Search   
MSDS 
:
 [Tris(trimethylsilyl)]arsenide, 98%
CAS 
:
 17729-30-5
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 17729-30-5 |[Tris(trimethylsilyl)]arsenide | 98% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 23/25

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic by inhalation and if swallowed.The toxicological properties of
this material have not been fully investigated.Moisture sensitive.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Poison by ingestion. The toxicological properties of this substance
have not been fully investigated.
Inhalation:
The toxicological properties of this substance have not been fully
investigated. Toxic if inhaled.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Get medical aid immediately. Wash mouth out with water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Keep under a nitrogen blanket.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 17729-30-5:
United Kingdom, WEL - TWA: (listed as arsenic compounds, n.o.s.):
mg/m3 TWA (except arsine, as As)
United Kingdom, WEL - STEL: (listed as arsenic compounds, n.o.s.)
0.3 mg/m3 STEL (except arsine, as As)
United States OSHA: 0.5 mg/m3 TWA (listed under Arsenic).
Belgium - TWA: (listed as arsenic): 0.01 mg/m3 VLE
Japan: (listed as arsenic compounds, n.o.s.): 3 ??g/m3 OEL (refere
value, as As)
Malaysia: (listed as arsenic): 0.01 mg/m3 TWA
Netherlands: (listed as arsenic): 0.050 mg/m3 MAC
Russia: (listed as silica, amorphous): 1 mg/m3 TWA
Spain: (listed as arsenic compounds, n.o.s.): 0.1 mg/m3 VLA-ED (a
As)

Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: light brown
Odor: stench
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 50 - 53 deg C @ .75
Freezing/Melting Point: 0.5 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .9940g/cm3
Molecular Formula: (Si(CH3)3)As
Molecular Weight: 294.48

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, silicon dioxide, oxides of arsenic.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 17729-30-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
[Tris(trimethylsilyl)]arsenide -
IARC: Group 1 carcinogen (listed as Arsenic).

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ORGANOARSENIC COMPOUND, N.O.S.*
Hazard Class: 6.1
UN Number: 3280
Packing Group: III
IMO
Shipping Name: ORGANOARSENIC COMPOUND, N.O.S.
Hazard Class: 6.1
UN Number: 3280
Packing Group: III
RID/ADR
Shipping Name: ORGANOARSENIC COMPOUND, N.O.S.
Hazard Class: 6.1
UN Number: 3280
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 23/25 Toxic by inhalation and if swallowed.
Safety Phrases:
S 20/21 When using do not eat, drink or smoke.
S 28A After contact with skin, wash immediately with
plenty of water.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 17729-30-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 17729-30-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 17729-30-5 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 1/07/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Monomethyl monopotassiummalonate, 98% 38330-80-2
4-Bromomandelic Acid, 96% (HPLC) 6940-50-7
Stigmasterol, 95% 83-48-7
2-Chloro-6-Nitrotoluene, 99% 83-42-1
[Tris(trimethylsilyl)]arsenide, 98% 17729-30-5
1-Ethylquinaldinium Iodide, 97% (titr.) 606-55-3
L-Aspartyl-L-Phenylalanine Methyl Ester, 98% 22839-47-0
Primaquine diphosphate, 99+% 63-45-6
Ethyl 5-Hydroxy-2-Methylindole-3- Carboxylate 7598-91-6
(R)-(-)-1-Amino-2-Propanol, 98+% 2799-16-8
N-Methylthiourea, 97% 598-52-7
2,3,4,5,6-Pentafluoroanisole, 97+% 389-40-2
Cyclohexene Oxide, 98% 286-20-4
5-beta-Pregnane-3-alpha,20-alpha-diol, 99% 80-92-2
Cyclooctene Oxide, 99% 286-62-4
2-(4-Methoxyphenyl)-4,6-Diphenylpyrylium Tetrafluoroborate 2907-13-3
Sodium Hexafluoroantimonate, 98% (Titr.) 16925-25-0
Ethylene/Acrylic Acid Copolymer 9010-77-9
4-Fluoro-2-Nitrotoluene, 98% 446-10-6
N-Carbethoxy-4-Piperidone, 97+% 29976-53-2
3-Methylhippuric acid,98+% 27115-49-7
Amberlite cg-400 ion-exchange resin 37247-87-3
3-Nitrotoluene, 99% 99-08-1
1,3-Diphenylguanidine, 99% (uv-vis) 102-06-7
2-Bromo-4-Methylaniline, 98% 583-68-6
2,2'-Bithiophene 492-97-7
5,6-Dimethylbenzimidazole, 99+% 582-60-5
4-Butoxyaniline, 99% (titr.) 4344-55-2
Alpha-Cyano-O-Tolunitrile, Tech. 3759-28-2
DL-Laudanosoline Hydrobromide Trihydrate, 98% 485-33-6
4-Chloro-6-Nitro-Meta-Cresol, 99% 7147-89-9
2-Butanone oxime, 99% 96-29-7
Hexachloropropene, 96% 1888-71-7
Isopropyl Chloroacetate, 99% 105-48-6
3-Methylpentane, 99+% 96-14-0
1,4-Cyclohexanedicarboxylic Acid, 96% (Titr.) 1076-97-7
Azoxybenzene, 97% 495-48-7
l-(+)-Lactic acid, lithium salt 27848-80-2
4-Hexylresorcinol, 99% 136-77-6
Tantalum (V) Chloride, 99.9% 7721-01-9
2,4,5-Trimethylthiazole, 99% 13623-11-5
Cycloheptane, 99% 291-64-5
Phenylglyoxal monohydrate, 97% 1074-12-0
Ethyl Carbazate, 97% 4114-31-2
bis(Methylthio)methane, 99+% 1618-26-4
1-Bromo-4-Tert-Butylbenzene, 97+% 3972-65-4
(S)-(+)-2-Amino-2-methylbutanoic acid monohydrate, 99+% (>99% e.e.) 0-00-0
2-Furonitrile, 99% 617-90-3
l-Adrenaline, 97% (titr.) 51-43-4
4-(3-Methyl-5-oxo-2-pyrazolin-1-yl)benzoic acid, 98+% 60875-16-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net