Search   
MSDS 
:
 6-Chloro-2-benzoxazolethiol, 99%
CAS 
:
 22876-20-6
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 22876-20-6 |6-Chloro-2-benzoxazolethiol | 99 | 245-282-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam. Use
agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid breathing dust,
vapor, mist, or gas. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 22876-20-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 201 - 204 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C7H4ClNOS
Molecular Weight: 185.63

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, oxides of
sulfur, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 22876-20-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
6-Chloro-2-benzoxazolethiol -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 22876-20-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 22876-20-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 22876-20-6 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/08/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Heptafluorobutyryl chloride, 98% 375-16-6
(3-(Heptafluoroisopropoxy)propyl)trichloro silane, 97% 15538-93-9
Hexafluoroacetone trihydrate, 98% 34202-69-2
Fluoroantimonic acid hexahydrate, 98% 72121-43-8
Hexafluoro-2-butyne, 99% 692-50-2
4,4'-(Hexafluoroisopropylidene)diphthalic anhydride, 99% 1107-00-2
HEXAFLUOROPROPENE, 99+% 116-15-4
Hexafluoropropene, trimer 6792-31-0
Iodopentafluorobenzene, 99% 827-15-6
(r)-(+)-alpha-Methoxy-alpha-(trifluorometh yl)phenyl acetic acid, 99% 20445-31-2
Methyl pentafluorobenzoate, 99% 36629-42-2
Alpha-Methyl-4-(Trifluoromethyl)benzyl Alcohol, Tech., 90% 1737-26-4
Nickel(ii) fluoride, 99% 10028-18-9
Nitronium hexafluoroantimonate(v) 17856-92-7
2,2,3,3,4,4,5,5-Octafluoro-1-pentanol, 98% 355-80-6
Methyl stearate, 95% (gc) 112-61-8
Pentafluoronitrobenzene, 98% 880-78-4
Perfluoro-1-butanesulfonyl fluoride, 92% 375-72-4
Perfluorododecyl iodide, 97% 307-60-8
Allyl 1,1,2,2-tetrafluoroethyl ether, 99% 1428-33-7
3,3,4,4,5,5,6,6,6-Nonafluoro-1-hexene, 97% 19430-93-4
N-Methyliminodiacetic acid, 99% 4408-64-4
Perfluoro-2-methyl-2-pentene, 90% 1584-03-8
Perfluoro-1-octanesulfonyl fluoride, 95% 307-35-7
3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluoro-1- octanol, 97% 647-42-7
1,1,1,2,2,3,3,4,4,5,5,6,6-Tridecafluoro-8- iodooctane, 97% 2043-57-4
alpha-(Trifluoromethyl)benzyl alcohol, 99% 340-05-6
Potassium nickel(iv)fluoride, 99% 17218-47-2
Rubidium fluoride, 99.8% 13446-74-7
Silicon tetrafluoride 7783-61-1
Silver hexafluoroantimonate, 98% 26042-64-8
Sodium Hexafluoroarsenate(v), 99% 12005-86-6
Pentafluoropropionic acid, sodium salt, 98 % 378-77-8
Tin (II) Trifluoromethanesulfonate, 97% 62086-04-8
Tetrabutylammonium trifluoromethanesulfonate, 99% 35895-70-6
1,4-Bis(trimethylsilyl)-1,3-butadiyne, 98% 4526-07-2
Nitrosonium tetrafluoroborate 14635-75-7
6-Chloro-2-benzoxazolethiol, 99% 22876-20-6
2-(N-BOC-Amino)-5-(N-FMOC-amino)indan-2-carboxylic acid
Holmium(III) nitrate pentahydrate, 99.9% 14483-18-2
Lithium Methoxide, 1.0M Solution in Methyl Alcohol 67-56-1
Fluorophosphoric Acid, 70% 13537-32-1
Titanium(IV) Ethoxide, Tech. 3087-36-3
Thallium(I) fluoride, 99% 7789-27-7
(3-Chloroproyl)trimethoxysilane, 97% 2530-87-2
Cadmium Nitrate Tetrahydrate, 98% 10022-68-1
Neodymium(III) Chloride, Anhydrous, 99.9% 10024-93-8
Strontium chloride hexahydrate, reagent A.C.S., 99% 10025-70-4
Dysprosium(III) Chloride, Anhydrous, 99.9% 10025-74-8
Europium(III) Chloride, Anhydrous, 99.9% 10025-76-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net