Search   
MSDS 
:
 1-Dodecanethiol
CAS 
:
 112-55-0
SYNONYMS 
:
 Lauryl mercaptan; Dodecyl mercaptan; 1-Dodecyl mercaptan; n-Dodecyl     mercaptan.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 112-55-0 |1-Dodecanethiol | 98 | 203-984-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 37/38 41 43

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to respiratory system and skin. Risk of serious damage to
eyes. May cause sensitization by skin contact.

Potential Health Effects
Eye:
Causes severe eye irritation and possible injury.
Skin:
Causes skin irritation. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. May be harmful if inhaled.
Chronic:
Repeated exposure may cause sensitization dermatitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with soap and plenty of
water. Remove contaminated clothing and shoes. Get medical aid if
symptoms occur. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Combustible
liquid and vapor.
Extinguishing Media:
Use water fog, dry chemical, carbon dioxide, or regular foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Provide ventilation. Approach spill from upwind.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Keep away from heat
and flame. Avoid breathing vapor or mist. Do not get in eyes. Avoid
contact with skin and clothing.
Storage:
Keep away from sources of ignition. Store in a cool, dry place. Keep
container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels below recommended
exposure limits. Facilities storing or utilizing this material should
be equipped with an eyewash facility and a safety shower.
Exposure Limits
CAS# 112-55-0:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles and face shield.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless to light yellow
Odor: skunk-like - repulsive - stench - mild odor - malodo
pH: Not available.
Vapor Pressure: 2.5 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 266-283 deg C @ 760 mm Hg
Freezing/Melting Point: -7 deg C
Autoignition Temperature: 230 deg C ( 446.00 deg F)
Flash Point: 87 deg C ( 188.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 350 deg C
Solubility in water: Insoluble.
Specific Gravity/Density: .8450 g/ml @ 20C
Molecular Formula: C12H26S
Molecular Weight: 202.40

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources, excess heat, confined spaces.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen sulfide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 112-55-0: JR3155000
LD50/LC50:
Not available.
Carcinogenicity:
1-Dodecanethiol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 37/38 Irritating to respiratory system and skin.
R 41 Risk of serious damage to eyes.
R 43 May cause sensitization by skin contact.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 112-55-0: No information available.
Canada
CAS# 112-55-0 is listed on Canada's DSL List.
CAS# 112-55-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 112-55-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1998 Revision #3 Date: 1/25/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Lanthanum(III) nitrate hexahydrate, 99.999% 10099-59-9
Methyl vinyl ketone, ca. 95%, stabilized with ca. 0.5% CH3CN, 0.5% 64-19-7
Lead, Powder, -325 Mesh, 99+% 7439-92-1
Triethoxyvinylsilane, 97% 78-08-0
2-Methylhexanoic Acid, 98% 4536-23-6
Lead(II) Acetate Trihydrate, P.A. 6080-56-4
1-Dodecanethiol 112-55-0
Lead (II) Nitrate, P.A. 10099-74-8
Lead subacetate, basic, reagent ACS, powder (for sugar analysis) 1335-32-6
Tetrabutylammonium perchlorate, contains max. 10% water, 99% 1923-70-2
3-Methyl-4-Nitrobenzyl Alcohol , 98% 80866-75-7
Light Green SF, Yellowish, High Purity Biological Stain 5141-20-8
Petroleum Ether, Boiling Range 40-65 Degr. C., P.A. 8032-32-4
Ligroine 8032-32-4
Ligroine, boiling range 90 - 110 degree C 8032-32-4
Petroleum Ether, Reagent ACS 8032-32-4
Petroleum Ether, Boiling Range 40-65 Degree C, C.P. 8032-32-4
Ligroine, boiling point 100-140 degree C 8032-32-4
Petroleum Ether, Boiling Range 80-110 Degree C, P.A. 8032-32-4
Petroleum Ether (Boiling Range 60-95), C.P. 8032-32-4
1,5-Hexadiene, 98% 592-42-7
Chloroiodomethane, 98% 593-71-5
Lithium Bromide, Anhydrous, 99+% 7550-35-8
Lithium Carbonate, 99.999% 554-13-2
Lithium Carbonate, Reagent ACS (Powder), 99+% (Titr.) 554-13-2
Lithium Chloride, Anhydrous, 99% 7447-41-8
Lithium Fluoride, 99.98% 7789-24-4
Thiophenol, 97% 108-98-5
2-Chloropropane, 96% 75-29-6
Magnesium, turnings, 99.9+% 7439-95-4
Magnesium Acetate Tetrahydrate, Pure, Crystalline 16674-78-5
Magnesium Acetate Tetrahydrate, Reagent ACS (Crystals) 16674-78-5
Magnesium Chloride Hexahydrate, 99% 7791-18-6
Wright stain, high purity biological stain 67-56-1
Magnesium Chloride, Hexahydrate, U.S.P./ N.F. (Crystals) 7791-18-6
1-Bromooctane, 99% 111-83-1
4-Chloropyridine Hydrochloride, 97% 7379-35-3
Magnesium nitrate hexahydrate p.a. 13446-18-9
Magnesium Oxide, 98% (CA 40 Mesh) 1309-48-4
Magnesium Oxide, 98%, Powder 1309-48-4
Magnesium Oxide, Reagent ACS (Powder) 1309-48-4
Magnesium Oxide, 99.99% 1309-48-4
Magnesium Sulfate, Dried, Pure 7487-88-9
2-Chloro-4-hydroxybenzoic acid,98% (titr.) 56363-84-9
Guanidine carbonate, 99+% 593-85-1
Magnesium sulfate heptahydrate, C.P. 7487-88-9
Magnesium sulfate heptahydrate, Reagent ACS (Crystals) 7487-88-9
2-Aminobenzimidazole, 99+% (titr.) 934-32-7
Manganese(IV) Oxide, 99.999% 1313-13-9
Manganese(IV) Oxide, 80-85%, Powder 1313-13-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net