Search   
MSDS 
:
 N-Methyloctylamine, 85%
CAS 
:
 2439-54-5
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2439-54-5 |n-Methyloctylamine | 85 | 219-462-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
No information found. None

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use water spray,
dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Discard contaminated shoes. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances. Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 2439-54-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear almost colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 68 deg C @ 8.00mm Hg
Freezing/Melting Point: 0 deg C
Autoignition Temperature: Not available.
Flash Point: 63 deg C ( 145.40 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .7900g/cm3
Molecular Formula: C9H21N
Molecular Weight: 143.27

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents
Hazardous Decomposition Products:
Nitrogen oxides, irritating and toxic fumes and gases, nitrogen.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2439-54-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
n-Methyloctylamine -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 28 After contact with skin, wash immediately
with...
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 2439-54-5: No information available.
Canada
CAS# 2439-54-5 is listed on Canada's NDSL List.
CAS# 2439-54-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2439-54-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/04/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
EcoSafe 0-00-0
2'-Deoxyuridine, 99+% 951-78-0
OptiFlow Safe 0-00-0
Acetonitrile, HPLC grade, 99.9% 75-05-8
N-Methyloctylamine, 85% 2439-54-5
3-Bromopyruvic Acid Hydrate, 98% 1113-59-3
Nessler's Reagent 1310-73-2
Tris Buffer Solution 1.0M-0.3M 60-00-4
Homopiperazine, 98% 505-66-8
TG-SDS 10X Solution 56-40-6
Tris-Glycine 10X Solution 56-40-6
Sodium dodecyl sulfate 10% to 20% solutions 151-21-3
2-Tetradecanol ,90-95% 4706-81-4
4-Vinylaniline 1520-21-4
Valencene, tech 4630-07-3
Sulforhodamine 101 sulfonyl chloride, 98% (uv-vis) 60311-02-6
4,5-Diamino-6-hydroxypyrimidine sulfate, 99% 53435-17-9
3-Phenylpropyl mercaptan, 97% (gc) 24734-68-7
Sulfur Standard Solution (1000 ppm) 7732-18-5
Sulfur Standard Solution (10000ppm) 7732-18-5
Hydrochloric Acid 5N 7647-01-0
(S)-(+)-2-Amino-3-hydroxy-3-methylbutanoic acid 2280-27-5
Phosphorous Oxychloride 10025-87-3
4-Hydroxy-4-methyl-2-pentanone 123-42-2
Ammonium cerium (IV) sulfate dihydrate 7637-03-8
tri-Ammonium Citrate 3458-72-8
Ammonium Copper (II) Chloride Dihydrate 15610-76-1
Ammonium Dihydrogen Orthophosphate 7722-76-1
Ammonium Iron (III) Sulfate 7783-83-7
Ammonium Iron (II) Sulfate 7783-85-9
Ammonium Hydrogen Sulfate 7803-63-6
Amylase Bacterial 9000-85-5
Iso-Amyl Nitrite 110-46-3
Benzoin 119-53-9
2-(2-Ethoxyethoxy)Ethan(ol)-D1 37421-08-2
Iso-Amyl Acetate 123-92-2
Ammonium Thiosulfate 7783-18-8
Ammonium (+) Tartrate 3164-29-2
Ammonium Polysulfide Solution (10 % w/v hydrogen sulfide) 12259-92-6
Chlorobenzene-D5, 98.5+ Atom % D 3114-55-4
Ammonium Sulfamate 7773-06-0
Ammonium Sodium Hydrogen Orthophosphate 13011-54-6
Triammonium orthophosphate trihydrate 10124-31-9
Ammonium Nickel Sulfate 15699-18-0
Aniline Hydrochloride 142-04-1
8-Anilino-1-naphthalenesulfonic acid, ammonium salt 28836-03-5
Anisaldehyde 123-11-5
alpha-Benzoin Oxime 441-38-3
Anisole 100-66-3
Anthracene 120-12-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net