Search   
MSDS 
:
 (S)-(+)-2-Amino-3-hydroxy-3-methylbutanoic acid
CAS 
:
 2280-27-5
SYNONYMS 
:
 L-(+)-Hydroxyvaline.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2280-27-5 |3-Hydroxy-L-valine | 98 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid breathing
dust.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2280-27-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 201-203 deg C (dec)
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature: 201-203 deg C
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C5H11NO3
Molecular Weight: 133.15

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stability unknown.
Conditions to Avoid:
Dust generation, moisture, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2280-27-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3-Hydroxy-L-valine -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 2280-27-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 2280-27-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2280-27-5 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/30/1998 Revision #3 Date: 1/12/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
EcoSafe 0-00-0
2'-Deoxyuridine, 99+% 951-78-0
OptiFlow Safe 0-00-0
Acetonitrile, HPLC grade, 99.9% 75-05-8
N-Methyloctylamine, 85% 2439-54-5
3-Bromopyruvic Acid Hydrate, 98% 1113-59-3
Nessler's Reagent 1310-73-2
Tris Buffer Solution 1.0M-0.3M 60-00-4
Homopiperazine, 98% 505-66-8
TG-SDS 10X Solution 56-40-6
Tris-Glycine 10X Solution 56-40-6
Sodium dodecyl sulfate 10% to 20% solutions 151-21-3
2-Tetradecanol ,90-95% 4706-81-4
4-Vinylaniline 1520-21-4
Valencene, tech 4630-07-3
Sulforhodamine 101 sulfonyl chloride, 98% (uv-vis) 60311-02-6
4,5-Diamino-6-hydroxypyrimidine sulfate, 99% 53435-17-9
3-Phenylpropyl mercaptan, 97% (gc) 24734-68-7
Sulfur Standard Solution (1000 ppm) 7732-18-5
Sulfur Standard Solution (10000ppm) 7732-18-5
Hydrochloric Acid 5N 7647-01-0
(S)-(+)-2-Amino-3-hydroxy-3-methylbutanoic acid 2280-27-5
Phosphorous Oxychloride 10025-87-3
4-Hydroxy-4-methyl-2-pentanone 123-42-2
Ammonium cerium (IV) sulfate dihydrate 7637-03-8
tri-Ammonium Citrate 3458-72-8
Ammonium Copper (II) Chloride Dihydrate 15610-76-1
Ammonium Dihydrogen Orthophosphate 7722-76-1
Ammonium Iron (III) Sulfate 7783-83-7
Ammonium Iron (II) Sulfate 7783-85-9
Ammonium Hydrogen Sulfate 7803-63-6
Amylase Bacterial 9000-85-5
Iso-Amyl Nitrite 110-46-3
Benzoin 119-53-9
2-(2-Ethoxyethoxy)Ethan(ol)-D1 37421-08-2
Iso-Amyl Acetate 123-92-2
Ammonium Thiosulfate 7783-18-8
Ammonium (+) Tartrate 3164-29-2
Ammonium Polysulfide Solution (10 % w/v hydrogen sulfide) 12259-92-6
Chlorobenzene-D5, 98.5+ Atom % D 3114-55-4
Ammonium Sulfamate 7773-06-0
Ammonium Sodium Hydrogen Orthophosphate 13011-54-6
Triammonium orthophosphate trihydrate 10124-31-9
Ammonium Nickel Sulfate 15699-18-0
Aniline Hydrochloride 142-04-1
8-Anilino-1-naphthalenesulfonic acid, ammonium salt 28836-03-5
Anisaldehyde 123-11-5
alpha-Benzoin Oxime 441-38-3
Anisole 100-66-3
Anthracene 120-12-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net