Search   
MSDS 
:
 3-Methylpentane, 99+%
CAS 
:
 96-14-0
SYNONYMS 
:
 Diethylmethylmethane.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 96-14-0 |3-Methylpentane | >99 | 202-481-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause central nervous system depression, characterized
by excitement, followed by headache, dizziness, drowsiness, and
nausea. Advanced stages may cause collapse, unconsciousness, coma
and possible death due to respiratory failure. Aspiration of
material into the lungs may cause chemical pneumonitis, which may be
fatal.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Extremely
flammable. Material will readily ignite at room temperature.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use foam, dry
chemical, or carbon dioxide. Water may be ineffective.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Use
spark-proof tools and explosion proof equipment. Avoid contact with
skin and eyes. Take precautionary measures against static discharges.
Do not ingest or inhale.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 96-14-0:

Germany: 200 ppm TWA; 720 mg/m3 TWA
Netherlands: 200 ppm MAC; 720 mg/m3 MAC

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: Gasoline-like odor
pH: Not available.
Vapor Pressure: 400 mm Hg @10.5
Viscosity: Not available.
Boiling Point: 64 deg C @ 760.00mm Hg
Freezing/Melting Point: -118 deg C
Autoignition Temperature: Not available.
Flash Point: -6 deg C ( 21.20 deg F)
Explosion Limits, lower: 1.20 vol %
Explosion Limits, upper: 7.70 vol %
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: .6640g/cm3
Molecular Formula: C6H14
Molecular Weight: 86.18

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
None reported.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 96-14-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3-Methylpentane -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: HEXANES
Hazard Class: 3
UN Number: 1208
Packing Group: II
IMO
Shipping Name: HEXANES
Hazard Class: 3.1
UN Number: 1208
Packing Group: II
RID/ADR
Shipping Name: HEXANES
Hazard Class: 3
UN Number: 1208
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 29 Do not empty into drains.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 96-14-0: 1
Canada
CAS# 96-14-0 is listed on Canada's DSL List.
CAS# 96-14-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 96-14-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #3 Date: 10/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Monomethyl monopotassiummalonate, 98% 38330-80-2
4-Bromomandelic Acid, 96% (HPLC) 6940-50-7
Stigmasterol, 95% 83-48-7
2-Chloro-6-Nitrotoluene, 99% 83-42-1
[Tris(trimethylsilyl)]arsenide, 98% 17729-30-5
1-Ethylquinaldinium Iodide, 97% (titr.) 606-55-3
L-Aspartyl-L-Phenylalanine Methyl Ester, 98% 22839-47-0
Primaquine diphosphate, 99+% 63-45-6
Ethyl 5-Hydroxy-2-Methylindole-3- Carboxylate 7598-91-6
(R)-(-)-1-Amino-2-Propanol, 98+% 2799-16-8
N-Methylthiourea, 97% 598-52-7
2,3,4,5,6-Pentafluoroanisole, 97+% 389-40-2
Cyclohexene Oxide, 98% 286-20-4
5-beta-Pregnane-3-alpha,20-alpha-diol, 99% 80-92-2
Cyclooctene Oxide, 99% 286-62-4
2-(4-Methoxyphenyl)-4,6-Diphenylpyrylium Tetrafluoroborate 2907-13-3
Sodium Hexafluoroantimonate, 98% (Titr.) 16925-25-0
Ethylene/Acrylic Acid Copolymer 9010-77-9
4-Fluoro-2-Nitrotoluene, 98% 446-10-6
N-Carbethoxy-4-Piperidone, 97+% 29976-53-2
3-Methylhippuric acid,98+% 27115-49-7
Amberlite cg-400 ion-exchange resin 37247-87-3
3-Nitrotoluene, 99% 99-08-1
1,3-Diphenylguanidine, 99% (uv-vis) 102-06-7
2-Bromo-4-Methylaniline, 98% 583-68-6
2,2'-Bithiophene 492-97-7
5,6-Dimethylbenzimidazole, 99+% 582-60-5
4-Butoxyaniline, 99% (titr.) 4344-55-2
Alpha-Cyano-O-Tolunitrile, Tech. 3759-28-2
DL-Laudanosoline Hydrobromide Trihydrate, 98% 485-33-6
4-Chloro-6-Nitro-Meta-Cresol, 99% 7147-89-9
2-Butanone oxime, 99% 96-29-7
Hexachloropropene, 96% 1888-71-7
Isopropyl Chloroacetate, 99% 105-48-6
3-Methylpentane, 99+% 96-14-0
1,4-Cyclohexanedicarboxylic Acid, 96% (Titr.) 1076-97-7
Azoxybenzene, 97% 495-48-7
l-(+)-Lactic acid, lithium salt 27848-80-2
4-Hexylresorcinol, 99% 136-77-6
Tantalum (V) Chloride, 99.9% 7721-01-9
2,4,5-Trimethylthiazole, 99% 13623-11-5
Cycloheptane, 99% 291-64-5
Phenylglyoxal monohydrate, 97% 1074-12-0
Ethyl Carbazate, 97% 4114-31-2
bis(Methylthio)methane, 99+% 1618-26-4
1-Bromo-4-Tert-Butylbenzene, 97+% 3972-65-4
(S)-(+)-2-Amino-2-methylbutanoic acid monohydrate, 99+% (>99% e.e.) 0-00-0
2-Furonitrile, 99% 617-90-3
l-Adrenaline, 97% (titr.) 51-43-4
4-(3-Methyl-5-oxo-2-pyrazolin-1-yl)benzoic acid, 98+% 60875-16-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net