Search   
MSDS 
:
 Pentan-2-Ol
CAS 
:
 6032-29-7
SYNONYMS 
:
 DL-2-Pentanol; DL-Sec-Amyl Alcohol; Methyl Propyl Carbinol.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 6032-29-7 |Sec-Amyl Alcohol | 100.0 | 227-907-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: 10

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable.

Potential Health Effects
Eye:
Vapors may cause eye irritation. Contact may cause eye irritation,
lacrimation (tearing), burning pain, and inflammation.
Skin:
May cause skin irritation. May be absorbed through the skin. Causes
symptoms similar to those of inhalation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause effects similar to those for inhalation
exposure.
Inhalation:
Inhalation of high concentrations may cause central nervous system
effects characterized by nausea, headache, dizziness, unconsciousness
and coma. Inhalation of vapor may cause respiratory tract irritation.
Irritation may lead to chemical pneumonitis and pulmonary edema. May
cause kidney damage.
Chronic:
Prolonged or repeated skin contact may cause dermatitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Immediately flush skin with plenty of soap and water for at least 15
minutes while removing contaminated clothing and shoes. Get medical
aid if irritation develops or persists. Wash clothing before reuse.
Ingestion:
Do NOT induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure to fresh air immediately. If not breathing,
give artificial respiration. If breathing is difficult, give oxygen.
Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors can travel to a source of ignition and flash
back. During a fire, irritating and highly toxic gases may be
generated by thermal decomposition or combustion. Use water spray to
keep fire-exposed containers cool. Containers may explode in the
heat of a fire. Flammable liquid and vapor. Vapors may be heavier
than air. They can spread along the ground and collect in low or
confined areas.
Extinguishing Media:
Water may be ineffective. For large fires, use dry chemical, carbon
dioxide, alcohol-resistant foam, or water spray. For small fires,
use dry chemical, carbon dioxide, sand, earth, water spray or
regular foam. Cool containers with flooding quantities of water
until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Remove all sources of ignition. Absorb spill using
an absorbent, non-combustible material such as earth, sand, or
vermiculite. Do not use combustible materials such as saw dust.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Ground and bond
containers when transferring material. Avoid contact with skin and
eyes. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Avoid ingestion and inhalation. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from sources of ignition. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29CFR
1910.134 or European Standard EN 149. Always use a
NIOSH or European Standard EN 149 approved respirator
when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Appearance: colourless
Odor: None
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 119 deg C
Freezing/Melting Point: -50 deg C
Autoignition Temperature: 340 deg C ( 644.00 deg F)
Flash Point: 40 deg C ( 104.00 deg F)
Explosion Limits, lower: 1.2
Explosion Limits, upper: 9.0
Decomposition Temperature: Not available.
Solubility in water: Slightly soluble in water.
Specific Gravity/Density: 0.8 (water=1)
Molecular Formula: C5H12O
Molecular Weight: 88.0834

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
High temperatures, incompatible materials, ignition sources.
Incompatibilities with Other Materials:
Strong oxidizing agents. Substance may explode on contact with
hydrogen trisulfide.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 6032-29-7: SA4900000
LD50/LC50:
CAS# 6032-29-7: Draize test, rabbit, eye: 20 mg/24H Moderate; Draize
test, rabbit, skin: 20 mg/24H Moderate; Oral, rabbit: LD50 = 2821
mg/kg.
Carcinogenicity:
Sec-Amyl Alcohol -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMYL ALCOHOLS
Hazard Class: 3
UN Number: 1105
Packing Group: III
IMO
Shipping Name: AMYL ALCOHOLS
Hazard Class: 3
UN Number: 1105
Packing Group: III
RID/ADR
Shipping Name: AMYL ALCOHOLS
Dangerous Goods Code: 3(31C)
UN Number: 1105

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
R 10 Flammable.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 6032-29-7: No information available.
United Kingdom Occupational Exposure Limits

Canada
CAS# 6032-29-7 is listed on Canada's DSL List.
CAS# 6032-29-7 is listed on Canada's Ingredient Disclosure List.
Exposure Limits
CAS# 6032-29-7: OEL-DENMARK:TWA 100 ppm (360 mg/m3)
OEL-POLAND:TWA 100 mg/m3;STEL 450 mg/m3
US FEDERAL
TSCA
CAS# 6032-29-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/05/1998 Revision #1 Date: 8/02/2000

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Propane-1,3-diol 504-63-2
Pyrrolidine 123-75-1
Phigel 2 79-06-1
Phigel 1 79-06-1
Phigel 3 79-06-1
9(10H)-Acridone (Pract), 96% 578-95-0
Silver Cyanide 506-64-9
Sodium Hydride, 80% Dispersion in Mineral Oil 7646-69-7
Silver Perchlorate 7783-93-9
Sebacoyl Chloride 111-19-3
Selenious acid 7783-00-8
Selenium Dioxide 7446-08-4
Selenium 7782-49-2
Palladium 5% on Charcoal 7440-05-3
Phenyllithium, 2M solution in cyclohexane- ether, 70 to 30 60-29-7
Odorless Preservative 0-00-0
Page Blue 83 6104-59-2
Pancreatin (From mammalian pancreas) 8049-47-6
Papain from Papaya Juice 9001-73-4
Phosphomolybdic acid, reagent acs (crystals) 12026-57-2
N,n'-bis(methoxymethyl)diaza-15-crown-5 98%
Paraffin Liquid Light and Heavy 92062-35-6
Paraffin Soft Yellow/White 64771-71-7
Paraffin wax 8002-74-2
Paraldehyde 123-63-7
Pectin 9000-69-5
Rhodamine 19 perchlorate, laser grade 62669-66-3
Pentafluorobenzyl Bromide 1765-40-8
0-(2,3,4,5,6-Pentafluorobenzyl) Hydroxylamine Hydrochloride 57981-02-9
n-Pentane and Pentane Mixed Isomers 109-66-0
0.1M 1-Pentane Sulfonic Acid Sodium Salt 7732-18-5
Pentan-2-Ol 6032-29-7
Peptone 73049-73-7
Perchloric acid 50-70% 7601-90-3
Peroxyphthalic acid magnesium salt, hexahydrate
Petroleum Ether 30-100C 78-78-4
Phenacyl Bromide 70-11-1
Phenanthrene 85-01-8
Phenazone 60-80-0
Phenosafranine 81-93-6
Cyclohexyl isothiocyanate, 98% 1122-82-3
N-Phenylanthranilic Acid
DL-Phenylalanine 150-30-1
o-Phenylenediamine 95-54-5
m-Phenylenediamine 108-45-2
Magnesium Chloride, Hexahydrate 7791-18-6
p-Phenylenediamine 106-50-3
2-Phenylethanol 60-12-8
2-Phenylethylamine 64-04-0
Phenylhydrazine 100-63-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net