Search   
MSDS 
:
 Di-tert-butyl dicarbonate
CAS 
:
 24424-99-5
SYNONYMS 
:
 Di-tert-butyl pyrocarbonate; DIBOC.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 24424-99-5 |Di-tert-butyl dicarbonate | 99 | 246-240-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T+
Risk Phrases: 10 26 36/37/38 43

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Very toxic by inhalation. Irritating to eyes, respiratory
system and skin. May cause sensitization by skin contact.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause skin irritation and possible burns. May cause
sensitization by skin contact.
Ingestion:
May cause digestive tract disturbances. The toxicological properties
of this substance have not been fully investigated. May cause nausea,
vomiting, abdominal pain, and increased salivation.
Inhalation:
May be fatal if inhaled. May cause respiratory tract irritation. The
toxicological properties of this substance have not been fully
investigated. May cause dyspnea (difficult or labored breathing).
Olfactory fatigue may occur. Can produce delayed pulmonary edema.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, immediately flush skin with soap and plenty of
water. Remove contaminated clothing and shoes. Get medical aid if
symptoms occur. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
POISON material. If inhaled, get medical aid immediately. Remove
victim to fresh air. If not breathing, give artificial respiration.
If breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Use water spray to keep fire-exposed containers
cool. Containers may explode in the heat of a fire. Flammable solid.
May burn rapidly with flare burning effect. May re-ignite after fire
is extinguished.
Extinguishing Media:
Water may be ineffective. For large fires, use water spray, fog or
regular foam. Contact professional fire-fighters immediately. For
small fires, use dry chemical, carbon dioxide, sand, earth, water
spray or regular foam. Cool containers with flooding quantities of
water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal. Scoop up with a nonsparking tool,
then place into a suitable container for disposal. Remove all sources
of ignition. Use a spark-proof tool. A vapor suppressing foam may be
used to reduce vapors. Water spray may reduce vapor but may not
prevent ignition in closed spaces.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Ground and bond containers when
transferring material. Use spark-proof tools and explosion proof
equipment. Avoid contact with eyes, skin, and clothing. Do not
breathe dust, vapor, mist, or gas. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames. Use only with adequate
ventilation.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
refrigerated. (Store below 4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 24424-99-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid or liquid
Color: clear or slight yellow
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 56 - 57 deg C @ .50mm Hg
Freezing/Melting Point: 23 deg C
Autoignition Temperature: Not available.
Flash Point: 37 deg C ( 98.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: 1.02 g/cm3
Molecular Formula: C10H18O5
Molecular Weight: 218.25

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, acids, bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 24424-99-5: HT0230000
LD50/LC50:
CAS# 24424-99-5: Inhalation, rat: LC50 = 100 mg/m3/4H.
One hour LC50 can be approximated as 400 mg/1000 liter or .4
mg/liter.
Carcinogenicity:
Di-tert-butyl dicarbonate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, FLAMMABLE, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2930
Packing Group: I
IMO
Shipping Name: TOXIC SOLID, FLAMMABLE, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2930
Packing Group: I
RID/ADR
Shipping Name: TOXIC SOLID, FLAMMABLE, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2930
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T+
Risk Phrases:
R 10 Flammable.
R 26 Very toxic by inhalation.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
R 43 May cause sensitization by skin contact.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 24 Avoid contact with skin.
S 37/39 Wear suitable gloves and eye/face
protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 24424-99-5: No information available.
Canada
CAS# 24424-99-5 is listed on Canada's DSL List.
CAS# 24424-99-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 24424-99-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/14/2002 Revision #6 Date: 10/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Isopropanol, 70.0% 67-63-0
Di-tert-butyl dicarbonate 24424-99-5
DL-Phenylsuccinic Acid, 98% 635-51-8
Nitric Acid, 50% 7697-37-2
Ammonium Thiocyanate, 0.1N 1762-95-4
Potassium Hydroxide, 1.0N 1310-58-3
Potassium Hydroxide, 0.5N Solution in Ethanol 64-17-5
Nitric acid, 1.0N aqueous solution 7697-37-2
Ammonium hydroxide water solution, <3N NH4OH (<5% as ammonia, NH3) 1336-21-6
Lactic Acid, 1.0 N 50-21-5
Citric acid, 1.0M aqueous solution 77-92-9
Ammonium hydroxide water solution, >3N but <5.7N NH4OH (>5% but <10% 1336-21-6
Ammonium oxalate, 4% aqueous solution w/v 1113-38-8
Potassium Hydroxide Solution, 10.0% 1310-58-3
M-Cresol Purple, 0.1% 2303-01-7
Cresol Red Indicator Solution, 0.04% 7732-18-5
Barium chloride, 0.1N aqueous solution 7732-18-5
Chromic Acid, 10.0% 1333-82-0
2-Chloro-4-(3-Chlorophenyl)-Quinazoline 0-01-1
9-[2-(tert-Butyldimethylsilanyloxy)ethyl]-6-chloro-9H-purine. 0-01-1
3-Phenoxypropyl Bromide, 95% 588-63-6
7-[2-(tert-Butyl-Dimethyl-Silanyloxy)-Ethyl]-6-Chloro-7H-Purine 0-01-1
4-Chloro-5-(2,4-Dichlorophenoxy)-2,6-Dimethyl-Pyrimidine 0-01-1
4-Chloro-6-(4-Methoxy Benzyl) Pyrimidine 0-01-1
6-Chloro-9-Ethyl-9H-Purine 5462-86-2
Propiolic acid, 98% 471-25-0
2-Chloro-4-o-Tolyl Pyrimidine 0-01-1
2-Chloro-4-(3-Chlorophenyl) Pyrimidine 0-01-1
Piperazine, anhydrous, 99% 110-85-0
2,2,2-Trifluoroethylhydrazine, 60 wt% aqueous solution 5042-30-8
4-Chloro-2,6-Dimethyl Pyrimidine 0-01-1
2-Chloro-4-(2-Methyl-2H-Pyrazol-3-yl)-Quinazoline 0-01-1
2-Chloro-4-Pyridin-2-yl-Quinazoline 0-01-1
4-Chloro-7H-Pyrrolo [2,3-d] Pyrimidine 3680-69-1
2-Chloro-4-(1-Methyl-1H-Imidazol-2-yl)-Quinazoline 0-01-1
4,5-Dichloro-6-Ethyl Pyrimidine 0-01-1
4-Chloro-6-(4-Methoxyphenyl)-2-Methyl Pyrimidine 142220-68-6
QUANTI-CULT, Dehydrated Live Organisms 0-00-0
Lancerclean Acid 64-19-7
Carbonate Buffer 497-19-8
Disodium p-Nitrophenyl Phosphate 0-01-1
Cryoscope Bath Liquid 107-21-1
Iron Alum Indicator 7697-37-2
Kovacs Reagent 71-41-0
(1R)-endo-(+)-Fenchol, 96% 2217-02-9
Cryoscope Standards 0-01-1
Diamond Slurry, Water, MD, 30UM 0-01-1
Acetic acid/chloroform, 2:1 mix 64-19-7
Acetic acid, 3% 64-19-7
Congo Red Indicator, 0.1% aqueous 573-58-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net