Search   
MSDS 
:
 3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluoro-1- octanol, 97%
CAS 
:
 647-42-7
SYNONYMS 
:
 1H,1H,2H,2H-Perfluorooctan-1-ol
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 647-42-7 |3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluor| 97.0 | 211-477-1 |
| |o-1-octanol, 97% | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
Causes irritation of the mucous membrane.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Use water spray to keep fire-exposed containers
cool. Combustible liquid. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas.
Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Use a spark-proof tool.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Empty containers retain product residue, (liquid and/or vapor), and
can be dangerous. Keep container tightly closed. Keep away from
heat, sparks and flame. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose empty containers to heat, sparks or open
flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 647-42-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 88 - 95 deg C @ 28.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 91 deg C ( 195.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.6510g/cm3
Molecular Formula: C8H5F13O
Molecular Weight: 364.11

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stability unknown.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 647-42-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluoro-1-octanol, 97% -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 647-42-7: No information available.
Canada
CAS# 647-42-7 is listed on Canada's DSL List.
CAS# 647-42-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 647-42-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/12/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Heptafluorobutyryl chloride, 98% 375-16-6
(3-(Heptafluoroisopropoxy)propyl)trichloro silane, 97% 15538-93-9
Hexafluoroacetone trihydrate, 98% 34202-69-2
Fluoroantimonic acid hexahydrate, 98% 72121-43-8
Hexafluoro-2-butyne, 99% 692-50-2
4,4'-(Hexafluoroisopropylidene)diphthalic anhydride, 99% 1107-00-2
HEXAFLUOROPROPENE, 99+% 116-15-4
Hexafluoropropene, trimer 6792-31-0
Iodopentafluorobenzene, 99% 827-15-6
(r)-(+)-alpha-Methoxy-alpha-(trifluorometh yl)phenyl acetic acid, 99% 20445-31-2
Methyl pentafluorobenzoate, 99% 36629-42-2
Alpha-Methyl-4-(Trifluoromethyl)benzyl Alcohol, Tech., 90% 1737-26-4
Nickel(ii) fluoride, 99% 10028-18-9
Nitronium hexafluoroantimonate(v) 17856-92-7
2,2,3,3,4,4,5,5-Octafluoro-1-pentanol, 98% 355-80-6
Methyl stearate, 95% (gc) 112-61-8
Pentafluoronitrobenzene, 98% 880-78-4
Perfluoro-1-butanesulfonyl fluoride, 92% 375-72-4
Perfluorododecyl iodide, 97% 307-60-8
Allyl 1,1,2,2-tetrafluoroethyl ether, 99% 1428-33-7
3,3,4,4,5,5,6,6,6-Nonafluoro-1-hexene, 97% 19430-93-4
N-Methyliminodiacetic acid, 99% 4408-64-4
Perfluoro-2-methyl-2-pentene, 90% 1584-03-8
Perfluoro-1-octanesulfonyl fluoride, 95% 307-35-7
3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluoro-1- octanol, 97% 647-42-7
1,1,1,2,2,3,3,4,4,5,5,6,6-Tridecafluoro-8- iodooctane, 97% 2043-57-4
alpha-(Trifluoromethyl)benzyl alcohol, 99% 340-05-6
Potassium nickel(iv)fluoride, 99% 17218-47-2
Rubidium fluoride, 99.8% 13446-74-7
Silicon tetrafluoride 7783-61-1
Silver hexafluoroantimonate, 98% 26042-64-8
Sodium Hexafluoroarsenate(v), 99% 12005-86-6
Pentafluoropropionic acid, sodium salt, 98 % 378-77-8
Tin (II) Trifluoromethanesulfonate, 97% 62086-04-8
Tetrabutylammonium trifluoromethanesulfonate, 99% 35895-70-6
1,4-Bis(trimethylsilyl)-1,3-butadiyne, 98% 4526-07-2
Nitrosonium tetrafluoroborate 14635-75-7
6-Chloro-2-benzoxazolethiol, 99% 22876-20-6
2-(N-BOC-Amino)-5-(N-FMOC-amino)indan-2-carboxylic acid
Holmium(III) nitrate pentahydrate, 99.9% 14483-18-2
Lithium Methoxide, 1.0M Solution in Methyl Alcohol 67-56-1
Fluorophosphoric Acid, 70% 13537-32-1
Titanium(IV) Ethoxide, Tech. 3087-36-3
Thallium(I) fluoride, 99% 7789-27-7
(3-Chloroproyl)trimethoxysilane, 97% 2530-87-2
Cadmium Nitrate Tetrahydrate, 98% 10022-68-1
Neodymium(III) Chloride, Anhydrous, 99.9% 10024-93-8
Strontium chloride hexahydrate, reagent A.C.S., 99% 10025-70-4
Dysprosium(III) Chloride, Anhydrous, 99.9% 10025-74-8
Europium(III) Chloride, Anhydrous, 99.9% 10025-76-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net