Search   
MSDS 
:
 Sebacoyl Chloride
CAS 
:
 111-19-3
SYNONYMS 
:
 Sebacyl Chloride
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 111-19-3 |Sebacoyl Chloride | 100.0 | 203-843-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.Corrosive.Lachrymator (substance
which increases the flow of tears).

Potential Health Effects
Eye:
Contact with liquid is corrosive to the eyes and causes severe
burns. Lachrymator (substance which increases the flow of tears).
Skin:
Contact with liquid is corrosive and causes severe burns and
ulceration.
Ingestion:
Harmful if swallowed. May cause severe and permanent damage to the
digestive tract. Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Repeated
exposure may cause erosion of teeth.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas. Containers may explode if exposed to fire.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Absorb spill using an absorbent, non-combustible
material such as earth, sand, or vermiculite. Do not use combustible
materials such as sawdust. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Keep container tightly closed. Do not get on skin
or in eyes. Do not ingest or inhale. Use with adequate ventilation.
Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 111-19-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: 12 mm Hg
Viscosity: Not available.
Boiling Point: 220 deg C
Freezing/Melting Point: -2.5 deg C
Autoignition Temperature: Not applicable.
Flash Point: 110 deg C ( 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Decomposed by water
Specific Gravity/Density: 1.12
Molecular Formula: ClCO(CH2)8COCl
Molecular Weight: 239.0168

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moisture, exposure to moist air or water.
Incompatibilities with Other Materials:
Oxidizing agents, strong acids, bases, alcohols.
Hazardous Decomposition Products:
Hydrogen chloride, phosgene, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 111-19-3: HD8454250
LD50/LC50:
CAS# 111-19-3: Dermal, guinea pig: LD50 = 50 uL/kg; Draize test,
rabbit, eye: 45 uL Severe; Oral, mouse: LD50 = >1600 mg/kg; Oral,
rat: LD50 = 400 mg/kg.
Carcinogenicity:
Sebacoyl Chloride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, TOXIC, N.O.S.
Hazard Class: 8 (6.1)
UN Number: 2922
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, TOXIC, N.O.S.
Hazard Class: 8 (6.1)
UN Number: 2922
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, TOXIC, N.O.S.
Hazard Class: 8 (6.1)
UN Number: 2922
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 111-19-3: No information available.
Canada
CAS# 111-19-3 is listed on Canada's DSL List.
CAS# 111-19-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 111-19-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/06/1998 Revision #5 Date: 3/07/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Propane-1,3-diol 504-63-2
Pyrrolidine 123-75-1
Phigel 2 79-06-1
Phigel 1 79-06-1
Phigel 3 79-06-1
9(10H)-Acridone (Pract), 96% 578-95-0
Silver Cyanide 506-64-9
Sodium Hydride, 80% Dispersion in Mineral Oil 7646-69-7
Silver Perchlorate 7783-93-9
Sebacoyl Chloride 111-19-3
Selenious acid 7783-00-8
Selenium Dioxide 7446-08-4
Selenium 7782-49-2
Palladium 5% on Charcoal 7440-05-3
Phenyllithium, 2M solution in cyclohexane- ether, 70 to 30 60-29-7
Odorless Preservative 0-00-0
Page Blue 83 6104-59-2
Pancreatin (From mammalian pancreas) 8049-47-6
Papain from Papaya Juice 9001-73-4
Phosphomolybdic acid, reagent acs (crystals) 12026-57-2
N,n'-bis(methoxymethyl)diaza-15-crown-5 98%
Paraffin Liquid Light and Heavy 92062-35-6
Paraffin Soft Yellow/White 64771-71-7
Paraffin wax 8002-74-2
Paraldehyde 123-63-7
Pectin 9000-69-5
Rhodamine 19 perchlorate, laser grade 62669-66-3
Pentafluorobenzyl Bromide 1765-40-8
0-(2,3,4,5,6-Pentafluorobenzyl) Hydroxylamine Hydrochloride 57981-02-9
n-Pentane and Pentane Mixed Isomers 109-66-0
0.1M 1-Pentane Sulfonic Acid Sodium Salt 7732-18-5
Pentan-2-Ol 6032-29-7
Peptone 73049-73-7
Perchloric acid 50-70% 7601-90-3
Peroxyphthalic acid magnesium salt, hexahydrate
Petroleum Ether 30-100C 78-78-4
Phenacyl Bromide 70-11-1
Phenanthrene 85-01-8
Phenazone 60-80-0
Phenosafranine 81-93-6
Cyclohexyl isothiocyanate, 98% 1122-82-3
N-Phenylanthranilic Acid
DL-Phenylalanine 150-30-1
o-Phenylenediamine 95-54-5
m-Phenylenediamine 108-45-2
Magnesium Chloride, Hexahydrate 7791-18-6
p-Phenylenediamine 106-50-3
2-Phenylethanol 60-12-8
2-Phenylethylamine 64-04-0
Phenylhydrazine 100-63-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net