Search   
MSDS 
:
 1-Bromooctane, 99%
CAS 
:
 111-83-1
SYNONYMS 
:
 Octyl bromide; 1-Octylbromide.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 111-83-1 |1-Bromooctane | 99 | 203-912-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid if irritation or symptoms occur.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear. Do
NOT use mouth-to-mouth resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Vapors may be heavier
than air. They can spread along the ground and collect in low or
confined areas. Containers may explode when heated. Combustible
liquid and vapor.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation. Keep away from heat and flame.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 111-83-1:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless to yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: 0.41 mm Hg @20C
Viscosity: Not available.
Boiling Point: 201 deg C
Freezing/Melting Point: -55 deg C
Autoignition Temperature: Not applicable.
Flash Point: 77 deg C ( 170.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Immiscible.
Specific Gravity/Density: 1.1100 g/ml
Molecular Formula: C8H17Br
Molecular Weight: 193.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, bases.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 111-83-1: RG8575000
LD50/LC50:
CAS# 111-83-1: Oral, rat: LD50 = 4490 uL/kg; Skin, rabbit: LD50 = 8
mL/kg.
Carcinogenicity:
1-Bromooctane -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 111-83-1: 1
Canada
CAS# 111-83-1 is listed on Canada's DSL List.
CAS# 111-83-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 111-83-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/06/1998 Revision #5 Date: 1/04/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Lanthanum(III) nitrate hexahydrate, 99.999% 10099-59-9
Methyl vinyl ketone, ca. 95%, stabilized with ca. 0.5% CH3CN, 0.5% 64-19-7
Lead, Powder, -325 Mesh, 99+% 7439-92-1
Triethoxyvinylsilane, 97% 78-08-0
2-Methylhexanoic Acid, 98% 4536-23-6
Lead(II) Acetate Trihydrate, P.A. 6080-56-4
1-Dodecanethiol 112-55-0
Lead (II) Nitrate, P.A. 10099-74-8
Lead subacetate, basic, reagent ACS, powder (for sugar analysis) 1335-32-6
Tetrabutylammonium perchlorate, contains max. 10% water, 99% 1923-70-2
3-Methyl-4-Nitrobenzyl Alcohol , 98% 80866-75-7
Light Green SF, Yellowish, High Purity Biological Stain 5141-20-8
Petroleum Ether, Boiling Range 40-65 Degr. C., P.A. 8032-32-4
Ligroine 8032-32-4
Ligroine, boiling range 90 - 110 degree C 8032-32-4
Petroleum Ether, Reagent ACS 8032-32-4
Petroleum Ether, Boiling Range 40-65 Degree C, C.P. 8032-32-4
Ligroine, boiling point 100-140 degree C 8032-32-4
Petroleum Ether, Boiling Range 80-110 Degree C, P.A. 8032-32-4
Petroleum Ether (Boiling Range 60-95), C.P. 8032-32-4
1,5-Hexadiene, 98% 592-42-7
Chloroiodomethane, 98% 593-71-5
Lithium Bromide, Anhydrous, 99+% 7550-35-8
Lithium Carbonate, 99.999% 554-13-2
Lithium Carbonate, Reagent ACS (Powder), 99+% (Titr.) 554-13-2
Lithium Chloride, Anhydrous, 99% 7447-41-8
Lithium Fluoride, 99.98% 7789-24-4
Thiophenol, 97% 108-98-5
2-Chloropropane, 96% 75-29-6
Magnesium, turnings, 99.9+% 7439-95-4
Magnesium Acetate Tetrahydrate, Pure, Crystalline 16674-78-5
Magnesium Acetate Tetrahydrate, Reagent ACS (Crystals) 16674-78-5
Magnesium Chloride Hexahydrate, 99% 7791-18-6
Wright stain, high purity biological stain 67-56-1
Magnesium Chloride, Hexahydrate, U.S.P./ N.F. (Crystals) 7791-18-6
1-Bromooctane, 99% 111-83-1
4-Chloropyridine Hydrochloride, 97% 7379-35-3
Magnesium nitrate hexahydrate p.a. 13446-18-9
Magnesium Oxide, 98% (CA 40 Mesh) 1309-48-4
Magnesium Oxide, 98%, Powder 1309-48-4
Magnesium Oxide, Reagent ACS (Powder) 1309-48-4
Magnesium Oxide, 99.99% 1309-48-4
Magnesium Sulfate, Dried, Pure 7487-88-9
2-Chloro-4-hydroxybenzoic acid,98% (titr.) 56363-84-9
Guanidine carbonate, 99+% 593-85-1
Magnesium sulfate heptahydrate, C.P. 7487-88-9
Magnesium sulfate heptahydrate, Reagent ACS (Crystals) 7487-88-9
2-Aminobenzimidazole, 99+% (titr.) 934-32-7
Manganese(IV) Oxide, 99.999% 1313-13-9
Manganese(IV) Oxide, 80-85%, Powder 1313-13-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net