Search   
MSDS 
:
 Meta-Anisoyl Chloride, 99%
CAS 
:
 1711-05-3
SYNONYMS 
:
 None known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1711-05-3 |Meta-Anisoyl Chloride | 99 | 216-975-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. Contact with eyes may cause severe irritation,
and possible eye burns. May cause chemical conjunctivitis and
corneal damage.
Skin:
Causes skin burns. May cause severe irritation and possible burns.
May cause skin rash (in milder cases), and cold and clammy skin with
cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Aspiration may lead to
pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid. Get medical aid immediately. Flush skin with plenty
of water for at least 15 minutes while removing contaminated clothing
and shoes. Immediately flush skin with plenty of water for at least
15 minutes while removing contaminated clothing and shoes. Wash
clothing before reuse. Remove contaminated clothing and shoes.
Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Not available.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use only in a well-ventilated area. Do not breathe dust, vapor,
mist, or gas. Do not get in eyes, on skin, or on clothing. Keep
container tightly closed. Do not ingest or inhale. Discard
contaminated shoes.
Storage:
Keep container closed when not in use. Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1711-05-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: very slightly yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 123.0 - 125.0 deg C @ 15.00mm
Freezing/Melting Point: 0 deg C
Autoignition Temperature: Not available.
Flash Point: 92 deg C ( 197.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: may decompose
Specific Gravity/Density: 1.2140g/cm3
Molecular Formula: C8H7ClO2
Molecular Weight: 170.60

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Not available.
Incompatibilities with Other Materials:
Not available.
Hazardous Decomposition Products:
Not available.
Hazardous Polymerization: Not available.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1711-05-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Meta-Anisoyl Chloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ANISOYL CHLORIDE
Hazard Class: 8
UN Number: 1729
Packing Group: II
IMO
Shipping Name: ANISOYL CHLORIDE
Hazard Class: 8
UN Number: 1729
Packing Group: II
RID/ADR
Shipping Name: ANISOYL CHLORIDE
Hazard Class: 8
UN Number: 1729
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 36/39 Wear suitable protective clothing and
eye/face protection.
WGK (Water Danger/Protection)
CAS# 1711-05-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1711-05-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1711-05-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Diethyleneglycol Monoricinoleate 5401-17-2
Potassium, chunks, in mineral oil 7440-09-7
1-Naphthalenesulfonyl Chloride, 99% 85-46-1
2-(2-Chloroethoxy)-ethanol, 99% 628-89-7
1,2-Benzisoxazol-3-yl-diphenyl phosphate, 97%(TLC) 0-01-0
Aminoguanidine Bicarbonate, 98.5% 2582-30-1
2-Methyl-3-hexanol, 98% 617-27-6
3-Amino-1,2,4-Triazine, 97% 1120-99-6
2-Cyanophenol, 99% 611-20-1
2-Phenylpropyl isobutyrate, 98% 65813-53-8
1-Methyl-2-pyrrolidineethanol, 98% 67004-64-2
O-Tolunitrile, 98% 529-19-1
Ammonium Iodide, P.A. 12027-06-4
4-Ethyl-1,3-Dioxolan-2-one 4437-51-8
(-)-2,3-O-Benzylidene-(L)-Threitol, 98% 35572-34-0
1,12-Diaminododecane, 98% 2783-17-7
1,1,2-Trichloro-1,2,2-trifluoroethane 76-13-1
1,1,2-Trichloroethane 79-00-5
Bordeaux R 5858-33-3
Exo-2-Chloro-Syn-7-Hydroxymethyl-5-Oxo-Bicyclo??2.2.1??Heptane, 98% 0-00-1
9-Hydroxyfluorene, 97+% 1689-64-1
Boron tribromide 10035-10-6
6-Hydroxytropinone 5932-53-6
4-Chlorobenzenesulfonic acid (techn), 90% (titr.) 98-66-8
(+)-cis-2(r),3(s)-2,3-dihydroxy-2,3- dihydrobenzonitrile, 98+% (nmr) 138769-96-
Copper chromite, barium promoted 12053-18-8
2,5-Dimethyl-P-Anisaldehyde, 97% 6745-75-1
2,4,5-Trichlorotoluene, 98% 6639-30-1
Meta-Anisoyl Chloride, 99% 1711-05-3
bis(2-Hydroxyethyl)dimethylammonium chloride, 99% 38402-02-7
4-Bromo-2,5-difluoroanisole, 99%
3,5-Dimethoxycinnamic Acid, 99+% Predominantly Trans Isomer 16909-11-8
2-(2-nitro-4-benzoic acid)malondialdehyde
2,6-Difluorobenzoic Acid, 98% 385-00-2
Coumarin 314T, Laser Grade 113869-06-0
2-Methylheptanoic Acid, 98% 1188-02-9
Diethyl phosphite, 98% 64-17-5
3-Aminophenylacetylene, 99% (GC) 54060-30-9
7,12-Dimethylbenz(a)anthracene, 99%(uv-vis) 57-97-6
Bromoxylenol blue, indicator grade 40070-59-5
3-Nitrobenzoic acid, 99% 121-92-6
Neodymium(III)Nitrate Hexahydrate, 99.99% 16454-60-7
4,5-Dichlorophthalic Acid, 99% 56962-08-4
6-Mercaptopurine-9-d-riboside, 99+% 574-25-4
1,8-Dihydroxyanthraquinone, 90-95% 117-10-2
Dl-tyrosine, 99% 556-03-6
Gallocyanine 1562-85-2
5-Bromo-4-chloro-3-indolyl-beta-D-glucoside (X-Glucoside) 15548-60-4
Cyclopentanone Oxime 1192-28-5
Diallylamine, 97% 124-02-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net