergic reaction, which becomes
evident upon re-exposure to this material. Contact with skin causes
irritation and possible burns, especially if the skin is wet or
moist.
Ingestion:
May cause severe gastrointestinal tract irritation with nausea,
vomiting and possible burns.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. May cause asthmatic attacks due to allergic
sensitization of the respiratory tract. Causes chemical burns to the
respiratory tract.
Chronic:
Prolonged or repeated skin contact may cause sensitization
dermatitis and possible destruction and/or ulceration. Prolonged or
repeated exposure may cause permanent eye damage. Repeated exposure
may cause allergic respiratory reaction (asthma).

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Gently lift eyelids and flush
continuously with water.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up, then place into a suitable container for disposal.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Do not get on skin
or in eyes. Do not ingest or inhale.
Storage:
Keep away from heat, sparks, and flame. Store in a cool, dry place.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 110-85-0:
United Kingdom, WEL - TWA: 0.1 mg/m3 TWA
United Kingdom, WEL - STEL: 0.3 mg/m3 STEL

Belgium - TWA: 0.1 mg/m3 VLE
Belgium - STEL: 0.3 mg/m3 VLE
Germany: 0.1 mg/m3 TWA
Spain: 0.1 mg/m3 VLA-ED
Spain: 0.3 mg/m3 VLA-EC

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: Not available.
Odor: Ammonia-like odor.
pH: Not available.
Vapor Pressure: .8 mm Hg
Viscosity: Not available.
Boiling Point: 145.0 - 146.0 deg C @ 760.00mm Hg
Freezing/Melting Point: 108.00 - 110.00 deg C
Autoignition Temperature: 340 deg C ( 644.00 deg F)
Flash Point: 82 deg C ( 179.60 deg F)
Explosion Limits, lower: 4.00 vol %
Explosion Limits, upper: 14.00 vol %
Decomposition Temperature:
Solubility in water: practically insoluble in ether
Specific Gravity/Density:
Molecular Formula: C4H10N2
Molecular Weight: 86.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents; strong acids; acid chlorides; acid
anhydrides; light; moisture; dicyanofurazan.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, nitrogen.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 110-85-0: TK7800000
LD50/LC50:
CAS# 110-85-0: Draize test, rabbit, eye: 250 ug Severe; Draize test,
rabbit, eye: 250 ug/24H Severe; Inhalation, mouse: LC50 = 5400
mg/m3/2H; Oral, mouse: LD50 = 600 mg/kg; Oral, rat: LD50 = 1900
mg/kg; Skin, rabbit: LD50 = 4 mL/kg.
Carcinogenicity:
Piperazine, anhydrous -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: PIPERAZINE
Hazard Class: 8
UN Number: 2579
Packing Group: III
IMO
Shipping Name: PIPERAZINE, SOLID or SOLUTION
Hazard Class: 8
UN Number: 2579
Packing Group: III
RID/ADR
Shipping Name: PIPERAZINE
Hazard Class: 8
UN Number: 2579
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
R 42/43 May cause sensitization by inhalation and
skin contact.
R 52/53 Harmful to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 22 Do not breathe dust.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 110-85-0: 2
Canada
CAS# 110-85-0 is listed on Canada's DSL List.
CAS# 110-85-0 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 110-85-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/24/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Isopropanol, 70.0% 67-63-0
Di-tert-butyl dicarbonate 24424-99-5
DL-Phenylsuccinic Acid, 98% 635-51-8
Nitric Acid, 50% 7697-37-2
Ammonium Thiocyanate, 0.1N 1762-95-4
Potassium Hydroxide, 1.0N 1310-58-3
Potassium Hydroxide, 0.5N Solution in Ethanol 64-17-5
Nitric acid, 1.0N aqueous solution 7697-37-2
Ammonium hydroxide water solution, <3N NH4OH (<5% as ammonia, NH3) 1336-21-6
Lactic Acid, 1.0 N 50-21-5
Citric acid, 1.0M aqueous solution 77-92-9
Ammonium hydroxide water solution, >3N but <5.7N NH4OH (>5% but <10% 1336-21-6
Ammonium oxalate, 4% aqueous solution w/v 1113-38-8
Potassium Hydroxide Solution, 10.0% 1310-58-3
M-Cresol Purple, 0.1% 2303-01-7
Cresol Red Indicator Solution, 0.04% 7732-18-5
Barium chloride, 0.1N aqueous solution 7732-18-5
Chromic Acid, 10.0% 1333-82-0
2-Chloro-4-(3-Chlorophenyl)-Quinazoline 0-01-1
9-[2-(tert-Butyldimethylsilanyloxy)ethyl]-6-chloro-9H-purine. 0-01-1
3-Phenoxypropyl Bromide, 95% 588-63-6
7-[2-(tert-Butyl-Dimethyl-Silanyloxy)-Ethyl]-6-Chloro-7H-Purine 0-01-1
4-Chloro-5-(2,4-Dichlorophenoxy)-2,6-Dimethyl-Pyrimidine 0-01-1
4-Chloro-6-(4-Methoxy Benzyl) Pyrimidine 0-01-1
6-Chloro-9-Ethyl-9H-Purine 5462-86-2
Propiolic acid, 98% 471-25-0
2-Chloro-4-o-Tolyl Pyrimidine 0-01-1
2-Chloro-4-(3-Chlorophenyl) Pyrimidine 0-01-1
Piperazine, anhydrous, 99% 110-85-0
2,2,2-Trifluoroethylhydrazine, 60 wt% aqueous solution 5042-30-8
4-Chloro-2,6-Dimethyl Pyrimidine 0-01-1
2-Chloro-4-(2-Methyl-2H-Pyrazol-3-yl)-Quinazoline 0-01-1
2-Chloro-4-Pyridin-2-yl-Quinazoline 0-01-1
4-Chloro-7H-Pyrrolo [2,3-d] Pyrimidine 3680-69-1
2-Chloro-4-(1-Methyl-1H-Imidazol-2-yl)-Quinazoline 0-01-1
4,5-Dichloro-6-Ethyl Pyrimidine 0-01-1
4-Chloro-6-(4-Methoxyphenyl)-2-Methyl Pyrimidine 142220-68-6
QUANTI-CULT, Dehydrated Live Organisms 0-00-0
Lancerclean Acid 64-19-7
Carbonate Buffer 497-19-8
Disodium p-Nitrophenyl Phosphate 0-01-1
Cryoscope Bath Liquid 107-21-1
Iron Alum Indicator 7697-37-2
Kovacs Reagent 71-41-0
(1R)-endo-(+)-Fenchol, 96% 2217-02-9
Cryoscope Standards 0-01-1
Diamond Slurry, Water, MD, 30UM 0-01-1
Acetic acid/chloroform, 2:1 mix 64-19-7
Acetic acid, 3% 64-19-7
Congo Red Indicator, 0.1% aqueous 573-58-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net