Search   
MSDS 
:
 1-Naphthalenesulfonyl Chloride, 99%
CAS 
:
 85-46-1
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 85-46-1 |1-Naphthalenesulfonyl Chloride | 99 | 201-609-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Corrosive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract.
Chronic:
None

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Keep container tightly closed. Do not get on skin or in eyes. Do not
ingest or inhale. Use with adequate ventilation. Discard contaminated
shoes. Keep from contact with moist air and steam.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 85-46-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Wear a NIOSH/MSHA
or European Standard EN 149 approved full-facepiece
airline respirator in the positive pressure mode with
emergency escape provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: off-white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 194.0 - 195.0 deg C @ 13.00mm
Freezing/Melting Point: 66.00 - 68.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: C10H7ClO2S
Molecular Weight: 226.68

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Excess heat, strong oxidants, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide,
nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 85-46-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Naphthalenesulfonyl Chloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 85-46-1: No information available.
Canada
CAS# 85-46-1 is listed on Canada's NDSL List.
CAS# 85-46-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 85-46-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/23/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Diethyleneglycol Monoricinoleate 5401-17-2
Potassium, chunks, in mineral oil 7440-09-7
1-Naphthalenesulfonyl Chloride, 99% 85-46-1
2-(2-Chloroethoxy)-ethanol, 99% 628-89-7
1,2-Benzisoxazol-3-yl-diphenyl phosphate, 97%(TLC) 0-01-0
Aminoguanidine Bicarbonate, 98.5% 2582-30-1
2-Methyl-3-hexanol, 98% 617-27-6
3-Amino-1,2,4-Triazine, 97% 1120-99-6
2-Cyanophenol, 99% 611-20-1
2-Phenylpropyl isobutyrate, 98% 65813-53-8
1-Methyl-2-pyrrolidineethanol, 98% 67004-64-2
O-Tolunitrile, 98% 529-19-1
Ammonium Iodide, P.A. 12027-06-4
4-Ethyl-1,3-Dioxolan-2-one 4437-51-8
(-)-2,3-O-Benzylidene-(L)-Threitol, 98% 35572-34-0
1,12-Diaminododecane, 98% 2783-17-7
1,1,2-Trichloro-1,2,2-trifluoroethane 76-13-1
1,1,2-Trichloroethane 79-00-5
Bordeaux R 5858-33-3
Exo-2-Chloro-Syn-7-Hydroxymethyl-5-Oxo-Bicyclo??2.2.1??Heptane, 98% 0-00-1
9-Hydroxyfluorene, 97+% 1689-64-1
Boron tribromide 10035-10-6
6-Hydroxytropinone 5932-53-6
4-Chlorobenzenesulfonic acid (techn), 90% (titr.) 98-66-8
(+)-cis-2(r),3(s)-2,3-dihydroxy-2,3- dihydrobenzonitrile, 98+% (nmr) 138769-96-
Copper chromite, barium promoted 12053-18-8
2,5-Dimethyl-P-Anisaldehyde, 97% 6745-75-1
2,4,5-Trichlorotoluene, 98% 6639-30-1
Meta-Anisoyl Chloride, 99% 1711-05-3
bis(2-Hydroxyethyl)dimethylammonium chloride, 99% 38402-02-7
4-Bromo-2,5-difluoroanisole, 99%
3,5-Dimethoxycinnamic Acid, 99+% Predominantly Trans Isomer 16909-11-8
2-(2-nitro-4-benzoic acid)malondialdehyde
2,6-Difluorobenzoic Acid, 98% 385-00-2
Coumarin 314T, Laser Grade 113869-06-0
2-Methylheptanoic Acid, 98% 1188-02-9
Diethyl phosphite, 98% 64-17-5
3-Aminophenylacetylene, 99% (GC) 54060-30-9
7,12-Dimethylbenz(a)anthracene, 99%(uv-vis) 57-97-6
Bromoxylenol blue, indicator grade 40070-59-5
3-Nitrobenzoic acid, 99% 121-92-6
Neodymium(III)Nitrate Hexahydrate, 99.99% 16454-60-7
4,5-Dichlorophthalic Acid, 99% 56962-08-4
6-Mercaptopurine-9-d-riboside, 99+% 574-25-4
1,8-Dihydroxyanthraquinone, 90-95% 117-10-2
Dl-tyrosine, 99% 556-03-6
Gallocyanine 1562-85-2
5-Bromo-4-chloro-3-indolyl-beta-D-glucoside (X-Glucoside) 15548-60-4
Cyclopentanone Oxime 1192-28-5
Diallylamine, 97% 124-02-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net