Search   
MSDS 
:
 (R)-(-)-1-Amino-2-Propanol, 98+%
CAS 
:
 2799-16-8
SYNONYMS 
:
 R-(-)-Isopropanolamine
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2799-16-8 |(R)-(-)-1-Amino-2-Propanol | >98 | 220-532-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Hygroscopic (absorbs moisture from the air).Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause cyanosis of the extremities. May cause
skin rash (in milder cases), and cold and clammy skin with cyanosis
or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. May
cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Causes gastrointestinal tract burns. May cause perforation
of the digestive tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. May cause systemic effects. Inhalation at high
concentrations may cause CNS depression and asphixiation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Water may be ineffective.
Material is lighter than water and a fire may be spread by the use of
water. Combustible liquid. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas.
Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Do not ingest or
inhale. Discard contaminated shoes. Do not pressurize, cut, weld,
braze, solder, drill, grind, or expose empty containers to heat,
sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2799-16-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: white - light yellow - colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: < 1 mm Hg @ 20C
Viscosity: Not available.
Boiling Point: 160 deg C @ 760.00mm Hg
Freezing/Melting Point: 23.00 - 26.00 deg C
Autoignition Temperature: 335 deg C ( 635.00 deg F)
Flash Point: 71 deg C ( 159.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density: .9540g/cm3
Molecular Formula: C3H9NO
Molecular Weight: 75.11

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, exposure to
moist air or water.
Incompatibilities with Other Materials:
Moisture, strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2799-16-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
(R)-(-)-1-Amino-2-Propanol -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, SOLID, CORROSIVE, N.O.S.*
Hazard Class: 8
UN Number: 3259
Packing Group: III
IMO
Shipping Name: AMINES, SOLID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 3259
Packing Group: III
RID/ADR
Shipping Name: AMINES, SOLID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 3259
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36 Wear suitable protective clothing.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 2799-16-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 2799-16-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2799-16-8 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Monomethyl monopotassiummalonate, 98% 38330-80-2
4-Bromomandelic Acid, 96% (HPLC) 6940-50-7
Stigmasterol, 95% 83-48-7
2-Chloro-6-Nitrotoluene, 99% 83-42-1
[Tris(trimethylsilyl)]arsenide, 98% 17729-30-5
1-Ethylquinaldinium Iodide, 97% (titr.) 606-55-3
L-Aspartyl-L-Phenylalanine Methyl Ester, 98% 22839-47-0
Primaquine diphosphate, 99+% 63-45-6
Ethyl 5-Hydroxy-2-Methylindole-3- Carboxylate 7598-91-6
(R)-(-)-1-Amino-2-Propanol, 98+% 2799-16-8
N-Methylthiourea, 97% 598-52-7
2,3,4,5,6-Pentafluoroanisole, 97+% 389-40-2
Cyclohexene Oxide, 98% 286-20-4
5-beta-Pregnane-3-alpha,20-alpha-diol, 99% 80-92-2
Cyclooctene Oxide, 99% 286-62-4
2-(4-Methoxyphenyl)-4,6-Diphenylpyrylium Tetrafluoroborate 2907-13-3
Sodium Hexafluoroantimonate, 98% (Titr.) 16925-25-0
Ethylene/Acrylic Acid Copolymer 9010-77-9
4-Fluoro-2-Nitrotoluene, 98% 446-10-6
N-Carbethoxy-4-Piperidone, 97+% 29976-53-2
3-Methylhippuric acid,98+% 27115-49-7
Amberlite cg-400 ion-exchange resin 37247-87-3
3-Nitrotoluene, 99% 99-08-1
1,3-Diphenylguanidine, 99% (uv-vis) 102-06-7
2-Bromo-4-Methylaniline, 98% 583-68-6
2,2'-Bithiophene 492-97-7
5,6-Dimethylbenzimidazole, 99+% 582-60-5
4-Butoxyaniline, 99% (titr.) 4344-55-2
Alpha-Cyano-O-Tolunitrile, Tech. 3759-28-2
DL-Laudanosoline Hydrobromide Trihydrate, 98% 485-33-6
4-Chloro-6-Nitro-Meta-Cresol, 99% 7147-89-9
2-Butanone oxime, 99% 96-29-7
Hexachloropropene, 96% 1888-71-7
Isopropyl Chloroacetate, 99% 105-48-6
3-Methylpentane, 99+% 96-14-0
1,4-Cyclohexanedicarboxylic Acid, 96% (Titr.) 1076-97-7
Azoxybenzene, 97% 495-48-7
l-(+)-Lactic acid, lithium salt 27848-80-2
4-Hexylresorcinol, 99% 136-77-6
Tantalum (V) Chloride, 99.9% 7721-01-9
2,4,5-Trimethylthiazole, 99% 13623-11-5
Cycloheptane, 99% 291-64-5
Phenylglyoxal monohydrate, 97% 1074-12-0
Ethyl Carbazate, 97% 4114-31-2
bis(Methylthio)methane, 99+% 1618-26-4
1-Bromo-4-Tert-Butylbenzene, 97+% 3972-65-4
(S)-(+)-2-Amino-2-methylbutanoic acid monohydrate, 99+% (>99% e.e.) 0-00-0
2-Furonitrile, 99% 617-90-3
l-Adrenaline, 97% (titr.) 51-43-4
4-(3-Methyl-5-oxo-2-pyrazolin-1-yl)benzoic acid, 98+% 60875-16-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net