Search   
MSDS 
:
 Fluorophosphoric Acid, 70%
CAS 
:
 13537-32-1
SYNONYMS 
:
 Monofluorophosphoric Acid; Phosphorofluoridic Acid.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 13537-32-1 |Fluorophosphoric Acid | 70% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 23/24/25 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic by inhalation, in contact with skin and if swallowed. Causes
burns.Hygroscopic (absorbs moisture from the air).Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. The toxicological properties of this substance have not been
fully investigated. May cause systemic effects.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. Causes chemical burns to the respiratory tract.
Inhalation may be fatal as a result of spasm, inflammation, edema of
the larynx and bronchi, chemical pneumonitis and pulmonary edema.
Aspiration may lead to pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately. Wash mouth out
with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Vapors may be heavier
than air. They can spread along the ground and collect in low or
confined areas. Containers may explode when heated.
Extinguishing Media:
Use dry chemical. Cool containers with flooding quantities of water
until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Keep container tightly closed. Do not get on skin or in eyes. Do not
ingest or inhale. Use with adequate ventilation. Use and store under
nitrogen. Use only in a chemical fume hood. Discard contaminated
shoes.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 13537-32-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: pungent odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: None.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density: 1.8300g/cm3
Molecular Formula: H2PO3F
Molecular Weight: 99.99

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, moisture, excess heat, exposure to moist air
or water.
Incompatibilities with Other Materials:
Moisture, strong bases, strong oxidizing agents.
Hazardous Decomposition Products:
Phosphine, irritating and toxic fumes and gases, hydrogen fluoride
gas.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 13537-32-1: TE5000000
LD50/LC50:
Not available.
Carcinogenicity:
Fluorophosphoric Acid -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLUOROPHOSPHORIC ACID, ANHYDROUS
Hazard Class: 8
UN Number: 1776
Packing Group: II
IMO
Shipping Name: FLUOROPHOSPHORIC ACID, ANHYDROUS
Hazard Class: 8
UN Number: 1776
Packing Group: II
RID/ADR
Shipping Name: FLUOROPHOSPHORIC ACID, ANHYDROUS
Hazard Class: 8
UN Number: 1776
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 23/24/25 Toxic by inhalation, in contact with skin
and if swallowed.
R 34 Causes burns.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 38 In case of insufficient ventilation, wear
suitable respiratory equipment.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 13537-32-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 13537-32-1 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13537-32-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/14/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Heptafluorobutyryl chloride, 98% 375-16-6
(3-(Heptafluoroisopropoxy)propyl)trichloro silane, 97% 15538-93-9
Hexafluoroacetone trihydrate, 98% 34202-69-2
Fluoroantimonic acid hexahydrate, 98% 72121-43-8
Hexafluoro-2-butyne, 99% 692-50-2
4,4'-(Hexafluoroisopropylidene)diphthalic anhydride, 99% 1107-00-2
HEXAFLUOROPROPENE, 99+% 116-15-4
Hexafluoropropene, trimer 6792-31-0
Iodopentafluorobenzene, 99% 827-15-6
(r)-(+)-alpha-Methoxy-alpha-(trifluorometh yl)phenyl acetic acid, 99% 20445-31-2
Methyl pentafluorobenzoate, 99% 36629-42-2
Alpha-Methyl-4-(Trifluoromethyl)benzyl Alcohol, Tech., 90% 1737-26-4
Nickel(ii) fluoride, 99% 10028-18-9
Nitronium hexafluoroantimonate(v) 17856-92-7
2,2,3,3,4,4,5,5-Octafluoro-1-pentanol, 98% 355-80-6
Methyl stearate, 95% (gc) 112-61-8
Pentafluoronitrobenzene, 98% 880-78-4
Perfluoro-1-butanesulfonyl fluoride, 92% 375-72-4
Perfluorododecyl iodide, 97% 307-60-8
Allyl 1,1,2,2-tetrafluoroethyl ether, 99% 1428-33-7
3,3,4,4,5,5,6,6,6-Nonafluoro-1-hexene, 97% 19430-93-4
N-Methyliminodiacetic acid, 99% 4408-64-4
Perfluoro-2-methyl-2-pentene, 90% 1584-03-8
Perfluoro-1-octanesulfonyl fluoride, 95% 307-35-7
3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluoro-1- octanol, 97% 647-42-7
1,1,1,2,2,3,3,4,4,5,5,6,6-Tridecafluoro-8- iodooctane, 97% 2043-57-4
alpha-(Trifluoromethyl)benzyl alcohol, 99% 340-05-6
Potassium nickel(iv)fluoride, 99% 17218-47-2
Rubidium fluoride, 99.8% 13446-74-7
Silicon tetrafluoride 7783-61-1
Silver hexafluoroantimonate, 98% 26042-64-8
Sodium Hexafluoroarsenate(v), 99% 12005-86-6
Pentafluoropropionic acid, sodium salt, 98 % 378-77-8
Tin (II) Trifluoromethanesulfonate, 97% 62086-04-8
Tetrabutylammonium trifluoromethanesulfonate, 99% 35895-70-6
1,4-Bis(trimethylsilyl)-1,3-butadiyne, 98% 4526-07-2
Nitrosonium tetrafluoroborate 14635-75-7
6-Chloro-2-benzoxazolethiol, 99% 22876-20-6
2-(N-BOC-Amino)-5-(N-FMOC-amino)indan-2-carboxylic acid
Holmium(III) nitrate pentahydrate, 99.9% 14483-18-2
Lithium Methoxide, 1.0M Solution in Methyl Alcohol 67-56-1
Fluorophosphoric Acid, 70% 13537-32-1
Titanium(IV) Ethoxide, Tech. 3087-36-3
Thallium(I) fluoride, 99% 7789-27-7
(3-Chloroproyl)trimethoxysilane, 97% 2530-87-2
Cadmium Nitrate Tetrahydrate, 98% 10022-68-1
Neodymium(III) Chloride, Anhydrous, 99.9% 10024-93-8
Strontium chloride hexahydrate, reagent A.C.S., 99% 10025-70-4
Dysprosium(III) Chloride, Anhydrous, 99.9% 10025-74-8
Europium(III) Chloride, Anhydrous, 99.9% 10025-76-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net