Search   
MSDS 
:
 2-Chloropropane, 96%
CAS 
:
 75-29-6
SYNONYMS 
:
 N-Propyl Chloride
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 75-29-6 |2-CHLOROPROPANE | 96 | 200-858-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN F+
Risk Phrases: 11 20/21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Harmful by inhalation, in contact with skin and if
swallowed.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause liver and kidney damage. May cause nausea and
vomiting. Ingestion of large amounts may cause CNS depression.
Inhalation:
Inhalation of high concentrations may cause central nervous system
effects characterized by nausea, headache, dizziness, unconsciousness
and coma. May cause respiratory tract irritation. May cause liver and
kidney damage. Aspiration may lead to pulmonary edema. Vapors may
cause dizziness or suffocation. May cause burning sensation in the
chest.
Chronic:
May cause liver and kidney damage.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid if irritation develops or persists. Wash clothing
before reuse. Flush skin with plenty of soap and water.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
Containers can build up pressure if exposed to heat and/or fire. As
in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Will burn
if involved in a fire. Extremely flammable. Material will readily
ignite at room temperature. Use water spray to keep fire-exposed
containers cool. Water may be ineffective. Material is lighter than
water and a fire may be spread by the use of water. Flammable liquid
and vapor. Vapors may be heavier than air. They can spread along the
ground and collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 75-29-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: characteristic odor - chlorine-like
pH: Not available.
Vapor Pressure: 8.59psi @20C
Viscosity: Negligible.
Boiling Point: 34 - 36 deg C @ 760.00mm Hg
Freezing/Melting Point: -118 deg C
Autoignition Temperature: 590 deg C ( 1,094.00 deg F)
Flash Point: -32 deg C ( -25.60 deg F)
Explosion Limits, lower: 2.80 vol %
Explosion Limits, upper: 10.70 vol %
Decomposition Temperature:
Solubility in water: 3.1G/L (20C)
Specific Gravity/Density: .8590g/cm3
Molecular Formula: C3H7Cl
Molecular Weight: 78.54

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 75-29-6: TX4410000
LD50/LC50:
CAS# 75-29-6: Inhalation, mouse: LC50 = 119 gm/m3; Inhalation, rat:
LC50 = 120 gm/m3; Oral, mouse: LD50 = 1300 mg/kg; Oral, rat: LD50 =
5 gm/kg.
Carcinogenicity:
2-CHLOROPROPANE -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
For more information, see "HANDBOOK OF ENVIRONMENTAL FATE AND
EXPOSURE DATA."

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: 2-CHLOROPROPANE
Hazard Class: 3
UN Number: 2356
Packing Group: I
IMO
Shipping Name: 2-CHLOROPROPANE
Hazard Class: 3.1
UN Number: 2356
Packing Group: I
RID/ADR
Shipping Name: 2-CHLOROPROPANE
Hazard Class: 3
UN Number: 2356
Packing group: I

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN F+
Risk Phrases:
R 11 Highly flammable.
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 29 Do not empty into drains.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 75-29-6: 2
Canada
CAS# 75-29-6 is listed on Canada's DSL List.
CAS# 75-29-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 75-29-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Lanthanum(III) nitrate hexahydrate, 99.999% 10099-59-9
Methyl vinyl ketone, ca. 95%, stabilized with ca. 0.5% CH3CN, 0.5% 64-19-7
Lead, Powder, -325 Mesh, 99+% 7439-92-1
Triethoxyvinylsilane, 97% 78-08-0
2-Methylhexanoic Acid, 98% 4536-23-6
Lead(II) Acetate Trihydrate, P.A. 6080-56-4
1-Dodecanethiol 112-55-0
Lead (II) Nitrate, P.A. 10099-74-8
Lead subacetate, basic, reagent ACS, powder (for sugar analysis) 1335-32-6
Tetrabutylammonium perchlorate, contains max. 10% water, 99% 1923-70-2
3-Methyl-4-Nitrobenzyl Alcohol , 98% 80866-75-7
Light Green SF, Yellowish, High Purity Biological Stain 5141-20-8
Petroleum Ether, Boiling Range 40-65 Degr. C., P.A. 8032-32-4
Ligroine 8032-32-4
Ligroine, boiling range 90 - 110 degree C 8032-32-4
Petroleum Ether, Reagent ACS 8032-32-4
Petroleum Ether, Boiling Range 40-65 Degree C, C.P. 8032-32-4
Ligroine, boiling point 100-140 degree C 8032-32-4
Petroleum Ether, Boiling Range 80-110 Degree C, P.A. 8032-32-4
Petroleum Ether (Boiling Range 60-95), C.P. 8032-32-4
1,5-Hexadiene, 98% 592-42-7
Chloroiodomethane, 98% 593-71-5
Lithium Bromide, Anhydrous, 99+% 7550-35-8
Lithium Carbonate, 99.999% 554-13-2
Lithium Carbonate, Reagent ACS (Powder), 99+% (Titr.) 554-13-2
Lithium Chloride, Anhydrous, 99% 7447-41-8
Lithium Fluoride, 99.98% 7789-24-4
Thiophenol, 97% 108-98-5
2-Chloropropane, 96% 75-29-6
Magnesium, turnings, 99.9+% 7439-95-4
Magnesium Acetate Tetrahydrate, Pure, Crystalline 16674-78-5
Magnesium Acetate Tetrahydrate, Reagent ACS (Crystals) 16674-78-5
Magnesium Chloride Hexahydrate, 99% 7791-18-6
Wright stain, high purity biological stain 67-56-1
Magnesium Chloride, Hexahydrate, U.S.P./ N.F. (Crystals) 7791-18-6
1-Bromooctane, 99% 111-83-1
4-Chloropyridine Hydrochloride, 97% 7379-35-3
Magnesium nitrate hexahydrate p.a. 13446-18-9
Magnesium Oxide, 98% (CA 40 Mesh) 1309-48-4
Magnesium Oxide, 98%, Powder 1309-48-4
Magnesium Oxide, Reagent ACS (Powder) 1309-48-4
Magnesium Oxide, 99.99% 1309-48-4
Magnesium Sulfate, Dried, Pure 7487-88-9
2-Chloro-4-hydroxybenzoic acid,98% (titr.) 56363-84-9
Guanidine carbonate, 99+% 593-85-1
Magnesium sulfate heptahydrate, C.P. 7487-88-9
Magnesium sulfate heptahydrate, Reagent ACS (Crystals) 7487-88-9
2-Aminobenzimidazole, 99+% (titr.) 934-32-7
Manganese(IV) Oxide, 99.999% 1313-13-9
Manganese(IV) Oxide, 80-85%, Powder 1313-13-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net