Search   
MSDS 
:
 2,6-Di-tert-butyl-p-cresol
CAS 
:
 128-37-0
SYNONYMS 
:
 BHT; Butylated hydroxytoluene; 2,6-Di-tert-butyl-p-methylphenol;     DBPC; 2,6-Bis(1,1-dimethylethyl)-4-methylphenol.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 128-37-0 |2,6-Di-tert-butyl-p-cresol | 100 | 204-881-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22 36

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Irritating to eyes.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea. May be harmful if swallowed.
Inhalation:
Causes respiratory tract irritation.
Chronic:
Adverse reproductive effects have been reported in animals.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Reduce airborne dust and prevent scattering by moistening
with water. Clean up spills immediately, observing precautions in
the Protective Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Remove
contaminated clothing and wash before reuse. Use with adequate
ventilation. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Avoid breathing dust.
Storage:
Store in a cool, dry place. Do not store in direct sunlight. Keep
container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Always use
a NIOSH or European Standard EN 149 approved
respirator when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: colorless
Odor: Faint, characteristic odor.
pH: Not available.
Vapor Pressure: 0.01 mm Hg @ 20 deg C
Viscosity: Not available.
Boiling Point: 265 deg C
Freezing/Melting Point: 70 deg C
Autoignition Temperature: 878 deg F ( 470.00 deg C)
Flash Point: 260 deg F ( 126.67 deg C)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water.
Specific Gravity/Density: 1.048
Molecular Formula: C15H24O
Molecular Weight: 220.35

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Light, dust generation.
Incompatibilities with Other Materials:
Acid chlorides, acid anhydrides, oxidizing agents, bases, steel
(corrodes it), brass, copper, copper alloys, and direct sunlight.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 128-37-0: GO7875000
LD50/LC50:
CAS# 128-37-0: Draize test, rabbit, eye: 100 mg/24H Moderate; Draize
test, rabbit, skin: 500 mg/48H Moderate; Oral, mouse: LD50 = 650
mg/kg; Oral, mouse: LD50 = 1040 mg/kg; Oral, rabbit: LD50 = 2100
mg/kg; Oral, rat: LD50 = 890 mg/kg.
Carcinogenicity:
2,6-Di-tert-butyl-p-cresol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Killifish: LC50 = 2.5 mg/L; 48 Hr.; Unspecified

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
R 36 Irritating to eyes.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 128-37-0: 1
United Kingdom Occupational Exposure Limits

United Kingdom Maximum Exposure Limits

Canada
CAS# 128-37-0 is listed on Canada's DSL List.
CAS# 128-37-0 is listed on Canada's Ingredient Disclosure List.
Exposure Limits
CAS# 128-37-0: OEL-AUSTRALIA:TWA 10 mg/m3
OEL-BELGIUM:TWA 10 mg/m3
OEL-FINLAND:TWA 10 mg/m3;STEL 20 mg/m3;Skin
OEL-FRANCE:TWA 10 mg/m3
OEL-THE NETHERLANDS:TWA 10 mg/m3
OEL-SWITZERLAND:TWA 10 mg/m3
OEL-UNITED KINGDOM:TWA 10 mg/m3
OEL IN BULGARIA, COLOMBIA, JORDAN, KOREA check ACGIH TLV
OEL IN NEW ZEALAND, SINGAPORE, VIETNAM check ACGI TLV
US FEDERAL
TSCA
CAS# 128-37-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/21/1999 Revision #5 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Copper (II) Sulfide 1317-40-4
Copper (I) Cyanide 544-92-3
Copper (I) Iodide 7681-65-4
3-Amino-1-Propanol, 99% 156-87-6
Copper (I) Oxide 1317-39-1
Curcumin 458-37-7
Iso-Cyanatobenzene 103-71-9
Cyclohexane-1,2-dione 765-87-7
Cyclohexylamine 108-91-8
p-Cymene 99-87-6
L-Cysteine 52-90-4
L-Cysteine Hydrochloride Monohydrate 52-89-1
5-Fluorouracil, 99% 51-21-8
Poly(Ethyl Methacrylate), Sec. Stand., Aver. M.W.340000, Aver. 9003-42-3
gamma-Cyclodextrin 17465-86-0
Dabsyl Chloride 56512-49-3
Dansyl Aziridine 51908-46-4
Dansyl Hydrazine 33008-06-9
1-Decanesulfonic Acid, Sodium Salt 13419-61-9
N-(P-Aminobenzoyl)-L-Glutamic Acid Diethyl Ester, 99% 13726-52-8
Dextrin 9004-53-9
Diacetyl 431-03-8
1,2-Diaminoethane 16889-59-1
Diaminoethane tetra-Acetic Acid Diammonium Salt 20824-56-0
Diaminoethane tetra-Acetic Acid Dipotassium Salt Dihydrate 2001-94-7
Diaminoethane tetra-Acetic Acid Disodium Salt 139-33-3
Diaminoethane tetraacetic acid, tetrasodium salt tetrahydrate 64-02-8
2,4-Diaminophenol dihydrochloride 137-09-7
Dibenzo-18-crown-6 ether 14187-32-7
1,3-Dibromopropane 109-64-8
2,6-Di-tert-butyl-p-cresol 128-37-0
Di-n-butyl ether 142-96-1
Di-iso-butyl ketone 108-83-8
Dichloroacetic Acid 79-43-6
2,3-Dichloro-5,6-dicyanobenzoquinone 84-58-2
Dichlorofluorescein 76-54-0
1,1-Dichloromethyl Methyl Ether 4885-02-3
2,4-Dichlorophenol 120-83-2
Dicyclohexylamine 101-83-7
Dicyclohexylcarbodi-imide 538-75-0
Diethanolamine 111-42-2
1,1-Diethoxyethane 105-57-7
d-(-)-Lactic acid, lithium salt, 98% 27848-81-3
Diethylammonium Diethyl dithio-Carbamate 1518-58-7
Diethyl Carbonate 105-58-8
Di(2-ethylhexyl)phthalate 117-81-7
Diethyl Malonate 105-53-3
Diethyl oxalate 95-92-1
Diethyl Pyrocarbonate 1609-47-8
Diethyl Sulfate 64-67-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net