Search   
MSDS 
:
 Potassium Hydroxide, 1.0N
CAS 
:
 1310-58-3
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 1310-58-3 |Potassium Hydroxide | 3.0-4.0% | 215-181-3 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | Balance | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: C
Risk Phrases: 22 35

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Causes severe burns.Corrosive.

Potential Health Effects
Eye:
Causes severe eye burns. May cause irreversible eye injury.
Contact may cause ulceration of the conjunctiva and cornea. Eye
damage may be delayed.
Skin:
Causes skin burns. May cause deep, penetrating ulcers of the skin.
Ingestion:
Harmful if swallowed. May cause circulatory system failure. May
cause perforation of the digestive tract. Causes severe digestive
tract burns with abdominal pain, vomiting, and possible death.
Inhalation:
Irritation may lead to chemical pneumonitis and pulmonary edema.
Causes severe irritation of upper respiratory tract with coughing,
burns, breathing difficulty, and possible coma.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Prolonged
or repeated eye contact may cause conjunctivitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Discard contaminated clothing in a manner which limits
further exposure.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
Wear appropriate protective clothing to prevent contact with skin
and eyes. Wear a self-contained breathing apparatus (SCBA) to
prevent contact with thermal decomposition products. Use water with
caution and in flooding amounts. Contact with moisture or water may
generate sufficient heat to ignite nearby combustible materials.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Neutralize spill with a weak acid
such as vinegar or acetic acid. Avoid runoff into storm sewers and
ditches which lead to waterways.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Do not allow water
to get into the container because of violent reaction. Do not get in
eyes, on skin, or on clothing. Do not ingest or inhale.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep away
from strong acids.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 1310-58-3:
United Kingdom, WEL - STEL: 2 mg/m3 STEL

Belgium - STEL: 2 mg/m3 VLE
France - VLE: 2 mg/m3 VLE
Japan: 2 mg/m3 Ceiling
Malaysia: 2 mg/m3 Ceiling
Spain: 2 mg/m3 VLA-EC
CAS# 7732-18-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: none reported
pH: 13.2-13.5
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Completely soluble in water.
Specific Gravity/Density: 1.3
Molecular Formula: Mixture
Molecular Weight: 0

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, acids, metals.
Incompatibilities with Other Materials:
Potassium hydroxide reacts with chlorine dioxide, nitrobenzene,
nitromethane, nitrogen trichloride, peroxidized tetrahydrofuran,
2,4,6-trinitrotoluene, bromoform+ crown ethers, acids alcohols,
sugars, germanium cyclopentadiene, maleic dicarbide. Corrosive to
metals such as aluminum, tin, and zinc to cause formation of
flammable hydrogen gas.
Hazardous Decomposition Products:
Oxides of potassium.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1310-58-3: TT2100000
CAS# 7732-18-5: ZC0110000
LD50/LC50:
CAS# 1310-58-3: Draize test, rabbit, skin: 50 mg/24H Severe; Oral,
rat: LD50 = 273 mg/kg.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
Potassium Hydroxide -
Not listed by ACGIH, IARC, or NTP.
Water -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
USA RQ: CAS# 1310-58-3: 1000 lb final RQ; 454 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 35 Causes severe burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 1310-58-3: 1
CAS# 7732-18-5: No information available.
Canada
CAS# 1310-58-3 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 1310-58-3 is listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1310-58-3 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 1/15/2002 Revision #2 Date: 10/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Isopropanol, 70.0% 67-63-0
Di-tert-butyl dicarbonate 24424-99-5
DL-Phenylsuccinic Acid, 98% 635-51-8
Nitric Acid, 50% 7697-37-2
Ammonium Thiocyanate, 0.1N 1762-95-4
Potassium Hydroxide, 1.0N 1310-58-3
Potassium Hydroxide, 0.5N Solution in Ethanol 64-17-5
Nitric acid, 1.0N aqueous solution 7697-37-2
Ammonium hydroxide water solution, <3N NH4OH (<5% as ammonia, NH3) 1336-21-6
Lactic Acid, 1.0 N 50-21-5
Citric acid, 1.0M aqueous solution 77-92-9
Ammonium hydroxide water solution, >3N but <5.7N NH4OH (>5% but <10% 1336-21-6
Ammonium oxalate, 4% aqueous solution w/v 1113-38-8
Potassium Hydroxide Solution, 10.0% 1310-58-3
M-Cresol Purple, 0.1% 2303-01-7
Cresol Red Indicator Solution, 0.04% 7732-18-5
Barium chloride, 0.1N aqueous solution 7732-18-5
Chromic Acid, 10.0% 1333-82-0
2-Chloro-4-(3-Chlorophenyl)-Quinazoline 0-01-1
9-[2-(tert-Butyldimethylsilanyloxy)ethyl]-6-chloro-9H-purine. 0-01-1
3-Phenoxypropyl Bromide, 95% 588-63-6
7-[2-(tert-Butyl-Dimethyl-Silanyloxy)-Ethyl]-6-Chloro-7H-Purine 0-01-1
4-Chloro-5-(2,4-Dichlorophenoxy)-2,6-Dimethyl-Pyrimidine 0-01-1
4-Chloro-6-(4-Methoxy Benzyl) Pyrimidine 0-01-1
6-Chloro-9-Ethyl-9H-Purine 5462-86-2
Propiolic acid, 98% 471-25-0
2-Chloro-4-o-Tolyl Pyrimidine 0-01-1
2-Chloro-4-(3-Chlorophenyl) Pyrimidine 0-01-1
Piperazine, anhydrous, 99% 110-85-0
2,2,2-Trifluoroethylhydrazine, 60 wt% aqueous solution 5042-30-8
4-Chloro-2,6-Dimethyl Pyrimidine 0-01-1
2-Chloro-4-(2-Methyl-2H-Pyrazol-3-yl)-Quinazoline 0-01-1
2-Chloro-4-Pyridin-2-yl-Quinazoline 0-01-1
4-Chloro-7H-Pyrrolo [2,3-d] Pyrimidine 3680-69-1
2-Chloro-4-(1-Methyl-1H-Imidazol-2-yl)-Quinazoline 0-01-1
4,5-Dichloro-6-Ethyl Pyrimidine 0-01-1
4-Chloro-6-(4-Methoxyphenyl)-2-Methyl Pyrimidine 142220-68-6
QUANTI-CULT, Dehydrated Live Organisms 0-00-0
Lancerclean Acid 64-19-7
Carbonate Buffer 497-19-8
Disodium p-Nitrophenyl Phosphate 0-01-1
Cryoscope Bath Liquid 107-21-1
Iron Alum Indicator 7697-37-2
Kovacs Reagent 71-41-0
(1R)-endo-(+)-Fenchol, 96% 2217-02-9
Cryoscope Standards 0-01-1
Diamond Slurry, Water, MD, 30UM 0-01-1
Acetic acid/chloroform, 2:1 mix 64-19-7
Acetic acid, 3% 64-19-7
Congo Red Indicator, 0.1% aqueous 573-58-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net