**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 492-97-7 |2,2'-Bithiophene | 100 | 207-767-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
refrigerated. (Store below 4C/39F.)
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 492-97-7:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: yellow to green
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 260 deg C @ 760.00mm Hg
Freezing/Melting Point: 33 deg C
Autoignition Temperature: Not available.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C8H6S2
Molecular Weight: 166.27
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 492-97-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,2'-Bithiophene -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 492-97-7: No information available.
Canada
CAS# 492-97-7 is listed on Canada's DSL List.
CAS# 492-97-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 492-97-7 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 2/17/1999 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Monomethyl monopotassiummalonate, 98%
| 38330-80-2 |
|
4-Bromomandelic Acid, 96% (HPLC)
| 6940-50-7 |
|
Stigmasterol, 95%
| 83-48-7 |
|
2-Chloro-6-Nitrotoluene, 99%
| 83-42-1 |
|
[Tris(trimethylsilyl)]arsenide, 98%
| 17729-30-5 |
|
1-Ethylquinaldinium Iodide, 97% (titr.)
| 606-55-3 |
|
L-Aspartyl-L-Phenylalanine Methyl Ester, 98%
| 22839-47-0 |
|
Primaquine diphosphate, 99+%
| 63-45-6 |
|
Ethyl 5-Hydroxy-2-Methylindole-3- Carboxylate
| 7598-91-6 |
|
(R)-(-)-1-Amino-2-Propanol, 98+%
| 2799-16-8 |
|
N-Methylthiourea, 97%
| 598-52-7 |
|
2,3,4,5,6-Pentafluoroanisole, 97+%
| 389-40-2 |
|
Cyclohexene Oxide, 98%
| 286-20-4 |
|
5-beta-Pregnane-3-alpha,20-alpha-diol, 99%
| 80-92-2 |
|
Cyclooctene Oxide, 99%
| 286-62-4 |
|
2-(4-Methoxyphenyl)-4,6-Diphenylpyrylium Tetrafluoroborate
| 2907-13-3 |
|
Sodium Hexafluoroantimonate, 98% (Titr.)
| 16925-25-0 |
|
Ethylene/Acrylic Acid Copolymer
| 9010-77-9 |
|
4-Fluoro-2-Nitrotoluene, 98%
| 446-10-6 |
|
N-Carbethoxy-4-Piperidone, 97+%
| 29976-53-2 |
|
3-Methylhippuric acid,98+%
| 27115-49-7 |
|
Amberlite cg-400 ion-exchange resin
| 37247-87-3 |
|
3-Nitrotoluene, 99%
| 99-08-1 |
|
1,3-Diphenylguanidine, 99% (uv-vis)
| 102-06-7 |
|
2-Bromo-4-Methylaniline, 98%
| 583-68-6 |
|
2,2'-Bithiophene
| 492-97-7 |
|
5,6-Dimethylbenzimidazole, 99+%
| 582-60-5 |
|
4-Butoxyaniline, 99% (titr.)
| 4344-55-2 |
|
Alpha-Cyano-O-Tolunitrile, Tech.
| 3759-28-2 |
|
DL-Laudanosoline Hydrobromide Trihydrate, 98%
| 485-33-6 |
|
4-Chloro-6-Nitro-Meta-Cresol, 99%
| 7147-89-9 |
|
2-Butanone oxime, 99%
| 96-29-7 |
|
Hexachloropropene, 96%
| 1888-71-7 |
|
Isopropyl Chloroacetate, 99%
| 105-48-6 |
|
3-Methylpentane, 99+%
| 96-14-0 |
|
1,4-Cyclohexanedicarboxylic Acid, 96% (Titr.)
| 1076-97-7 |
|
Azoxybenzene, 97%
| 495-48-7 |
|
l-(+)-Lactic acid, lithium salt
| 27848-80-2 |
|
4-Hexylresorcinol, 99%
| 136-77-6 |
|
Tantalum (V) Chloride, 99.9%
| 7721-01-9 |
|
2,4,5-Trimethylthiazole, 99%
| 13623-11-5 |
|
Cycloheptane, 99%
| 291-64-5 |
|
Phenylglyoxal monohydrate, 97%
| 1074-12-0 |
|
Ethyl Carbazate, 97%
| 4114-31-2 |
|
bis(Methylthio)methane, 99+%
| 1618-26-4 |
|
1-Bromo-4-Tert-Butylbenzene, 97+%
| 3972-65-4 |
|
(S)-(+)-2-Amino-2-methylbutanoic acid monohydrate, 99+% (>99% e.e.)
| 0-00-0 |
|
2-Furonitrile, 99%
| 617-90-3 |
|
l-Adrenaline, 97% (titr.)
| 51-43-4 |
|
4-(3-Methyl-5-oxo-2-pyrazolin-1-yl)benzoic acid, 98+%
| 60875-16-3 |
|
|