Search   
MSDS 
:
 1-Chloro-2-methylpropane, 98%
CAS 
:
 513-36-0
SYNONYMS 
:
 Isobutyl chloride; Propane, 1-chloro-2-methyl-
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 513-36-0 |1-Chloro-2-methylpropane | 98 | 208-157-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable.The toxicological properties of this material have
not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Vapors may cause
dizziness or suffocation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Water runoff can cause environmental damage. Dike
and collect water used to fight fire. Vapors may form an explosive
mixture with air. Vapors can travel to a source of ignition and
flash back. During a fire, irritating and highly toxic gases may be
generated by thermal decomposition or combustion. Use water spray to
keep fire-exposed containers cool. Extremely flammable liquid and
vapor. Water may be ineffective. Material is lighter than water and a
fire may be spread by the use of water. Containers may explode in the
heat of a fire. Vapors may be heavier than air. They can spread
along the ground and collect in low or confined areas. Will be
easily ignited by heat, sparks or flame.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. This material is lighter than
water and insoluble in water. The fire could easily be spread by the
use of water in an area where the water cannot be contained. Use
extinguishing media most appropriate for the surrounding fire. Do NOT
use straight streams of water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid breathing
dust, vapor, mist, or gas. Avoid contact with eyes, skin, and
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Take precautionary measures against
static discharges. Keep container tightly closed. Keep away from
heat, sparks and flame. Avoid ingestion and inhalation. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Refrigerator/flammables. Keep refrigerated. (Store below 4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 513-36-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: Characteristic odor
pH: Not available.
Vapor Pressure: 120 mm Hg @ 20 C
Viscosity: 0.46 mPas 20 deg C
Boiling Point: 68 - 69 deg C @ 760.00mm Hg
Freezing/Melting Point: -131 deg C
Autoignition Temperature: 395 deg C ( 743.00 deg F)
Flash Point: -10 deg C ( 14.00 deg F)
Explosion Limits, lower: 2.00 vol %
Explosion Limits, upper: 8.80 vol %
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density: .8830g/cm3
Molecular Formula: C4H9Cl
Molecular Weight: 92.57

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 513-36-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Chloro-2-methylpropane -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CHLOROBUTANES
Hazard Class: 3
UN Number: 1127
Packing Group: II
IMO
Shipping Name: CHLOROBUTANES
Hazard Class: 3.2
UN Number: 1127
Packing Group: II
RID/ADR
Shipping Name: CHLOROBUTANES
Hazard Class: 3
UN Number: 1127
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 28A After contact with skin, wash immediately with
plenty of water.
S 29 Do not empty into drains.
S 33 Take precautionary measures against static
discharges.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 513-36-0: 2
Canada
CAS# 513-36-0 is listed on Canada's DSL List.
CAS# 513-36-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 513-36-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/18/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Hexadecyltrimethylammonium hydroxide (25% in methanol) 67-56-1
d-(-)-alpha-Phenylglycine, 98% 875-74-1
1,2-Ethanedithiol, 99+% (GC) 540-63-6
Guaiazulene, 99% 489-84-9
Triethylsilane, 99% 617-86-7
5-Chloro-2-Methylindole, 95% 1075-35-0
Uridine 5'-diphosphate, trisodium salt hydrate 19817-91-5
Coumarin 337, Laser Grade, 99% (UV-Vis) 55804-68-7
5,7-Dimethyl-4-Hydroxypyrido(2,3-D)-Pyrimidine, 98% 0-00-1
beta-Naphthoflavone, 99+% 6051-87-2
1,4-Thioxane-1,1-Dioxide, 99+% 107-61-9
o-Toluic acid, 98+% 118-90-1
1-Bromo-2-iodobenzene, 99%, stabilized with copper 583-55-1
2-Methylheptane, 99% 592-27-8
Pyrrolidone Hydrotribromide, 97% 52215-12-0
Benzyl Methyl Ether, 99% 538-86-3
Pyrazinamide, 99% 98-96-4
3,6-exo-oxo-1,2,3,6-tetrahydrophthalic anhydride 5426-09-5
4-Chlorobenzoyl chloride 122-01-0
Bis-(2-Chloroethyl)-Amine Hydrochloride, 98% 821-48-7
1-Chloro-2-methylpropane, 98% 513-36-0
D(+)-Malic acid, 98% 636-61-3
N-Hydroxyphthalimide, 99% (Titr., Dry Subst., Remainder 10-15% 524-38-9
Ethylamine hydrochloride, 99% 557-66-4
1,2,4-Trifluorobenzene, 97+% 367-23-7
4-Pentyloxyaniline, 99% 39905-50-5
p-Methoxycinnamic acid, 99% (titr.) 830-09-1
3-(Methylthio)-1-Propanol, 98% 505-10-2
Pararosaniline Base 25620-78-4
4-Amino-1,8-naphthalimide, 98% 1742-95-6
P-Toluic Hydrazide, 98% 3619-22-5
Methylhydroquinone, 99% 95-71-6
1,4-Diaminobutane, 99% 110-60-1
Acid Red 88 1658-56-6
Azodicarbonamide, 97% 123-77-3
4-Phenoxyaniline, 97% 139-59-3
(R)-(+)-sec-Phenethyl alcohol, 99% 1517-69-7
(S)-(-)-N-Benzyl-Alpha-Methylbenzylamine, 98% 17480-69-2
4-Pentylbenzoyl Chloride, 99% 49763-65-7
L-(+)-Norvaline, 99% 6600-40-4
Cortexolone, 99% 152-58-9
1-Nonene, 99% 124-11-8
2-Amino-5-Ethyl-1,3,4-Thiadiazole, 98+% 14068-53-2
2,3,7-Trimethylindole 27505-78-8
5-[(4,6-Dichlorotriazin-2-yl)amino] fluorescein hydrochloride, 99% 21799-87-1
3-(2-Isothiocyanatoethyl-carbamoyl)-PROXYL, free radical 100929-92-8
1-Dodecanol, 98% 112-53-8
(3-Mercaptopropyl)trimethoxysilane tech. 85% 67-56-1
Sparkleen 2 497-19-8
N-(2-Hydroxyethyl)Piperazine, 98% 103-76-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net