Search   
MSDS 
:
 Azodicarbonamide, 97%
CAS 
:
 123-77-3
SYNONYMS 
:
 1,1'-Azobisformamide.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 123-77-3 |Azodicarbonamide | 97 | 204-650-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 42 44

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
May cause sensitization by inhalation. Risk of explosion if heated
under confinement.

Potential Health Effects
Eye:
Dust may cause mechanical irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause allergic respiratory reaction.
Chronic:
Repeated exposure may cause allergic respiratory reaction (asthma).

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. May be
ignited by heat, sparks, and flame. Vapors or dust may form
explosive mixture with air. May burn violently. Decomposition may be
self-accelerated and produce large amounts of gas. Self-decomposition
or self-ignition may be triggered by heat, chemical reaction,
friction or impact.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
regular foam. Cool containers with flooding quantities of water
until well after fire is out. For large fires, flood fire area with
water from a distance.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Remove all sources of ignition. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Do not breathe dust.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 123-77-3:
United Kingdom, WEL - TWA: 1.0 mg/m3 TWA
United Kingdom, WEL - STEL: 3.0 mg/m3 STEL

Netherlands: 3 mg/m3 STEL
Netherlands: 1 mg/m3 MAC

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: yellow-orange
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 225 deg C (dec)
Autoignition Temperature: Not available.
Flash Point: 225 deg C ( 437.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 225 deg C
Solubility in water: Soluble in hot water.
Specific Gravity/Density:
Molecular Formula: C2H4N4O2
Molecular Weight: 116.08

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Risk of explosion if heated under confinement.
Conditions to Avoid:
Dust generation, excess heat, heating in a confined space.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, ammonia and/or
derivatives.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 123-77-3: LQ1040000
LD50/LC50:
CAS# 123-77-3: Oral, rat: LD50 = >6400 mg/kg; Skin, rat: LD50 = >500
mg/kg.
Not available.
Carcinogenicity:
Azodicarbonamide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AZODICARBONAMIDE
Hazard Class: 4.1
UN Number: 3242
Packing Group:
IMO
Shipping Name: AZODICARBONAMIDE
Hazard Class: 4.1
UN Number: 3242
Packing Group: II
RID/ADR
Shipping Name: AZODICARBONAMIDE
Hazard Class: 4.1
UN Number: 3242
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 42 May cause sensitization by inhalation.
R 44 Risk of explosion if heated under confinement.
Safety Phrases:
S 22 Do not breathe dust.
S 24 Avoid contact with skin.
S 37 Wear suitable gloves.
WGK (Water Danger/Protection)
CAS# 123-77-3: 1
Canada
CAS# 123-77-3 is listed on Canada's DSL List.
CAS# 123-77-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 123-77-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 10/29/1998 Revision #3 Date: 2/03/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Hexadecyltrimethylammonium hydroxide (25% in methanol) 67-56-1
d-(-)-alpha-Phenylglycine, 98% 875-74-1
1,2-Ethanedithiol, 99+% (GC) 540-63-6
Guaiazulene, 99% 489-84-9
Triethylsilane, 99% 617-86-7
5-Chloro-2-Methylindole, 95% 1075-35-0
Uridine 5'-diphosphate, trisodium salt hydrate 19817-91-5
Coumarin 337, Laser Grade, 99% (UV-Vis) 55804-68-7
5,7-Dimethyl-4-Hydroxypyrido(2,3-D)-Pyrimidine, 98% 0-00-1
beta-Naphthoflavone, 99+% 6051-87-2
1,4-Thioxane-1,1-Dioxide, 99+% 107-61-9
o-Toluic acid, 98+% 118-90-1
1-Bromo-2-iodobenzene, 99%, stabilized with copper 583-55-1
2-Methylheptane, 99% 592-27-8
Pyrrolidone Hydrotribromide, 97% 52215-12-0
Benzyl Methyl Ether, 99% 538-86-3
Pyrazinamide, 99% 98-96-4
3,6-exo-oxo-1,2,3,6-tetrahydrophthalic anhydride 5426-09-5
4-Chlorobenzoyl chloride 122-01-0
Bis-(2-Chloroethyl)-Amine Hydrochloride, 98% 821-48-7
1-Chloro-2-methylpropane, 98% 513-36-0
D(+)-Malic acid, 98% 636-61-3
N-Hydroxyphthalimide, 99% (Titr., Dry Subst., Remainder 10-15% 524-38-9
Ethylamine hydrochloride, 99% 557-66-4
1,2,4-Trifluorobenzene, 97+% 367-23-7
4-Pentyloxyaniline, 99% 39905-50-5
p-Methoxycinnamic acid, 99% (titr.) 830-09-1
3-(Methylthio)-1-Propanol, 98% 505-10-2
Pararosaniline Base 25620-78-4
4-Amino-1,8-naphthalimide, 98% 1742-95-6
P-Toluic Hydrazide, 98% 3619-22-5
Methylhydroquinone, 99% 95-71-6
1,4-Diaminobutane, 99% 110-60-1
Acid Red 88 1658-56-6
Azodicarbonamide, 97% 123-77-3
4-Phenoxyaniline, 97% 139-59-3
(R)-(+)-sec-Phenethyl alcohol, 99% 1517-69-7
(S)-(-)-N-Benzyl-Alpha-Methylbenzylamine, 98% 17480-69-2
4-Pentylbenzoyl Chloride, 99% 49763-65-7
L-(+)-Norvaline, 99% 6600-40-4
Cortexolone, 99% 152-58-9
1-Nonene, 99% 124-11-8
2-Amino-5-Ethyl-1,3,4-Thiadiazole, 98+% 14068-53-2
2,3,7-Trimethylindole 27505-78-8
5-[(4,6-Dichlorotriazin-2-yl)amino] fluorescein hydrochloride, 99% 21799-87-1
3-(2-Isothiocyanatoethyl-carbamoyl)-PROXYL, free radical 100929-92-8
1-Dodecanol, 98% 112-53-8
(3-Mercaptopropyl)trimethoxysilane tech. 85% 67-56-1
Sparkleen 2 497-19-8
N-(2-Hydroxyethyl)Piperazine, 98% 103-76-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net