Search   
MSDS 
:
 Methyl stearate, 95% (gc)
CAS 
:
 112-61-8
SYNONYMS 
:
 Methyl Octadecanoate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 112-61-8 |Methyl stearate | 98.0 | 203-990-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Do NOT induce vomiting. If conscious and alert, rinse mouth and drink
2-4 cupfuls of milk or water. Get medical aid if irritation or
symptoms occur.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Water or foam may cause frothing. In case of fire, use carbon
dioxide or dry chemical.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Avoid ingestion and
inhalation. Use with adequate ventilation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Always use
a NIOSH or European Standard EN 149 approved
respirator when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 36 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density: .8360g/cm3
Molecular Formula: C19H38O2
Molecular Weight: 298.51

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, acrid smoke and fumes.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 112-61-8: WI4460000
LD50/LC50:
Not available.
Carcinogenicity:
Methyl stearate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 112-61-8: 1
United Kingdom Occupational Exposure Limits

United Kingdom Maximum Exposure Limits

Canada
CAS# 112-61-8 is listed on Canada's DSL List.
CAS# 112-61-8 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 112-61-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/17/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Heptafluorobutyryl chloride, 98% 375-16-6
(3-(Heptafluoroisopropoxy)propyl)trichloro silane, 97% 15538-93-9
Hexafluoroacetone trihydrate, 98% 34202-69-2
Fluoroantimonic acid hexahydrate, 98% 72121-43-8
Hexafluoro-2-butyne, 99% 692-50-2
4,4'-(Hexafluoroisopropylidene)diphthalic anhydride, 99% 1107-00-2
HEXAFLUOROPROPENE, 99+% 116-15-4
Hexafluoropropene, trimer 6792-31-0
Iodopentafluorobenzene, 99% 827-15-6
(r)-(+)-alpha-Methoxy-alpha-(trifluorometh yl)phenyl acetic acid, 99% 20445-31-2
Methyl pentafluorobenzoate, 99% 36629-42-2
Alpha-Methyl-4-(Trifluoromethyl)benzyl Alcohol, Tech., 90% 1737-26-4
Nickel(ii) fluoride, 99% 10028-18-9
Nitronium hexafluoroantimonate(v) 17856-92-7
2,2,3,3,4,4,5,5-Octafluoro-1-pentanol, 98% 355-80-6
Methyl stearate, 95% (gc) 112-61-8
Pentafluoronitrobenzene, 98% 880-78-4
Perfluoro-1-butanesulfonyl fluoride, 92% 375-72-4
Perfluorododecyl iodide, 97% 307-60-8
Allyl 1,1,2,2-tetrafluoroethyl ether, 99% 1428-33-7
3,3,4,4,5,5,6,6,6-Nonafluoro-1-hexene, 97% 19430-93-4
N-Methyliminodiacetic acid, 99% 4408-64-4
Perfluoro-2-methyl-2-pentene, 90% 1584-03-8
Perfluoro-1-octanesulfonyl fluoride, 95% 307-35-7
3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluoro-1- octanol, 97% 647-42-7
1,1,1,2,2,3,3,4,4,5,5,6,6-Tridecafluoro-8- iodooctane, 97% 2043-57-4
alpha-(Trifluoromethyl)benzyl alcohol, 99% 340-05-6
Potassium nickel(iv)fluoride, 99% 17218-47-2
Rubidium fluoride, 99.8% 13446-74-7
Silicon tetrafluoride 7783-61-1
Silver hexafluoroantimonate, 98% 26042-64-8
Sodium Hexafluoroarsenate(v), 99% 12005-86-6
Pentafluoropropionic acid, sodium salt, 98 % 378-77-8
Tin (II) Trifluoromethanesulfonate, 97% 62086-04-8
Tetrabutylammonium trifluoromethanesulfonate, 99% 35895-70-6
1,4-Bis(trimethylsilyl)-1,3-butadiyne, 98% 4526-07-2
Nitrosonium tetrafluoroborate 14635-75-7
6-Chloro-2-benzoxazolethiol, 99% 22876-20-6
2-(N-BOC-Amino)-5-(N-FMOC-amino)indan-2-carboxylic acid
Holmium(III) nitrate pentahydrate, 99.9% 14483-18-2
Lithium Methoxide, 1.0M Solution in Methyl Alcohol 67-56-1
Fluorophosphoric Acid, 70% 13537-32-1
Titanium(IV) Ethoxide, Tech. 3087-36-3
Thallium(I) fluoride, 99% 7789-27-7
(3-Chloroproyl)trimethoxysilane, 97% 2530-87-2
Cadmium Nitrate Tetrahydrate, 98% 10022-68-1
Neodymium(III) Chloride, Anhydrous, 99.9% 10024-93-8
Strontium chloride hexahydrate, reagent A.C.S., 99% 10025-70-4
Dysprosium(III) Chloride, Anhydrous, 99.9% 10025-74-8
Europium(III) Chloride, Anhydrous, 99.9% 10025-76-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net