Search   
MSDS 
:
 Aniline Hydrochloride
CAS 
:
 142-04-1
SYNONYMS 
:
 Benzenamine hydrochloride; anilinium chloride.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 142-04-1 |Aniline hydrochloride | 100 % | 205-519-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T N
Risk Phrases: 20/21/22 40 50 48/23/24/25

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.
Limited evidence of a carcinogenic effect. Very toxic to aquatic
organisms. Toxic : danger of serious damage to health by prolonged
exposure through inhalation, contact with skin and if
swallowed.Light sensitive.Cancer suspect agent.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May be absorbed through the skin in harmful
amounts.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause effects similar to those for inhalation exposure.
May be harmful if swallowed.
Inhalation:
Causes respiratory tract irritation. May cause methemoglobinemia,
cyanosis (bluish discoloration of skin due to deficient oxygenation
of the blood), convulsions, tachycardia, dyspnea (labored
breathing), and death. May cause adverse central nervous system
effects including headache, convulsions, and possible death.
Chronic:
May cause methemoglobinemia, which is characterized by
chocolate-brown colored blood, headache, weakness, dizziness, breath
shortness, cyanosis (bluish skin due to deficient oxygenation of
blood), rapid heart rate, unconsciousness and possible death. May
cause fetal effects. May cause cancer according to animal studies.
Repeated exposure may cause sensitization dermatitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Reduce airborne dust and prevent scattering by moistening
with water. Clean up spills immediately, observing precautions in
the Protective Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Use only
in a well-ventilated area. Do not breathe dust, vapor, mist, or gas.
Do not get on skin or in eyes. Do not ingest or inhale.
Storage:
Store in a cool, dry place. Do not store in direct sunlight. Store
in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 142-04-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 245 deg C
Freezing/Melting Point: 198 deg C
Autoignition Temperature: Not applicable.
Flash Point: 193 deg C ( 379.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble in water.
Specific Gravity/Density: 1.22
Molecular Formula: C6H7N.HCl
Molecular Weight: 129.59

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, light.
Incompatibilities with Other Materials:
Strong oxidizing agents. Dicolors upon exposure to light.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 142-04-1: CY0875000
LD50/LC50:
CAS# 142-04-1: Draize test, rabbit, eye: 20 mg/24H Moderate; Draize
test, rabbit, skin: 500 mg/24H Moderate; Oral, mouse: LD50 = 841
mg/kg; Oral, rat: LD50 = 840 mg/kg.
Carcinogenicity:
Aniline hydrochloride -
California: carcinogen, initial date 5/15/98
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Water danger/protection: WGK 2
LC50 (48H) goldfish 5.5 mg/l

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ANILINE HYDROCHLORIDE
Hazard Class: 6.1
UN Number: 1548
Packing Group: III
IMO
Shipping Name: ANILINE HYDROCHLORIDE
Hazard Class: 6.1
UN Number: 1548
Packing Group: III
RID/ADR
Shipping Name: ANILINE HYDROCHLORIDE
Hazard Class: 6.1
UN Number: 1548
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T N
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 40 Limited evidence of a carcinogenic effect.
R 48/23/24/25 Toxic : danger of serious damage to
health by prolonged exposure through inhalation,
contact with skin and if swallowed.
R 50 Very toxic to aquatic organisms.
Safety Phrases:
S 28 After contact with skin, wash immediately
with...
S 36/37 Wear suitable protective clothing and
gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 142-04-1: 2
Canada
CAS# 142-04-1 is listed on Canada's DSL List.
CAS# 142-04-1 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 142-04-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/12/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
EcoSafe 0-00-0
2'-Deoxyuridine, 99+% 951-78-0
OptiFlow Safe 0-00-0
Acetonitrile, HPLC grade, 99.9% 75-05-8
N-Methyloctylamine, 85% 2439-54-5
3-Bromopyruvic Acid Hydrate, 98% 1113-59-3
Nessler's Reagent 1310-73-2
Tris Buffer Solution 1.0M-0.3M 60-00-4
Homopiperazine, 98% 505-66-8
TG-SDS 10X Solution 56-40-6
Tris-Glycine 10X Solution 56-40-6
Sodium dodecyl sulfate 10% to 20% solutions 151-21-3
2-Tetradecanol ,90-95% 4706-81-4
4-Vinylaniline 1520-21-4
Valencene, tech 4630-07-3
Sulforhodamine 101 sulfonyl chloride, 98% (uv-vis) 60311-02-6
4,5-Diamino-6-hydroxypyrimidine sulfate, 99% 53435-17-9
3-Phenylpropyl mercaptan, 97% (gc) 24734-68-7
Sulfur Standard Solution (1000 ppm) 7732-18-5
Sulfur Standard Solution (10000ppm) 7732-18-5
Hydrochloric Acid 5N 7647-01-0
(S)-(+)-2-Amino-3-hydroxy-3-methylbutanoic acid 2280-27-5
Phosphorous Oxychloride 10025-87-3
4-Hydroxy-4-methyl-2-pentanone 123-42-2
Ammonium cerium (IV) sulfate dihydrate 7637-03-8
tri-Ammonium Citrate 3458-72-8
Ammonium Copper (II) Chloride Dihydrate 15610-76-1
Ammonium Dihydrogen Orthophosphate 7722-76-1
Ammonium Iron (III) Sulfate 7783-83-7
Ammonium Iron (II) Sulfate 7783-85-9
Ammonium Hydrogen Sulfate 7803-63-6
Amylase Bacterial 9000-85-5
Iso-Amyl Nitrite 110-46-3
Benzoin 119-53-9
2-(2-Ethoxyethoxy)Ethan(ol)-D1 37421-08-2
Iso-Amyl Acetate 123-92-2
Ammonium Thiosulfate 7783-18-8
Ammonium (+) Tartrate 3164-29-2
Ammonium Polysulfide Solution (10 % w/v hydrogen sulfide) 12259-92-6
Chlorobenzene-D5, 98.5+ Atom % D 3114-55-4
Ammonium Sulfamate 7773-06-0
Ammonium Sodium Hydrogen Orthophosphate 13011-54-6
Triammonium orthophosphate trihydrate 10124-31-9
Ammonium Nickel Sulfate 15699-18-0
Aniline Hydrochloride 142-04-1
8-Anilino-1-naphthalenesulfonic acid, ammonium salt 28836-03-5
Anisaldehyde 123-11-5
alpha-Benzoin Oxime 441-38-3
Anisole 100-66-3
Anthracene 120-12-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net