Search   
MSDS 
:
 Chlorobenzene-D5, 98.5+ Atom % D
CAS 
:
 3114-55-4
SYNONYMS 
:
 Benzene Chloride-D5; Chlorobenzene-D5; Chlorobenzol-D5; MCB-D5;     Monochlorobenzene-D5; Phenyl Chloride-D5.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 3114-55-4 |CHLOROBENZENE-D5 | >98.5 | 221-482-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN N
Risk Phrases: 10 20 51/53

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Harmful by inhalation. Toxic to aquatic organisms, may
cause long-term adverse effects in the aquatic environment.

Potential Health Effects
Eye:
Contact produces irritation, tearing, and burning pain. Causes
redness and pain.
Skin:
Causes skin irritation. Prolonged and/or repeated contact may cause
defatting of the skin and dermatitis. Produces acneiform eruptions.
Ingestion:
Harmful if swallowed. May cause liver and kidney damage. May cause
central nervous system depression, characterized by excitement,
followed by headache, dizziness, drowsiness, and nausea. Advanced
stages may cause collapse, unconsciousness, coma and possible death
due to respiratory failure. May cause nausea and vomiting. May cause
central nervous system depression. May be harmful if swallowed. May
cause hemolysis.
Inhalation:
Harmful if inhaled. Inhalation of high concentrations may cause
central nervous system effects characterized by nausea, headache,
dizziness, unconsciousness and coma. Causes respiratory tract
irritation. May cause effects similar to those described for
ingestion. May cause dizziness, incoordination, and unconsciousness.
Exposure may cause bone marrow changes. Exposure may cause blood
abnormalities.
Chronic:
Chronic inhalation and ingestion may cause effects similar to those
of acute inhalation and ingestion. Repeated contact may result in
skin burns.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately. Wash mouth out with
water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Flammable liquid
and vapor. Vapors may be heavier than air. They can spread along
the ground and collect in low or confined areas. Containers may
explode when heated.
Extinguishing Media:
Water may be ineffective. Do NOT use straight streams of water. For
small fires, use dry chemical, carbon dioxide, water spray or
regular foam. Cool containers with flooding quantities of water
until well after fire is out. For large fires, use water spray, fog
or regular foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. A vapor suppressing foam
may be used to reduce vapors. Water spray may reduce vapor but may
not prevent ignition in closed spaces.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat and flame. Keep away from sources of ignition.
Store in a tightly closed container. Keep from contact with oxidizing
materials. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels below recommended
exposure limits. Facilities storing or utilizing this material should
be equipped with an eyewash facility and a safety shower.
Exposure Limits
CAS# 3114-55-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless - clear, colorless
Odor: mild odor, almond-like
pH: Not available.
Vapor Pressure: 12 mm Hg @ 25 C
Viscosity: 0.8 mPa s 20 C
Boiling Point: 132 deg C
Freezing/Melting Point: -46 deg C
Autoignition Temperature: 638.8 deg C ( 1,181.84 deg F)
Flash Point: 29.5 deg C ( 85.10 deg F)
Explosion Limits, lower: 1.8
Explosion Limits, upper: 9.6
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water.
Specific Gravity/Density: 1.107 @ 4C
Molecular Formula: C6H5Cl
Molecular Weight: 112.488

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Contact with oxidizing agents may cause fires and explosions. Reacts
violently with dimethyl sulfoxide, silver perchlorate, powdered
sodium and phosphorus trichloride + sodium.
Hazardous Decomposition Products:
Hydrogen chloride, phosgene, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 3114-55-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
CHLOROBENZENE-D5 -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
For more information, see "HANDBOOK OF ENVIRONMENTAL FATE AND
EXPOSURE DATA."

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CHLOROBENZENE
Hazard Class: 3
UN Number: 1134
Packing Group: III
IMO
Shipping Name: CHLOROBENZENE
Hazard Class: 3.3
UN Number: 1134
Packing Group: III
RID/ADR
Shipping Name: CHLOROBENZENE
Hazard Class: 3
UN Number: 1134
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN N
Risk Phrases:
R 10 Flammable.
R 20 Harmful by inhalation.
R 51/53 Toxic to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 3114-55-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 3114-55-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 3114-55-4 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
EcoSafe 0-00-0
2'-Deoxyuridine, 99+% 951-78-0
OptiFlow Safe 0-00-0
Acetonitrile, HPLC grade, 99.9% 75-05-8
N-Methyloctylamine, 85% 2439-54-5
3-Bromopyruvic Acid Hydrate, 98% 1113-59-3
Nessler's Reagent 1310-73-2
Tris Buffer Solution 1.0M-0.3M 60-00-4
Homopiperazine, 98% 505-66-8
TG-SDS 10X Solution 56-40-6
Tris-Glycine 10X Solution 56-40-6
Sodium dodecyl sulfate 10% to 20% solutions 151-21-3
2-Tetradecanol ,90-95% 4706-81-4
4-Vinylaniline 1520-21-4
Valencene, tech 4630-07-3
Sulforhodamine 101 sulfonyl chloride, 98% (uv-vis) 60311-02-6
4,5-Diamino-6-hydroxypyrimidine sulfate, 99% 53435-17-9
3-Phenylpropyl mercaptan, 97% (gc) 24734-68-7
Sulfur Standard Solution (1000 ppm) 7732-18-5
Sulfur Standard Solution (10000ppm) 7732-18-5
Hydrochloric Acid 5N 7647-01-0
(S)-(+)-2-Amino-3-hydroxy-3-methylbutanoic acid 2280-27-5
Phosphorous Oxychloride 10025-87-3
4-Hydroxy-4-methyl-2-pentanone 123-42-2
Ammonium cerium (IV) sulfate dihydrate 7637-03-8
tri-Ammonium Citrate 3458-72-8
Ammonium Copper (II) Chloride Dihydrate 15610-76-1
Ammonium Dihydrogen Orthophosphate 7722-76-1
Ammonium Iron (III) Sulfate 7783-83-7
Ammonium Iron (II) Sulfate 7783-85-9
Ammonium Hydrogen Sulfate 7803-63-6
Amylase Bacterial 9000-85-5
Iso-Amyl Nitrite 110-46-3
Benzoin 119-53-9
2-(2-Ethoxyethoxy)Ethan(ol)-D1 37421-08-2
Iso-Amyl Acetate 123-92-2
Ammonium Thiosulfate 7783-18-8
Ammonium (+) Tartrate 3164-29-2
Ammonium Polysulfide Solution (10 % w/v hydrogen sulfide) 12259-92-6
Chlorobenzene-D5, 98.5+ Atom % D 3114-55-4
Ammonium Sulfamate 7773-06-0
Ammonium Sodium Hydrogen Orthophosphate 13011-54-6
Triammonium orthophosphate trihydrate 10124-31-9
Ammonium Nickel Sulfate 15699-18-0
Aniline Hydrochloride 142-04-1
8-Anilino-1-naphthalenesulfonic acid, ammonium salt 28836-03-5
Anisaldehyde 123-11-5
alpha-Benzoin Oxime 441-38-3
Anisole 100-66-3
Anthracene 120-12-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net