Search   
MSDS 
:
 2,6-Dichlorobenzylchloride, 97%
CAS 
:
 2014-83-7
SYNONYMS 
:
 alpha,2,6-Trichlorotoluene
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2014-83-7 |2,6-Dichlorobenzylchloride | 97.0 | 217-940-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.The toxicological properties of this material have not
been fully investigated.Moisture sensitive.

Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns.
Skin:
May cause severe skin irritation and burns.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
The toxicological properties of this substance have not been fully
investigated. Inhalation of dust may cause respiratory tract
irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Do NOT get water inside containers. For small fires, use dry
chemical, carbon dioxide, or water spray. For large fires, use dry
chemical, carbon dioxide, alcohol-resistant foam, or water spray.
Cool containers with flooding quantities of water until well after
fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Do not get water inside
containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2014-83-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: 0.07 hPa @ 20 deg C
Viscosity: Not available.
Boiling Point: 117 - 119 deg C @ 14.00mm Hg
Freezing/Melting Point: 36 - 39 deg C
Autoignition Temperature: > 450 deg C (> 842.00 deg F)
Flash Point: 112 deg C ( 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: >350 deg C
Solubility in water: may decompose in water
Specific Gravity/Density:
Molecular Formula: C7H5Cl3
Molecular Weight: 195.48

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Bases, amines, oxidizing agents, alcohols. Corrodes steel.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide.
Hazardous Polymerization: May occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2014-83-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,6-Dichlorobenzylchloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3261
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 2014-83-7: 3
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 2014-83-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2014-83-7 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
FMOC-L-Tryptophan, 99% 35737-15-6
5-Acetylamido-2-chloroaniline, 98% 51867-83-5
3'-Aminoacetanilide, 98% 102-28-3
Cellulose Acetate, Average M.W. 52000 9004-35-7
FMOC-L-Methionine, 98% 71989-28-1
Methyl iodide 74-88-4
Polyvinylpyrrolidone Average M.W. 360.000 9003-39-8
Phenolphthalin 81-90-3
1H-Indole-3-Acetic Acid,99+% 87-51-4
Boc-L-Aspartic Acid 4-Benzylester, 99+% 7536-58-5
Phenosafranin 81-93-6
Bromotriethylgermane 1067-10-3
4,5-Dimethyl-2-Nitroaniline, 97% 6972-71-0
3-Methacryloyloxypropyltris(Trimethylsilyloxy)Silane, 98% 17096-07-0
Ammonium nitrate, reagent ACS, crystals 6484-52-2
Boc-L-Tryptophane, 97% 13139-14-5
3,4,5,6-Tetrabromo-o-cresol, 98% 576-55-6
Sodium Hydroxide Solution 2-4% 1310-73-2
3-(4-Bromobenzoyl)Propionic Acid 6340-79-0
Copper(II) nitrate, trihydrate, p.a. 3251-23-8
Sodium Molybdate (VI) Dihydrate, 99+% 7631-95-0
Glutaric Dialdehyde, 25% Solution in Water E.M. Grade, Purified 111-30-8
Glutaric Dialdehyde (50% in water) 111-30-8
Sulfuric acid, 1N standard solution 7664-93-9
Ethyl Eosin 21514-87-4
Sodium Hydroxide Solution 0.4 - 0.04% 1310-73-2
BOC-L-Proline, 99+% 15761-39-4
5-Fluorouridine, 99+% 316-46-1
Boc-L-Glutamine, 99+% 13726-85-7
(S)-(+)-2,2-Dimethyl-1,3-dioxolane-4- methanol, 98% 22323-82-6
Heptadecafluorononanoic Acid, 97% 375-95-1
2-(p-Chlorobenzyl)benzimidazole 5468-66-6
Lithium, Granular, Dry 7439-93-2
2-Amino-4,6-dimethylpyrimidine, 98% 767-15-7
trans-3-(3-Pyridyl)acrylic acid 19337-97-4
Pyronin B, certified 2150-48-3
Methyl 2-cyclopentanonecarboxylate 10472-24-9
8-Amino-2-naphthol, 98% 118-46-7
2,5-Dimethyl-1,5-hexadiene 627-58-7
Tetramethyltetraselenafulvalene 55259-49-9
Gallium(III) perchlorate, 50% solution in water 7732-18-5
1-Naphthyl phosphate calcium salt trihydrate 17805-69-5
4-Nitrobenzyl chloroformate, 97% 4457-32-3
(S)-3-Acetoxy-gamma-Butyrolactone, 95% 191403-65-3
4-Methoxyphenyl isocyanate, 99% 5416-93-3
N-Pivaloyl-o-toluidine 61495-04-3
N-Pivaloyl-o-Benzylaniline, 99% 85864-33-1
trans-4-Aminocyclohexanol, 97% 27489-62-9
D-(-)-Phenylglycinamide, 99% 0-01-1
2,6-Dichlorobenzylchloride, 97% 2014-83-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net