Search   
MSDS 
:
 4-Chloropyridine Hydrochloride, 97%
CAS 
:
 7379-35-3
SYNONYMS 
:
 4-Chloropyridinium Chloride
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7379-35-3 |4-Chloropyridine Hydrochloride | 97 | 230-946-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and skin.The toxicological properties of this
material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation. Wash clothing before reuse.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7379-35-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: light yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Sublimes
Freezing/Melting Point: 210 deg C
Autoignition Temperature: 525 deg C ( 977.00 deg F)
Flash Point: 198 deg C ( 388.40 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature: >213 deg C
Solubility in water: soluble
Specific Gravity/Density:
Molecular Formula: C5H4ClN.HCl
Molecular Weight: 150.01

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, irritating and
toxic fumes and gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7379-35-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Chloropyridine Hydrochloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: II
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: II
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 27 Take off immediately all contaminated clothing.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7379-35-3: No information available.
Canada
CAS# 7379-35-3 is listed on Canada's NDSL List.
CAS# 7379-35-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7379-35-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/30/1998 Revision #3 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Lanthanum(III) nitrate hexahydrate, 99.999% 10099-59-9
Methyl vinyl ketone, ca. 95%, stabilized with ca. 0.5% CH3CN, 0.5% 64-19-7
Lead, Powder, -325 Mesh, 99+% 7439-92-1
Triethoxyvinylsilane, 97% 78-08-0
2-Methylhexanoic Acid, 98% 4536-23-6
Lead(II) Acetate Trihydrate, P.A. 6080-56-4
1-Dodecanethiol 112-55-0
Lead (II) Nitrate, P.A. 10099-74-8
Lead subacetate, basic, reagent ACS, powder (for sugar analysis) 1335-32-6
Tetrabutylammonium perchlorate, contains max. 10% water, 99% 1923-70-2
3-Methyl-4-Nitrobenzyl Alcohol , 98% 80866-75-7
Light Green SF, Yellowish, High Purity Biological Stain 5141-20-8
Petroleum Ether, Boiling Range 40-65 Degr. C., P.A. 8032-32-4
Ligroine 8032-32-4
Ligroine, boiling range 90 - 110 degree C 8032-32-4
Petroleum Ether, Reagent ACS 8032-32-4
Petroleum Ether, Boiling Range 40-65 Degree C, C.P. 8032-32-4
Ligroine, boiling point 100-140 degree C 8032-32-4
Petroleum Ether, Boiling Range 80-110 Degree C, P.A. 8032-32-4
Petroleum Ether (Boiling Range 60-95), C.P. 8032-32-4
1,5-Hexadiene, 98% 592-42-7
Chloroiodomethane, 98% 593-71-5
Lithium Bromide, Anhydrous, 99+% 7550-35-8
Lithium Carbonate, 99.999% 554-13-2
Lithium Carbonate, Reagent ACS (Powder), 99+% (Titr.) 554-13-2
Lithium Chloride, Anhydrous, 99% 7447-41-8
Lithium Fluoride, 99.98% 7789-24-4
Thiophenol, 97% 108-98-5
2-Chloropropane, 96% 75-29-6
Magnesium, turnings, 99.9+% 7439-95-4
Magnesium Acetate Tetrahydrate, Pure, Crystalline 16674-78-5
Magnesium Acetate Tetrahydrate, Reagent ACS (Crystals) 16674-78-5
Magnesium Chloride Hexahydrate, 99% 7791-18-6
Wright stain, high purity biological stain 67-56-1
Magnesium Chloride, Hexahydrate, U.S.P./ N.F. (Crystals) 7791-18-6
1-Bromooctane, 99% 111-83-1
4-Chloropyridine Hydrochloride, 97% 7379-35-3
Magnesium nitrate hexahydrate p.a. 13446-18-9
Magnesium Oxide, 98% (CA 40 Mesh) 1309-48-4
Magnesium Oxide, 98%, Powder 1309-48-4
Magnesium Oxide, Reagent ACS (Powder) 1309-48-4
Magnesium Oxide, 99.99% 1309-48-4
Magnesium Sulfate, Dried, Pure 7487-88-9
2-Chloro-4-hydroxybenzoic acid,98% (titr.) 56363-84-9
Guanidine carbonate, 99+% 593-85-1
Magnesium sulfate heptahydrate, C.P. 7487-88-9
Magnesium sulfate heptahydrate, Reagent ACS (Crystals) 7487-88-9
2-Aminobenzimidazole, 99+% (titr.) 934-32-7
Manganese(IV) Oxide, 99.999% 1313-13-9
Manganese(IV) Oxide, 80-85%, Powder 1313-13-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net