Search   
MSDS 
:
 Tetrabutylammonium perchlorate, contains max. 10% water, 99%
CAS 
:
 1923-70-2
SYNONYMS 
:
 1-Butanaminium, N,N,N-Tributyl-, Perchlorate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 1923-70-2 |Tetrabutylammonium perchlorate | >90 | 217-655-5 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | <10 | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: O
Risk Phrases: 8

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Contact with combustible material may cause fire.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
May cause an allergic reaction in certain individuals.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated. May be
harmful if swallowed.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. May be harmful if
inhaled.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Strong oxidizer. Contact with other material may
cause fire. During a fire, irritating and highly toxic gases may be
generated by thermal decomposition or combustion. Use water spray to
keep fire-exposed containers cool. Use water with caution and in
flooding amounts. Containers may explode when heated. Explosive
decomposition may occur under fire conditions.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Contact professional
fire-fighters immediately. Cool containers with flooding quantities
of water until well after fire is out. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Remove all sources of ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid contact with clothing
and other combustible materials. Avoid ingestion and inhalation.
Storage:
Keep away from heat, sparks, and flame. Do not store near
combustible materials. Store in a tightly closed container. Store in
a cool, dry, well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1923-70-2:

CAS# 7732-18-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear a chemical apron. Wear appropriate protective
clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white to off-white
Odor: ammonia-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 210 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 290 deg C
Solubility in water: Slightly soluble.
Specific Gravity/Density:
Molecular Formula: C16H36ClNO4
Molecular Weight: 341.91

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. May violently
decompose at temperatures above 190C.
Conditions to Avoid:
Ignition sources, dust generation, heat.
Incompatibilities with Other Materials:
Reducing agents, organic materials, combustible materials.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of nitrogen, irritating
and toxic fumes and gases, carbon dioxide, amines.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1923-70-2 unlisted.
CAS# 7732-18-5: ZC0110000
LD50/LC50:
Not available.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
Tetrabutylammonium perchlorate -
Not listed by ACGIH, IARC, or NTP.
Water -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: OXIDIZING SOLID, N.O.S.
Hazard Class: 5.1
UN Number: 1479
Packing Group: II
IMO
Shipping Name: OXIDIZING SOLID, N.O.S.
Hazard Class: 5.1
UN Number: 1479
Packing Group: II
RID/ADR
Shipping Name: OXIDIZING SOLID, N.O.S.
Hazard Class: 5.1
UN Number: 1479
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: O
Risk Phrases:
R 8 Contact with combustible material may cause
fire.
Safety Phrases:
S 17 Keep away from combustible material.
WGK (Water Danger/Protection)
CAS# 1923-70-2: No information available.
CAS# 7732-18-5: No information available.
Canada
CAS# 1923-70-2 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 1923-70-2 is not listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1923-70-2 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
R 36/37/38 Irritating to eyes, respiratory system and
skin.
R 5 Heating may cause an explosion.
R 8 Contact with combustible material may cause fire.
MSDS Creation Date: 5/26/1999 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Lanthanum(III) nitrate hexahydrate, 99.999% 10099-59-9
Methyl vinyl ketone, ca. 95%, stabilized with ca. 0.5% CH3CN, 0.5% 64-19-7
Lead, Powder, -325 Mesh, 99+% 7439-92-1
Triethoxyvinylsilane, 97% 78-08-0
2-Methylhexanoic Acid, 98% 4536-23-6
Lead(II) Acetate Trihydrate, P.A. 6080-56-4
1-Dodecanethiol 112-55-0
Lead (II) Nitrate, P.A. 10099-74-8
Lead subacetate, basic, reagent ACS, powder (for sugar analysis) 1335-32-6
Tetrabutylammonium perchlorate, contains max. 10% water, 99% 1923-70-2
3-Methyl-4-Nitrobenzyl Alcohol , 98% 80866-75-7
Light Green SF, Yellowish, High Purity Biological Stain 5141-20-8
Petroleum Ether, Boiling Range 40-65 Degr. C., P.A. 8032-32-4
Ligroine 8032-32-4
Ligroine, boiling range 90 - 110 degree C 8032-32-4
Petroleum Ether, Reagent ACS 8032-32-4
Petroleum Ether, Boiling Range 40-65 Degree C, C.P. 8032-32-4
Ligroine, boiling point 100-140 degree C 8032-32-4
Petroleum Ether, Boiling Range 80-110 Degree C, P.A. 8032-32-4
Petroleum Ether (Boiling Range 60-95), C.P. 8032-32-4
1,5-Hexadiene, 98% 592-42-7
Chloroiodomethane, 98% 593-71-5
Lithium Bromide, Anhydrous, 99+% 7550-35-8
Lithium Carbonate, 99.999% 554-13-2
Lithium Carbonate, Reagent ACS (Powder), 99+% (Titr.) 554-13-2
Lithium Chloride, Anhydrous, 99% 7447-41-8
Lithium Fluoride, 99.98% 7789-24-4
Thiophenol, 97% 108-98-5
2-Chloropropane, 96% 75-29-6
Magnesium, turnings, 99.9+% 7439-95-4
Magnesium Acetate Tetrahydrate, Pure, Crystalline 16674-78-5
Magnesium Acetate Tetrahydrate, Reagent ACS (Crystals) 16674-78-5
Magnesium Chloride Hexahydrate, 99% 7791-18-6
Wright stain, high purity biological stain 67-56-1
Magnesium Chloride, Hexahydrate, U.S.P./ N.F. (Crystals) 7791-18-6
1-Bromooctane, 99% 111-83-1
4-Chloropyridine Hydrochloride, 97% 7379-35-3
Magnesium nitrate hexahydrate p.a. 13446-18-9
Magnesium Oxide, 98% (CA 40 Mesh) 1309-48-4
Magnesium Oxide, 98%, Powder 1309-48-4
Magnesium Oxide, Reagent ACS (Powder) 1309-48-4
Magnesium Oxide, 99.99% 1309-48-4
Magnesium Sulfate, Dried, Pure 7487-88-9
2-Chloro-4-hydroxybenzoic acid,98% (titr.) 56363-84-9
Guanidine carbonate, 99+% 593-85-1
Magnesium sulfate heptahydrate, C.P. 7487-88-9
Magnesium sulfate heptahydrate, Reagent ACS (Crystals) 7487-88-9
2-Aminobenzimidazole, 99+% (titr.) 934-32-7
Manganese(IV) Oxide, 99.999% 1313-13-9
Manganese(IV) Oxide, 80-85%, Powder 1313-13-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net