Search   
MSDS 
:
 Anisaldehyde
CAS 
:
 123-11-5
SYNONYMS 
:
 4-Methoxybenzaldehyde; Anisic aldehyde; p-Methoxybenzaldehyde;     p-Formylanisole.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 123-11-5 |p-Anisaldehyde | > 98 | 204-602-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Irritating to eyes, respiratory system and
skin.Air sensitive.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Prolonged or repeated contact may
dry/defat the skin and cause irritation.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Laboratory experiments have resulted in mutagenic effects.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Avoid breathing vapor or mist.
Storage:
Do not store in direct sunlight. Keep container closed when not in
use. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Storage under
a nitrogen blanket has been recommended.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 123-11-5:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless to slight yellow
Odor: sweetish odor
pH: Not available.
Vapor Pressure: 3.29E-002 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 248 - 249 deg C @ 760mmHg
Freezing/Melting Point: -1 deg C
Autoignition Temperature: 225 deg C ( 437.00 deg F)
Flash Point: 116 deg C ( 240.80 deg F)
Explosion Limits, lower: 1.4 vol %
Explosion Limits, upper: 5.3 vol %
Decomposition Temperature: >160 deg C
Solubility in water: Insoluble.
Specific Gravity/Density: 1.1190g/cm3
Molecular Formula: C8H8O2
Molecular Weight: 136.15

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Prolonged exposure to air.
Incompatibilities with Other Materials:
Strong bases, strong oxidizing agents, strong reducing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 123-11-5: BZ2625000
LD50/LC50:
CAS# 123-11-5: Draize test, rabbit, skin: 500 mg/24H Moderate; Oral,
mouse: LD50 = 1859 mg/kg; Oral, mouse: LD50 = 1858.6 mg/kg; Oral,
rat: LD50 = 1510 mg/kg; Oral, rat: LD50 = 1847.8 mg/kg; Skin, rabbit:
LD50 = >5 gm/kg.
Carcinogenicity:
p-Anisaldehyde -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 123-11-5: 1
Canada
CAS# 123-11-5 is listed on Canada's DSL List.
CAS# 123-11-5 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 123-11-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/12/1997 Revision #4 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
EcoSafe 0-00-0
2'-Deoxyuridine, 99+% 951-78-0
OptiFlow Safe 0-00-0
Acetonitrile, HPLC grade, 99.9% 75-05-8
N-Methyloctylamine, 85% 2439-54-5
3-Bromopyruvic Acid Hydrate, 98% 1113-59-3
Nessler's Reagent 1310-73-2
Tris Buffer Solution 1.0M-0.3M 60-00-4
Homopiperazine, 98% 505-66-8
TG-SDS 10X Solution 56-40-6
Tris-Glycine 10X Solution 56-40-6
Sodium dodecyl sulfate 10% to 20% solutions 151-21-3
2-Tetradecanol ,90-95% 4706-81-4
4-Vinylaniline 1520-21-4
Valencene, tech 4630-07-3
Sulforhodamine 101 sulfonyl chloride, 98% (uv-vis) 60311-02-6
4,5-Diamino-6-hydroxypyrimidine sulfate, 99% 53435-17-9
3-Phenylpropyl mercaptan, 97% (gc) 24734-68-7
Sulfur Standard Solution (1000 ppm) 7732-18-5
Sulfur Standard Solution (10000ppm) 7732-18-5
Hydrochloric Acid 5N 7647-01-0
(S)-(+)-2-Amino-3-hydroxy-3-methylbutanoic acid 2280-27-5
Phosphorous Oxychloride 10025-87-3
4-Hydroxy-4-methyl-2-pentanone 123-42-2
Ammonium cerium (IV) sulfate dihydrate 7637-03-8
tri-Ammonium Citrate 3458-72-8
Ammonium Copper (II) Chloride Dihydrate 15610-76-1
Ammonium Dihydrogen Orthophosphate 7722-76-1
Ammonium Iron (III) Sulfate 7783-83-7
Ammonium Iron (II) Sulfate 7783-85-9
Ammonium Hydrogen Sulfate 7803-63-6
Amylase Bacterial 9000-85-5
Iso-Amyl Nitrite 110-46-3
Benzoin 119-53-9
2-(2-Ethoxyethoxy)Ethan(ol)-D1 37421-08-2
Iso-Amyl Acetate 123-92-2
Ammonium Thiosulfate 7783-18-8
Ammonium (+) Tartrate 3164-29-2
Ammonium Polysulfide Solution (10 % w/v hydrogen sulfide) 12259-92-6
Chlorobenzene-D5, 98.5+ Atom % D 3114-55-4
Ammonium Sulfamate 7773-06-0
Ammonium Sodium Hydrogen Orthophosphate 13011-54-6
Triammonium orthophosphate trihydrate 10124-31-9
Ammonium Nickel Sulfate 15699-18-0
Aniline Hydrochloride 142-04-1
8-Anilino-1-naphthalenesulfonic acid, ammonium salt 28836-03-5
Anisaldehyde 123-11-5
alpha-Benzoin Oxime 441-38-3
Anisole 100-66-3
Anthracene 120-12-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net